- Home
- Product reviews
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Suspensions
- Fork Boots / Fork Covers
- Final action and finally a fatality... (KIJIMA: Front Fork Boots])
【KIJIMA】Front Fork Boots] Review
Fits: HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON DYNA Family
Final action and finally a fatality
We had a lot of trouble, but I'm happy to report that we were able to verify the effectiveness of the test in six months
For the symptoms of cracking packaged goods, please use the special adhesive for Rubber (Slightly more expensive, Blackish Material's Rubbery Glue) In addition to this adhesive, TubePuncture repair patch adhesive is also effective I think (Be careful not to adhere to the inner tube when installing the adhesive.)
Still, in my case, every time I Pitching, it opens up a little bit, even after it's fully glued, so Finally, BlackCoating's wire was used to prevent the valley of the bellows from cracking Fixed
No cracks have occurred after the glue + wire fixing treatment
BlackWire is also easy to find at home center or, if you look for it well, at the hundred-yen store
the hang is not too tight, not too loose, but not too loose so that it contracts to Smooth when the Boots is in operation Fixed
Tie Wrap fixation is also possible, but the vent holes in the Boots will allow the Tie If the wrapping is blocked up, it can cause a rupture, and the mountain part of the bellows can break off There is
The wire is thin, so it doesn't block the vent hole, and it also keeps the airflow in place and can be fixed with Recommendation
Now it's no longer a concern and the Wire has solved the problem without being noticeable
The boots themselves seem to have quite a bit of durability, and I think they can go on like this for the time being, Front If you don't want to remove the fork, you can use this Boots, but if you can work with it, you can also use this Boots, if you can remove it OEM or OEM Shape equivalent is appropriate
Tindakan terakhir dan akhirnya kematian
Kami mengalami banyak masalah, tetapi dengan senang hati saya melaporkan bahwa kami dapat memverifikasi keefektifan tes dalam enam bulan
Untuk gejala pecahnya barang kemasan mohon menggunakan perekat khusus untuk Karet (Sedikit lebih mahal, Lem Karet Bahan Kehitaman) Selain perekat ini, perekat patch perbaikan TubePuncture juga efektif menurut saya (Hati-hati jangan menempel pada ban dalam saat memasang perekat.)
Namun, dalam kasus saya, setiap kali saya Pitching, itu terbuka sedikit, bahkan setelah direkatkan sepenuhnya, jadi Akhirnya, kawat BlackCoating digunakan untuk mencegah lembah bellow retak Tetap
Tidak ada retakan yang terjadi setelah perawatan pemasangan lem + kawat
BlackWire juga mudah ditemukan di pusat rumah atau, jika Anda mencarinya dengan baik, di toko seratus yen
gantungnya tidak terlalu kencang, tidak terlalu kendor, tapi tidak terlalu kendor sehingga berkontraksi menjadi Halus saat Boots di operasikan Fixed
Fiksasi Tie Wrap juga dimungkinkan, tetapi lubang ventilasi di Boots akan memungkinkan Tie Jika pembungkus tersumbat, dapat menyebabkan pecah, dan bagian gunung dari bellow dapat putus Ada
Kawatnya tipis, sehingga tidak menghalangi lubang ventilasi, dan juga menjaga aliran udara tetap pada tempatnya dan dapat diperbaiki dengan Rekomendasi
Sekarang tidak lagi menjadi masalah dan Wire telah memecahkan masalah tanpa terlihat
Sepatu bot itu sendiri tampaknya memiliki sedikit daya tahan, dan saya pikir mereka dapat terus seperti ini untuk sementara waktu, Depan Jika Anda tidak ingin melepas garpu, Anda dapat menggunakan Sepatu Bot ini, tetapi jika Anda dapat bekerja dengan itu, Anda juga dapat menggunakan Boots ini, jika Anda dapat menghapusnya OEM atau OEM Shape yang setara sesuai