Model Name:STEED600

Manufacturer:HONDA

Model Year:1988

It was a cruiser model that had an elaborated frame design and a swing arm structure. Its engine was wrapped around with a triangular silhouette frame. The suspension was stored under the seat to make the rear have a rigid style.

Specifications:

[Basic spec]

Manufacturer	HONDA	Engine Type	Water-Cooled 4 Cycle OHC 3-Valve V-Shaped 2 Cylinder
Model Name	STEED600	Starter	–
Grade	–	Maximum Output (ps)	30ps(22kw)/7500rpm
Drive Train	–	Maximum Torque (kgf/m)	3.3kg-m(32.4N-m)/5500rpm
Model Type	PC21	Curb Weight	208
Displacement	583	Dry Weight	205(Approximate Value)
Sales Launch Year	1988/0	Fuel Efficiency by Catalog	–
Height/Width/Length	1130/-/2310	Fuel Tank Capacity	–
Seat Height	–	Distance to Empty	–
Front Tire Indication	100/90-19 57S	Fuel Supply	Carburetor
Rear Tire Indication	170/80-15 77S WT

[Service data]

Standard Plug	DPR7EA-9	Chain Size	525
Number of Used Plugs	4	Chain Link Number	120
Engine Oil Amount	–	Battery Code	–
Engine Oil (Refill)	2.1L	Headlight	12V 60w/55w
Engine Oil (Element Replacement)	2.25L	Headlight Type	H4
Front Blinker Rating	12V 23w/8w	Headlight Remarks	–
Drive Sprocket Teeth Number	16	Tail Light Rating	12V 23w/8w
Driven Sprocket Teeth Number	45	Rear Blinker Rating	12V 23w

[Machine detail]

Motor Model Code	PD06E	Caster Angle	–
Bore (mm)	–	Trail (mm)	–
Storke (mm)	–	Minimum Ground Clearance	–
Compression Ratio	–	Distance Between Axes	–
Ignition Method	–	Streering Angle (Right)	–
Engine Lubrication Type	–	Turning Angle (Left)	–
Frame Type	–	Mirror Screw Hole Diameter	10mm
Minimum Rotaion Radius	–	Fuel Tank Reserve Capacity	–

[Underbody detail]

Front Brake Type	Single Disc	Suspension Type (Rear)	–
Front Brake Remarks	–	Number of Rear Shock Absorbers	–
Rear Brake Type	Drum	Rear Suspension Stroke	–
Rear Brake Remarks	–	Rear Wheel Travel	–
Suspension Type (Front)	–	ABS	–
Front Fork Type	–	Drive Train	Chain
Front Suspension Stroke	–	Differential Oil Amount	–
Front Fork Diameter	–	Chain Remarks	–

[Equipment]

Seat Lowering Allowance	–	Theft Prevention Device	–
Mirror Screw Hole Diameter	10mm	Tail Light Bulb Type	S25
Mirror Remarks	–	Tail Light Base Shape	BAY15D
Electronic Device Remarks	–	Tail Light Base Shape 2	–
Fuel Gauge	–	Tail Light Remarks	–
Clock	–	Front Blinker Bulb Type	S25
Hazard	–	Front Blinker Base Shape	BAY15D/BA15S

[Engine detail]

Clutch Type	–	Tappet Clearance (mm) EX	–
Transmission	–	Idling Initial Value (rpm)	–
Number of Gears	–	Needle Steps (Clip Location)	–
Gear Ratio	–	Float Level (mm)	–
Primary Reduction Ratio	–	Air Screw Return	–
Secondary Reduction Ratio	2.813	Main Jet Type	KEIHIN Round Large (E)
Variable Speed Vehicle Gear Ratio	–	Main Jet Number	#95
Tappet Clearance (mm) IN	–

[Other spec]

Clutch Cable Length	1030	Rear Brake Cable Length	–
Choke Cable Length	–	Other Cables	Direct (L)1020
Meter Cable Length	1000	Engine Number (Production Launch)	–
Throttle Cable Length	880/880	Engine Number (Production End)	–
Front Brake Cable Length	Direct (L)1020

[See Moto Index of HONDA]
[See Accessories for HONDA STEED600]