Reviews
Fender Eliminator Kit for ZX-10R 2016
This product is marked for 2016, but can be used for 2019 models after Minor without problems.
I was looking for a Fender Eliminator Kit that looked somewhat nice in shape and chose this product. It was a bit chunkier than I expected and not as stylish as I wanted it to be, but I am generally satisfied with it. LOL!
This product is available in Black Gel and Carbon etc. Variations are available, but I do not like Carbon very much, so I purchased Black Gel and finished it with Matte Black, a two-component urethane paint. After all, Material:Because it is an FRP product, it was distorted and a little difficult to install.
The Fender Eliminator KitBody has φ6.5 holes in the mounting area, but if you want to put the License Plate and Blinker straight back, the clearance of the holes is not enough. I re-drilled all the holes with φ8 and adjusted them as I went along.
But the above processing is just processing because I am a nervous wreck. If you don't mind, you won't mind at all.
View detail
If only the accuracy were a little better...
The OEMFender removal was a little Large weird, I bought the FRP one and it looks perfect, both in texture and looks!
However, the position of the hole on the License Plate is not the same as that on the Quantity:Pair (for Left and Right) It was not symmetrical, and the Fender itself moved up and down with the supplied Bolt, so a little ingenuity was required to install it.
View detail
Carbon is the best choice
Normal fender is awkward, so I used Fender Eliminator With Refreshing
Material:I also like the Carbon Style so I decided to go with Magical, which is also well made
Blinker and Number, etc. are OEM diversions
View detail
Large It is a Fender Eliminator with a human touch..
It is a change from a certain Manufacturer. When I removed the Normal fender I changed the place to Magical so it seemed cheesy because I had to close the place where the hole was opened with Seal etc so it was the correct answer!
First of all, in order to attach a Plate like the Base pedestal, the hole in the back is invisible and Parenthesis can be seen well.
After attaching the attachment part of Number divided into two, it is completed. Twink Carbon Tank protector was also Magical It was good to have a sense of unity.
I would like to Recommendation to those who will be added.
View detail
Parenthesis good!
Since SmallRCSeries has a long Rear Fender
When you install it the Style will change a lot.
Personally it makes me feel a bit Mischief?
I was hesitant to purchase and purchase FRPBlack unexpectedly at the time of Sale.
Because it was Made-to-Order without stock, the delivery date was prepared for 1 month
I received it in one week.
As a result, there is atmosphere like NORMAL when actually wearing
I regret that I should purchase it faster.
There was a little gap in the mounting hole of Blinker
It was easy to fix with iron bar file.
In addition, when we measured with a simple weight scale, we were lighter by about 1 kg.
I am giving up on mud and Small stone bouncing
I think that it is a satisfactory product even if you sacrifice it!
View detail
Defective LED Tail Lamp included
Attached LED Tail lamp Totally not shining.
I am sorry to the appearance though it is cool.
I am going to deal with it by attaching something in Universal's Tail lamp...
View detail
As expected Magical racing
It is a product of beautiful Carbon.
Drilling and additional work are unnecessary for installation.
Although it is not a problem of this product, the exchange of Rear Fender of CBR 20RR needs to remove to Rear seat cowl and under Cowl under Seat. Because it thought that it was easier, it takes a lot of time unexpectedly.
This product's License Plate Light and Blinker use OEM, but Numberetc. It is a little disgusting because it is visible.
Looking from the back, the light emitting part can be seen and it is bad.
Blinker is a structure that comes up on Number, unlike Type that comes out from the side of Number like products of other Manufacturer. I think that likes and dislikes are separated.
There seems to be some products that License Plate Light hides in the place where OEMFender was growing, so why would you consider that one?.
In any case, Material : I think that Carbon's Fender Eliminator is only about Magical, so it is recommended to show it at One point.
View detail
After accident repair
Following the repair that was hit around Number, we ordered via store and asked for installation.
I have no idea about the accuracy of the mounting hole as it is left to the shop, but it is attached to the Beauty without the installation being tilted, in particular.
Bracket of the License lamp seems to be a common part, but Body is twill weave against plain weave, so if you want to unify the atmosphere at all, I want you to make it black.
Material of Body : Carbon Style seems to be only in the visible range, and the inner part is FRP? It does not matter, but there are some areas where you can see where the bubbles entering the switch become Crater and appear on the surface, That's a pity.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
-izing can be carried out [ Fender less ] by a necessary minimum Parts. It can be used in the present state, such as a pure accessory case and an in-vehicle tool. Since work does not take time, it is saved.
-izing can be carried out [ Fender less ] by a necessary minimum Parts. It can be used in the present state, such as a pure accessory case and an in-vehicle tool. Since work does not take time, it is saved. View detail
Two months and a half waited from the order for vendor specification change. I think that the former thing of the changed part was better in appearance as the Number and the Parts for Blinkers were set to FRP from the Carbon. Although I think that i
Two months and a half waited from the order for vendor specification change.
I think that the former thing of the
changed part was better in appearance as the Number and the Parts for Blinkers were set to FRP from the Carbon.
Although I think that it is for
insufficient strength -- A footing is a cinch.
When attaching
pure Blinker, the device was required for the Nut side, and he prepared and attached the Bolt of sus6mm, a Nut, sw, and w.
I think that
accuracy and appearance are Number ones.
View detail
An amateur can attach easily! It is the work of 1 to 2 hours referring to a description. Around the rear becomes sharp and it has an angle to the number! However, since it is a little bent, it is four stars!
An amateur can attach easily! It is the work of 1 to 2 hours referring to a description. Around the rear becomes sharp and it has an angle to the number! However, since it is a little bent, it is four stars! View detail
[ -- the Webike Monitor ] -- the Fender less kit was attached for the first time. I, the beginners, was also completed in about 3 hours. Since it is that a description starts in , however the state where the Rear cowl is removed, I think that
[ -- the Webike Monitor ]
-- the Fender less kit was attached for the first time.
I, the
beginners, was also completed in about 3 hours.
Since it is that a description starts in
, however the state where the Rear cowl is removed, I think that it is a little unkind.
There is no wiring diagram in a description and it suffered troubles.
I consider it more eager to enforce, after collecting information in the
Net.
I think that the quality of the
article itself is high.
View detail
[Webike Monitor] Processing of the Parts itself is also unnecessary, and it is a Bolt on. If the description of attachment is seen, any problem cannot be found in attachment of a Parts, but how to connect wiring of LED which illuminates how to let
[Webike Monitor] Processing of the
Parts itself is also unnecessary, and it is a Bolt on.
If the description of
attachment is seen, any problem cannot be found in attachment of a Parts, but how to connect wiring of LED which illuminates how to let why or wiring pass and a Number plate etc. do not appear at all.
Although it connects with attached wiring connectors, when there is no knowledge, it may worry about LED wiring.
Work is easy if the way which removes wiring of an after [
] Blinker by the Blinker main part side is known.
Although the Fender less kit of the
STREET TRIPLE has many things in which an identity is not found, I think that this product is made directly.
Since the
Reflector is not attached, it needs to be purchased separately.
View detail
The fender less kit was attached for the first time. I, beginners, was also completed in about 3 hours. However, since it is that a description starts in the state where the rear cowl is removed, I think that it is a little unkind. There is no
The fender less kit was attached for the first time.
I, beginners, was also completed in about 3 hours.
However, since it is that a description starts in the state where the rear cowl is removed, I think that it is a little unkind.
There is no wiring diagram in a description and it suffered troubles.
I consider it more eager to enforce, after collecting information in a net.
I think that the quality of the article itself is high.
View detail
Although an order for [Webike-monitor] twill was placed, the portion into which a number LGT shines just was a plain weave. Although it is specification, I wanted you to make it into twill also there. A one [ be / the first time / this / that it a
Although an order for [Webike-monitor] twill was placed, the portion into which a number LGT shines just was a plain weave.
Although it is specification, I wanted you to make it into twill also there.
A one [ be / the first time / this / that it attaches to two A4 sizes (one substance), and a figure says two like this with the description in which an explanatory note is very simple at about six lines ] was able to regard the attachment description as slightly unkind.
I think that back felt the result very refreshed and it became smart.
View detail