- Home
- Product reviews
- Motorcycle Parts
- Engine Parts
- Intake Parts
- Insulator/Manifold
- Difference between K507-602 and 604... (KIJIMA: Rubber insulator)
【KIJIMA】Rubber insulator Review
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50
Difference between K507-602 and 604
48mm is already a Quantity:I've bought about 5pcs. and have no complaints at all, so I have high expectations for this one too.
With Mukawa and Minimoto, the Crack cracked and ended up not lasting a month, but with KIJIMA, several years are assured.
The most important thing to remember when assembling the Bolt is not to overtighten the Bolt.
The 48mm 1pc. was over-tightened, distorting and ruining the reinforcement plate inside.
By the way, besides this K507-602, there is another one called 604, but no one has mentioned what exactly is the difference.
The difference is the shape and position of the mountain that fits into the anti-dislodgement groove on the carburetor side.
This 602 is made to fit KEIHIN grooves as it says it is PE28 compatible.
When viewed from the carburetor slot, the mountain is slightly triangular in shape and deeply attached.
PWK28 is the same, and a small CR or FCR carburetor body can also be attached if it fits.
And 604, but it is VM/TV26 compatible and the mountain is round and attached in a shallow position.
TMR28 also seems to fit.
I see that the Rib dimension in Mikuni's Spigot ring dimension chart is different between KEIHIN and Mikuni.
There is such a difference, so make sure you buy the right one.
Especially note the carburetor that can be replaced by a Spigot.
Well, I think KIJIMA is a bit unkind… The dimension chart looks the same for both with a 35mm mounting diameter.
AlreadyQuantity:1pc. if you have a picture.
By the way, Hi-Chi Trading had a picture.
Good luck with WeBig.
Perbedaan antara K507-602 dan 604
48mm sudah menjadi Kuantitas: Saya telah membeli sekitar 5 buah. dan tidak memiliki keluhan sama sekali, jadi saya juga memiliki ekspektasi yang tinggi untuk yang satu ini.
Dengan Mukawa dan Minimoto, Crack retak dan tidak bertahan sebulan, tetapi dengan KIJIMA, beberapa tahun terjamin.
Hal terpenting yang harus diingat saat merakit Baut adalah jangan terlalu mengencangkan Baut.
48mm 1 buah. terlalu kencang, mendistorsi dan merusak pelat penguat di dalamnya.
Ngomong-ngomong, selain K507-602 ini, ada satu lagi namanya 604, tapi belum ada yang menyebutkan apa sebenarnya perbedaannya.
Bedanya bentuk dan posisi gunungan yang pas dengan alur anti copot di sisi karburator.
602 ini dibuat agar sesuai dengan alur KEIHIN karena dikatakan kompatibel dengan PE28.
Jika dilihat dari slot karburator, gunungnya berbentuk agak segitiga dan melekat dalam.
PWK28 juga sama, dan bodi karburator CR atau FCR kecil juga bisa dipasang jika pas.
Dan 604, tetapi kompatibel dengan VM/TV26 dan gunungnya bulat dan terpasang pada posisi yang dangkal.
TMR28 juga sepertinya pas.
Saya melihat bahwa dimensi Rib pada grafik dimensi Mikuni's Spigot ring berbeda antara KEIHIN dan Mikuni.
Ada perbedaan seperti itu, jadi pastikan Anda membeli yang benar.
Terutama perhatikan karburator yang bisa diganti dengan Spigot.
Yah, menurut saya KIJIMA agak tidak ramah… Bagan dimensi terlihat sama untuk keduanya dengan diameter pemasangan 35mm.
SudahKuantitas: 1 pc. jika Anda memiliki gambar.
Ngomong-ngomong, Hi-Chi Trading punya gambarannya.
Semoga sukses dengan WeBig.