Reviews
Fits: HONDA CRF250 RALLY, YAMAHA YZ450F, YAMAHA WR250R, YAMAHA WR250X
The OEM Exhaust System for WR250X/R includes (?) It's not working
D31-41-650 was used for WR250X.
As a result, it is not possible to pimp the OEM Exhaust System.
All the inner diameter outer diameter all the lengths are no good, it was torn when I put it in the OEMManifold side….
I wonder if the quality is not consistent because some of my predecessors can't use it and some can use it normally.
View detail
Fits: HONDA CRF250 RALLY, YAMAHA YZ450F, YAMAHA WR250R, YAMAHA WR250X
Required Items for Silencer Replacement
It is an essential Items when replacing Silencer,
When newly fitting the exhaust pipe, install it on the exhaust pipe side rather than putting it in the silencer side.
I think it would be smoother to put the Silencer side over the Silencer side.
View detail
Fits: KAWASAKI KLX150, KAWASAKI KLX125, KAWASAKI D Tracker 125
With especially no problem
With especially no problem View detail
Fits: HONDA CRF250 RALLY, YAMAHA YZ450F, YAMAHA WR250R, YAMAHA WR250X
DRC EXHAUST JOINT GASKET
Thank you, WEBIKE! I didn't think I would ever find the right part. This exhaust joint gasket fits the Delta Barrel 4 Exhaust. I didn't have a caliper to measure the exact fit of the exhaust joint and they smash after use. So I didn't know the actual size I needed. It was proving quite difficult. My exhaust wouldn't fit without it. I now have it am I'm very pleased with the product. Thanks again, WEBIKE. View detail
Fits: KAWASAKI KLX150, KAWASAKI KLX125, KAWASAKI D Tracker 125
The last one.
I bought it again because it was new and somehow it got into the back of the MiddlePipe.
I've bought JMCA Certified for places where I can't run without changing the exhaust system many times, but the quality is usually fine.
View detail
Fits: KAWASAKI KLX150, KAWASAKI KLX125, KAWASAKI D Tracker 125
Is good
I bought it for when I removed and adjusted the Exhaust System in spring and adjusted it afterwards.
The product will be purchased for the third time.
There are BALI on the cut surface, but it is acceptable range.
I always find it useful.
View detail
Fits: HONDA CRF250 RALLY, YAMAHA YZ450F, YAMAHA WR250R, YAMAHA WR250X
It does not match wr250x
We did this because we did not deal with Yamaha OEM Product with Webike, but it does not enter Exhaust at all for wr 250 x. I forcibly cut it with File and forcibly put it in. I will never buy this product again! It is annoying !! View detail
Fits: KAWASAKI KLX150, KAWASAKI KLX125, KAWASAKI D Tracker 125
It was necessary to return to KLX 125 OEM.
You can use it without any problem.
It is recommended.
I think that it is convenient because it can buy it with Net.
If you are worried I think that OEM can also be bought here.
View detail
Fits: KAWASAKI D tracker, KAWASAKI KLX250, SUZUKI 250SB
It is a Gasket of the connection section of a Silencer and an Exhaust pipe. If it reuses here, omission in exhaust steam of most will be carried out.It is mere a few.It reused, although a loud sound did not come out, omission in exhaust steam was carr
It is a Gasket of the connection section of a Silencer and an Exhaust pipe.
If it reuses here, omission in exhaust steam of most will be carried out.It is mere a few.It reused, although a loud sound did not come out, omission in exhaust steam was carried out half a year, and since it was sick, it exchanged in passing.
It is equivalent in it being pure.There is what no fault.Certainly [ way it sometimes held up the hand to the joint part and checked the omission in exhaust steam ].
View detail
Fits: KAWASAKI KLX150, KAWASAKI KLX125, KAWASAKI D Tracker 125
purchasing last time at the time of Muffler exchange -- necessity -- since it was enough, it re-purchased this time to compensate for EX pipe replacement.A function is satisfactory and good to be able to purchase somewhat cheaply pure.
purchasing last time at the time of Muffler exchange -- necessity -- since it was enough, it re-purchased this time to compensate for EX pipe replacement.A function is satisfactory and good to be able to purchase somewhat cheaply pure. View detail
Fits: KAWASAKI KLX150, KAWASAKI KLX125, KAWASAKI D Tracker 125
It chose by the ease of carrying out of acquisition.Even if it compares that it is pure, there is no difference of appearance, and the engine performance as a Gasket and a function are enough.Although the rest is durability, probably, it will be satisfact
It chose by the ease of carrying out of acquisition.Even if it compares that it is pure, there is no difference of appearance, and the engine performance as a Gasket and a function are enough.Although the rest is durability, probably, it will be satisfactory. View detail
Fits: YAMAHA XT250X, YAMAHA TW225E, YAMAHA TW200E, YAMAHA CELLOW 225, YAMAHA Selo 225S, YAMAHA Cerro 225W, YAMAHA Serow 225WE, YAMAHA Cerro 250, YAMAHA tricker, YAMAHA TW200
It was used when attaching Barrel 4 of DELTA to a SEROW250. Since in the case of the SEROW a Gasket is attached to a Normal silencer and it Says, this is removed and reuse is difficult. It is easier in the case of NORMAL return to leave ra
It was used when attaching Barrel 4 of DELTA to a SEROW250.
Since in the case of the
SEROW a Gasket is attached to a Normal silencer and it
Says, this is removed and reuse is difficult.
It is easier in the case of NORMAL return to leave rather.
although it is almost equivalent in
(although not returned)
thing being pure -- the Barrel 4 side side and the Exhaust-pipe side --
-- it was slow.
(Individual specificity ?)
Since there seemed to be no problem when fastening, but it was a sense and it hard to work,
heat-resistant Gasket was applied thinly and it fixed.
There is no exhaust leakage as a result of
.
It is although it is natural and becomes empty.
View detail
Fits: KAWASAKI KLX150, KAWASAKI KLX125, KAWASAKI D Tracker 125
They are the necessaries at the time of use muffler exchange in KLX125. Let's certainly use a new article at the time of exchange.
They are the necessaries at the time of use muffler exchange in KLX125.
Let's certainly use a new article at the time of exchange.
View detail
It purchased at the same time it purchased barrel 4 silencer. Since the exhaust leakage after muffler exchange also affected subsequent that it can blow going up and carburetor adjustment, reuse of the pure gasket was not considered. When it refer
It purchased at the same time it purchased barrel 4 silencer.
Since the exhaust leakage after muffler exchange also affected subsequent that it can blow going up and carburetor adjustment, reuse of the pure gasket was not considered.
When it refers to a net, as there is exhaust leakage by establishment with splendid muffler clearing work, the liquid gasket for seal seems to be necessaries.
From now on, it will be a permatex. I think that a high-heat-resistance silicon gasket will be purchased.
View detail
Fits: KAWASAKI KLX150, KAWASAKI KLX125, KAWASAKI D Tracker 125
It purchased for muffler exchange of [Webike monitor] klx125. Since the engine performance is an ordinary joint gasket, it is common. But since exhaust leakage has not carried out, it has been satisfied.
It purchased for muffler exchange of [Webike monitor] klx125.
Since the engine performance is an ordinary joint gasket, it is common.
But since exhaust leakage has not carried out, it has been satisfied.
View detail
Fits: HONDA CRF250 RALLY, YAMAHA YZ450F, YAMAHA WR250R, YAMAHA WR250X
Although inserted in a mid pipe, troubles were very suffered. Troubles were suffered although it was what may have a firm feeling.
Although inserted in a mid pipe, troubles were very suffered.
Troubles were suffered although it was what may have a firm feeling.
View detail
Fits: HONDA CRF150R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250X, HONDA XR250, HONDA XR400R, SUZUKI DR-Z400S, SUZUKI DR-Z400SM
(>=
(>= View detail