Reviews
inconspicuous
I was a bit surprised at the price for such a bracket, but considering the time and effort required to find a substitute and the fit, it may be inexpensive.
The method of installation is up to you.
View detail
Reliable Engine Guard
I bought this because I was worried that the side pipe on my NC750X alone would interfere with the side pipe when it tipped over. I was told that it would interfere with the side pipe and that it was Large sturdy, but it did interfere with the side pipe. I had to cut it with a sander and paint the cut surface matte, but I was satisfied with the finished product.
Sparks and noise are great when cutting, so be careful if you try it.
View detail
Easy dress-up
[How is it used?
I wanted to change the look of the SUPER CUB110 (JA59) a bit, and also to have an anti-agitation effect.
Was the one you received as per Image?
Nothing of particular concern.
Was the installation difficult?
You will need a #3 Driver and a 10mm Wrench, nothing too difficult as you just need to remove the License Plate and install them together.
How was your experience with it?
It looks a bit Wilde. I'm not sure how effective it is in preventing agitation (partly because I didn't get something so blatant to begin with). Well, it makes it look more like an Off-road Motorcycle, which is better than nothing.
[Included Parts:were they on?
Nothing in particular, just Body.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Since the material is Rubber, I don't think I need to worry about it, but I thought it might hit the Fender that comes with the Motorcycle from the beginning, so I put Urethane Seat on it (2nd photo).
View detail
Fits: HARLEY-DAVIDSON FXLRS SOFTAIL LOW RIDER S, HARLEY-DAVIDSON FXLRST SOFTAIL LOW RIDER ST, HARLEY-DAVIDSON FXRST SOFTAIL LOW RIDER EL DIABLO
Pull back easily
It is just right to be able to pull back easily without changing wiring.
If this isn't enough, you could replace the Riser and raise it.
It's cheap and helpful.
View detail
Fits: INDIAN MOTORCYCLE SCOUT SIXTY, INDIAN MOTORCYCLE SCOUT
dirty
I thought it was Garbage, which is too dirty both in Package and inside.
It was a pain in the ass to return it, so I polished it myself for about an hour.
To the extent that it can be put on, I made it Beauty.
If it's this dirty, I'd rather buy it used and cheap.
View detail
It didn't fit.
I bought it because WeBig says it fits New Model from 2023,
Could not install.
I checked KIJIMA's Homepage and it was 2023 - not compliant,
View detail
Fits: HONDA DAX125, HONDA MONKEY125
Room for improvement
This set comes with a connector to avoid cutting cables. Unfortunately my 2023 monkey did not have the connector in the pictures nor anything remotely resembling the connector layout. Had to cut cables, sadly. I managed to slightly round one of the handblebar bracket bolts from the set while tightening.. with a small ratchet. The bracket itself and the USB connector are nicely made. Back light is green. The cap seals nicely and gives confidence in water resistence. Manual is japanese. View detail
KIJIMA Assist Carrier
The assist carrier feels like its a "stock" option of the z650rs, fits the bike perfectly. The paint on the metal is very similar to the frame of the motorcycle, though the welding can be improved, i notice some rough portions on the welded parts. Installing is easy and the diagram is clear.And to those who are wondering if the passenger will feel the metal on the side of the carrier, its not going to impede the sitting position of the passenger and can be used as grab rails, all in all, a good product. View detail
Fits: KAWASAKI Ninja ZX-25R KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R
Great for cold winters!
I use Heater because it's cold in the morning.
Adjustable and comfortable.
View detail
Helmet lock
Installation is easy
Even at touring destinations, it was inconvenient to remove the Seat and put on the Helmet NORMALSpec. so it became convenient.
View detail
Fits: KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R
Good vibes
I thought it would be more rugged.
It's not so bad.
View detail
KIJIMA
Was the one you received as per Image?
Yes
Was the installation difficult?
Really easy!
How was your experience with it?
Great!
[Was there anything that disappointed you?
There wasn't one.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
KIJIMA
Grip is the one! This is the one to choose! View detail
Fits: HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON DYNA Family
Used for GSX250E
I bought it knowing that it does not fit. The inner diameter is 39Φ and the inner diameter of my car is 33Φ so naturally it is loose, but since it does not fit the outer diameter due to the Stubby installation, I dared to fix it loosely so that it can move freely up and down. The Inner is short and not traveled a lot, so it works well as a protector to protect from stepping stones on the Dirt. View detail
Not good
It might be a little hard to see and I don't like it. View detail
Very warm.
Installed on SEROW250.
I chose 115mm because I have a ZETA hand guard on it. I think it is slightly short, but 120mm would interfere with the hand guard.
The key heating temperature is quite warm. If anything, it's hot.
In addition to thin Winter Gloves, some have hand guards, but the basic level is Level 1, and even at outside temperatures of 0 degrees Celsius, about Level 3 will be enough.
To be honest, it sometimes feels hot, so it could be a bit weaker.
Grip is slightly thicker, but Level you will soon get used to.
The rubber part is thinner, so the cushioning is less. However, my hands did not become numb after a full day of touring down the road.
The controls on the Switch are neither easy nor impossible.
The integrated type is too close to the thumb and may be misoperated, so it is a win-win situation.
The ideal might be one that can be co-locked with Mirror and Bracket.
Summary
It is very comfortable to use quickly in the morning and evening or in the mountains, even outside of winter touring.
I'm glad I bought it because I don't mind the controls.
However, the position of the WiringCoupler was delicate and too close to the Grip, making it troublesome to maneuver.
In SEROW, the coupler comes between the Accessory Case and the Stem, so it would be helpful if it were a little closer to the terminal.
View detail
Fits: HONDA APE 100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 50
VINO125
[How is it used?
Town ride
Was the installation difficult?
It was totally easy.
How was your experience with it?
Good quality
View detail
Lightweight bar ends from KIJIMA
Lightweight bar ends from KIJIMA, ideal to save some weight while still maintaining some vibration damping efects. Can be use on both the stock steel handlebars or aftermarket aluminium ones, as it cames with both adapters type and the Allen tool also. Overall a good quality/price product. View detail
Even though it's only for car models ….
I purchased it specifically for my car model, but could not install it without modifications. View detail
It became a little Fashion.
The purpose of the parts is to make the Indicator Lamp easier to see. Of course it has that effect, but I think there is a little change in aerodynamics.
I feel strong wind pressure when I reach about 100 km/h at high speed. After installing this Visor, I felt it was reduced a little.
I recommend it to anyone who wants to do a little something better.
View detail