Reviews
Light weight, slim type Fender.
[How is it used?
Introduced with the aim of reducing the weight and slimming down the shape of the Front Fender.
Was the one you received as per Image?
The design is good and the quality is good. The carbon is a little thin in some areas, but this contributes to the lightness of the product.
Was the installation difficult?
It is easier but better to remove the front tire and work on it.
How was your experience with it?
Design is good as per Image.
[Included Parts:were they on?
Kit only for installation.
[Was there anything that disappointed you?
Compared to Striker's Chain Cover, I felt the carbon was a little thin, but I don't think this is a problem. I think it's fine,
View detail
To!
Plain weave is better Parenthesis than twill weave!
I used to be obsessed with twill weave, but plain weave was cheaper than twill weave, so I ordered plain weave on the spur of the moment and discovered the advantages of plain weave… lol
View detail
Magical Believers
I have been interested in this product for a long time, and I happened to know that it was in stock. I have been looking forward to using it for a long time, and it just happened to be in stock. View detail
One smart with carbon and light is good. F. Faulk's cover is large and safe.
One smart with carbon and light is good.
F. Faulk's cover is large and safe.
View detail
This time A front/rear A fender and a chain cover. although purchased A little unreasonableness has a hole location of attachment, and the result is not good considering a price. again -- a front/rear one Fender There is also no hole for a brake hose
This time A front/rear A fender and a chain cover.
although purchased A little unreasonableness has a hole location of attachment, and the result is not good considering a price. again -- a front/rear one Fender There is also no hole for a brake hose to be fixed. the detailed explanation of the front fender goods which made the hole by themselves and fixed the hose clamp -- exchange
there is no specification removing a wheel It was thought that it was unkind. Even if it also asks a manufacturer Such explanation is unnecessary. Come out of a word. Very unkind correspondence it was disappointed ... Is it the consciousness of the parts supplier for races???
View detail
Good build quality.
It is made by Magical racing, and the texture is excellent.
The delivery time was also much faster than expected when I ordered.
The front tire must be removed to remove the OEM and install this product, so the front stand is required.
The installation itself is easy, but the hurdle may be a bit high there.
Removing and installing the front tire and caliper is a safety issue, so I also need to manage the torque … I need a torque wrench … I had the tools, and a friend who is an experienced mechanic helped me put them on.
I was missing two Mounting Bolts, so I contacted the Manufacturer and they sent them right away.
View detail
Overall, beautiful construction and accuracy.
The quality and accuracy of the product is excellent.
Just a hole in the Bolt
View detail
MagicalFender Installation
The mounting holes didn't fit, so I had to cut them with File.
No matter how I put it on, the gap between Tire and Fender is too wide, so Parenthesis is bad.
View detail
motoGP Look Front Fender
Installed on a GSX-R1000R 2019.
It's a product that has a functional feature that can protect the Inner Tube of Front fork, but I bought it almost for the purpose of appearance in order to approach the shape of motoGP style.
So I'm generally happy with how it looks, it's just like the picture! (Lol)
Photo
The shape of the front fork is good like motoGP.
You can dress your GSX-RR with your favorite Decal with reference to GSX-RR.
Because the clearance with the front fork is quite aggressive when actually installing it, is it the point of the famous place Manufacturer that it is established in this clearance?
The surface finish is not dirty by any means, but it is slightly yuzu-skin-like, and for the high price, it was ”not that bad”Level.
Before the work, I thought it was just a fender replacement, but in the case of GSX-R1000R, there is a part where the fender is fixed from inside, so the fender cannot be replaced without removing the wheel.
If there is no way to float the front wheel, such as STAND on the front, you will inevitably have to ask the shop to do the work.
You can also use the attached small Aluminum Bracket for installation.
You can't see it once it's installed, so it's not a problem, but you need to be careful about the mounting angle of the Fender because this Bracket doesn't have any positioning.
The screw is cut directly on this bracket, but the thickness of the board is thin and the screw is shallow, so I think it is better to use a medium strength screw lock.
It is the protection function of Inner Tube of this product, but it seems to be effective to some extent from the dirt condition.
However, if you look at the product photos, you can see that the stepping stones from the outside are guarded, but the inside (Wheel side) is no Guard, so it's not perfect.
However, OEMs are better than that because they are no Guard, inside or out.
Also, because the Inner Tube is covered, maintenance such as wiping and checking for oil seepage is rather reduced.
(Personally.) In layman's terms, it was introduced for appearance purposes, so its purpose was fulfilled when it was attached.
However, when installing on the GSX-R1000R, please note that the hurdle is higher than the standard Fender replacement due to the circumstances on the motorcycle side.
View detail
I need better packaging.
[How is it used?
Dress-upCustom
Was the one you received as per Image?
Yes
Was the installation difficult?
It's Bolt On, so even beginners can do it.
How was your experience with it?
Satisfied as a Dress-up
[Included Parts:were they on?
Instruction Manual and parts were included properly.
[Was there anything that disappointed you?
The product was cracked or chipped.
As soon as I received the product, I checked it and found cracks and chips in the product.
I'm not certain if they packed the item broken or if it was broken during delivery, but I would like to see them pack it a little better.
I thought about returning it, but gave up because it seemed like a long time to return it and a long time to get a new one.
The product only said it would fit up to a 16 year model, but I was able to install it on a 20 year model I own.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX)
magical Racing Carbon
It used to be A-TECH Carbon fender, but I got tired of it, so I changed to magical RacingCarbon.
I think this one has a better design.
Could A-Tech possibly be on the 10r? I just thought of that when I wrote that.
View detail
No question, it's cool?
It was on a SEA BASS 250sb that I bought used with 18,000? miles on it.
It was Refreshing and Stylish with a Large difference from NORMAL's flat and unrefined Fender.
Definitely good looking?
The best part about buying a used car is that you can pass on the love of the previous owner!
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA VFR800
Surprised to see which way you want to go …
After four months of waiting, it finally arrived.
But when you start installing it, the hole to knock the Screw down is in a completely different place.
View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA MT03, YAMAHA YZF-R3
I don't know.
I've been waiting for 4 months, I've emailed them twice and they've stonewalled me. Of course I asked them to pay for the second one on delivery. View detail
Makeover
It will certainly be lighter compared to OEM. I can not tell you the difference, but I definitely upgraded the lightness for seeing. Installation was installed with OEM Bolt. Instruction Manual is a car body with ABS? I just used Nut. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX)
Styling ◎ It is close to accuracy △ ○ Wonder
Although there was a little installation position Gap, it was an allowable range because it was diverted outside the application. Just like the photo from the beginning "Crack" There was a bit, so I tried to evaluate a little Minus. Styling is cool for drift! Others Carbon parts for z 800 are definitely on sale! View detail
I will not recommend it
Mounting holes are misaligned (It is not Level to scrap hole) I have to re-open the hole and I am currently asking for acquaintance to re-open
I am convinced if it is cheap but I think that the quality of Magical racing's goods has declined because it is a product waiting for delivery without inventory
There was no problem with no hole from the beginning
I think that there is nothing to buy anymore
View detail
Race ish looks GOOD!
Used in 2000 model ZX9R. Because Wound was in NORMALFFender I thought it was important matter : Change to Carbon. As expected there are only Carbon and it is very light but I can not feel anything honest if I can feel it riding and doing something. But Dress-up effect is outstanding! Carbon is Cool! Fitting is also good! If you are cheaper a little more - - - View detail
Front condition
Exchange from NORMAL,
As Upper Cowl made Carbon, it was replaced,
I am satisfied because the appearance has improved considerably!
Since I have never seen Motorcycle attaching the same Parts,
I think I've finished my favorite Motorcycle.
View detail
It is thought that the Clearance with a feeling of a Fit with a Front fork or a Tire is very good. Structure of the Stay made from a Carbon which connects however a Fender, and a Fork feels it not quite satisfactory. (-- which was cut and stuck)
It is thought that the Clearance with a feeling of a Fit with a Front fork or a Tire is very good.
Structure of the Stay made from a Carbon which connects
however a Fender, and a Fork feels it not quite satisfactory.
(-- which was cut and stuck)
View detail