Reviews
Brembo radial master
SEA BASSRGV250Γ (VJ22A) It is used for
We found a Fluid leak from the OEM Master Cylinder due to deterioration, and were torn between Overhaul, a new NISSIN, or a YamahaOEMbrembo, Get me the best one you can." This is why we chose this product.
The OEMCaliper piston diameter is an opposed 4-pod 30/34mm double disk, but Radial master recommended 17mm or 19mm, but I prefer a firmer touch, so I finally chose 19mm.
The original hose was a Swage line mesh hose, and the handling was different from the OEM hose, so the hose was simply attached with the supplied banjo bolt.
The tank bracket, tank, and hose were purchased separately, and the brake switch was installed using the Emon Flat Terminal instead of the Bullet Type Terminal, which came with the brembo wiring, because we did not want to change the OEM wiring. The brake switch was installed using Emon's Flat Terminal instead of the Bullet Type Terminal.
I was worried about interference with the cowl when installing the tank, but there was no problem, although the clearance was about 5mm when the handlebar was fully cut.
Air venting is very easy because of the Bleeder Bolt on the MASTER side.
As for the key performance, even my insensitive self could feel that BrakeTouch was improved over OEM.
I am not sure if this level of specifications is necessary for touring on public roads. (Lol)
However, my impression is that it is a little harder than I expected.
It's not a Level that has problems of course, and even at 19mm, it's definitely significantly better than the OEM Master Cylinder. (OEMTokico) And I think there is also the issue of compatibility with
I have not tried it, so I can only imagine, but I think 17mm would be fine.
The lever is also infinitely adjustable, so you can grip it from your best position.
Finally, as for the appearance, it is very beautiful, but it is too beautiful for old cars and floats a bit. (Lol)
It was a bit expensive, but I felt the price was well worth it.
View detail
Custom choices are difficult.
Selected for hydraulic clutch
Brembo, no problem.
But the choice of parts is a tough one, as I've been able to get as much working area as I could with the OEM wires.
I am Clutch Quantity:I drive a two-pc car, so I wanted a little more adjustability.
I've since put it on, but I think 17 pies would have been fine. sweat
I'm thinking of changing to a short lever, which would give me a little more grip, so I'll just change the lever.
Under consideration.
View detail
For ZX-14R High-grade brembo M50
If there is a fit from Endless, this is the one to choose.
CircuitUser has also been very well received.
bremboM50for Caliper
View detail
Fits: DUCATI DESERTX, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 1100EVO, DUCATI DIAVEL 1260S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950 RVE, DUCATI HYPERSTRADA 821, DUCATI HYPERSTRADA 939, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI MONSTER 695, DUCATI MONSTER 1000, DUCATI MONSTER 696, DUCATI MONSTER 750
Attachment
As expected. Thank you very much. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail
It's probably for the best.
Everything is in balance.
There is no uncertainty whatsoever.
View detail
Fits: DUCATI DESERTX, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 1100EVO, DUCATI DIAVEL 1260S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950 RVE, DUCATI HYPERSTRADA 821, DUCATI HYPERSTRADA 939, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI MONSTER 695, DUCATI MONSTER 1000, DUCATI MONSTER 696, DUCATI MONSTER 750
It's nice and casual.
It's nice and casual, the texture is okay. View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX250R, SUZUKI DL1000 V-STROM650, Others , DUCATI 1098, DUCATI 1198, DUCATI 748, DUCATI 749, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 999, DUCATI DIAVEL, DUCATI GT1000, DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER S2R, DUCATI MONSTER S4R
good buy
The size fits perfectly and it's a good product. View detail
Fits: DUCATI Multistrada 1200, DUCATI STREETFIGHTER, DUCATI 1098, DUCATI 1198, DUCATI 1199Panigale, DUCATI 1299Panigale, DUCATI DIAVEL, DUCATI Monster 1200, DUCATI Monster 1200R, DUCATI Multistrada 1260, DUCATI PANIGALE V4
Cannot be installed even though the car model is compatible.
The product cannot be installed even though it is compatible with the car model, and it just won't fit.
AELLA's other products also have high product prices but poor accuracy.
Future purchases are a consideration.
View detail
Genuine Brembo 19RCS Corsa Corta fitted to YZF-R1
The YZF-R1 came in wanting to be transitioned onto a track related bike so I went to work on the braking system. One of the first things I wanted to change was the annoying stock master cylinder. Obviously, Brembo was the way to go. I decided on this one as it fitted with the specs of the bike in mind. Finding the correct master cylinder was not hard but there were a few choices but I went for this one, the 19RCS Corsa Corta in the end. It had all the requirements I needed so it went in my basket. I had a few other parts and the shipping was reasonable for what I had. EMS got my order to me in 5 days. The master cylinder came with the standard stock lever length which was perfect for my needs. It is the 18 x 20 one so works good with the floating calipers on the bike anyway. It came in the Brembo box and also came with a few copper washers. I had already sourced the HEL line that would make this all work. The master cylinder is a real piece of kit and fitted really well with the bike and the instrument cluster I was leaving in situ. Not a hard job once you have all the parts together. This master cylinder is awesome and so much better than the stock one. Oh and by the way, looks the nuts. There are just so many adjustments that you can definitely find the right setting for your liking. Thanks Webike for the great service you provide. View detail
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Caliper seems to drag less ….
There will be a slight impact on the push/pull of vehicles.
I feel that the Chassisisis sound when pushing the vehicle has become a little quieter and the resistance I was feeling has become lighter.
I thought the product was satisfactory to the extent that I felt it was.
View detail
I use it all the time.
I feel safe and always use them. View detail
Fits: DUCATI DESERTX, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 1100EVO, DUCATI DIAVEL 1260S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950 RVE, DUCATI HYPERSTRADA 821, DUCATI HYPERSTRADA 939, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI MONSTER 695, DUCATI MONSTER 1000, DUCATI MONSTER 696, DUCATI MONSTER 750
Custom in Red color Bartz
Black color body in Custom with Red color verts.
The number of small red-colored sections has increased again.
I was satisfied with the solid construction of the bars, the device was easy to use, and inexpensive as well.
Naturally, there is no change in driving.
View detail
Fits: DUCATI SUPERSPORT 939, DUCATI DIAVEL V4, DUCATI STREETFIGHTER V2, DUCATI XDIAVEL S, DUCATI SUPERSPORT 950, DUCATI MONSTER 1200 S, DUCATI MONSTER 1200, DUCATI XDIAVEL, DUCATI DIAVEL 1260, DUCATI MONSTER 1200 R, DUCATI DIAVEL 1260 S, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI DIAVEL 1200, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1260 S, DUCATI MULTISTRADA 1260 PIKES PEAK, DUCATI MULTISTRADA 1200 S, DUCATI MULTISTRADA 1260, DUCATI MULTISTRADA 1200 DVT, DUCATI MULTISTRADA 1200 DVT S
Custom in Red color Bartz
Custom in Black with Red color inserts on Black body.
The construction of the barts is precise, rigid, and unsatisfactory.
We did not get any change as far as driving, but we are happy with the look.
The replacement requires a variety of tools and effort, but the look is much tighter.
View detail
Fits: APRILIA DORSODURO 900, APRILIA RS 125 GP REPLICA, APRILIA RS125, APRILIA RSV4, APRILIA RSV4 FACTORY, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA SHIVER 750, APRILIA TUONO 125, APRILIA TUONO V4 1100 FACTORY, APRILIA TUONO V4 1100 RR, APRILIA TUONO V4R, BENELLI LEONCINO 800, BENELLI LEONCINO 800 TRAIL, DUCATI 1098, DUCATI 1198, DUCATI 1198S, DUCATI 1199 SUPERLEGGERA, DUCATI 749R, DUCATI 749S
Genuine Puig Hi-Tech Racing Grips
These grips were purchased for a customer who wanted a little more bling on their bike. The copper colour was the one they wanted. Searching Webike and found these fairly easily and at a better cost than I could source locally. With a few other small parts already in my basket, I got all shipped with my chosen courier which is of course EMS. They just get the orders delivered fast and I mean fast. Thsi all arrived in 5 days from being shipped which you cannot argue about. The grips themselves came in the standard Puig packet/box and were also covered in bubble wrap to keep them safe. The colour is more true to a copper than I would say orange but as it happened, this worked perfectly with the colour scheme of the bike anyway, win win. I personally have never tried this style of grips but once fitted, they do feel alright. I have to say though, the finish and quality of these are absolutely awesome. Really good CNC work on them and the grip part is super grippy so no issue with slippage. The customer is very pleased so thanks Webike, nice one. View detail
At first I was puzzled by the difference in Touch.
I was happy with the OEM Nisshin so far, but since the Caliper is brembo, I thought it would be better than what I have now. I bought it because I thought it would be better than what I have now.
I am not a fan of snaps and touches, so I was a bit confused at first, but I thought the Lever ratio 18 would be good for control. I would like to try various things with Winding when the road surface temperature rises a little more.
View detail
Fits: DUCATI MONSTER 900, DUCATI STREETFIGHTER V2, DUCATI MULTISTRADA 1200 DVT S, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1200 DVT ENDURO, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V2 S, DUCATI MULTISTRADA 1200 S, DUCATI MULTISTRADA 1200, DUCATI MULTISTRADA 950 S, DUCATI MULTISTRADA 950, DUCATI HYPERMOTARD 1100 EVO SP, DUCATI HYPERMOTARD 1100 EVO, DUCATI HYPERMOTARD 1100 S, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 939 SP, DUCATI HYPERMOTARD 821 SP, DUCATI XDIAVEL S
I received an item that did not look like the picture.
Note that you will receive a design that is completely different from the image!
Bolt came with only DBK written on it.
WeBig, manage your Page properly.
Too many items are in stock when there are no items in stock or anything like that, and too many other miscellaneous things!
View detail
Fits: DUCATI XDiavel, DUCATI SUPER BIKE 1299 Panigale, DUCATI DIAVEL, DUCATI StreetFighterV4, DUCATI SUPER BIKE PanigaleV2, DUCATI SUPER BIKE PanigaleV4R, DUCATI SUPER BIKE PanigaleV4, TRIUMPH Supersports Daytona 675, DUCATI SPORT TOURING ST2, DUCATI SPORT TOURING ST3, DUCATI SPORT TOURING ST4, DUCATI SUPER SPORT 900 SS, DUCATI SUPER SPORT 800, DUCATI SUPER SPORT 1000, DUCATI SCRAMBLER Sixty 2, DUCATI SCRAMBLER 800, DUCATI MULTISTRADA 1200, DUCATI SUPER BIKE 748, DUCATI SUPER BIKE 916, DUCATI SUPER BIKE 996
Unify Slider with AELLA
[How is it used?
Used for city driving and touring.
Was the one you received as per Image?
AELLA's Frame Slider, Front Axle Slider, and Rear Axle Slider had been installed in the past, and the design and texture are exactly the same, giving a sense of unity and high quality. (The design and texture are exactly the same, giving a sense of unity and luxury.)
Was the installation difficult?
Installation of this product is very easy as it can be done with a single hexagonal Spanner.
However, in my case, when removing the OEM Bar End, the tool was incompatible or rattled and licked the Screw hole.
If you are doing this as a DIY project, it is better to make sure that the OEM bar end can be removed without any problem. (The tool I used was Astro's Torx bit, and I managed to remove the OEMBar End because it was not tightened that hard.)
How was your experience with it?
The weight difference between the OEM Bar End and the OEM Bar End is not much, and I honestly thought the anti-vibration effect would be Brushbo. (I didn't feel that numb in the OEM condition to begin with.)
I feel that it is effective in terms of the appearance of the Slider system, which has become more unified.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
When an AELLA Bar End is attached to an OEMHandlebar or OEMGrip, there is a slight gap between the Grip and Bar End, and the Handlebar is visible. (This is the same with the OEMBar End, but the Bar End is now black, which makes the Silver Handlebar more visible.)
I thought that the Titaniumium washer that AELLA is selling is to hide this.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
Ultimate Streetbike Caliper
Billet monobloc Stylema calipers , the dust seal equipped beauties , ready to enhance your ultimate streetbike / track day / custom build . When Brembo announced the billet version Stylema , I was very interested in the fact these calipers bridge the technology gap between full race monobloc calipers and street use calipers , so I knew I had to own a set to try them out . The traditional cast Stylema is already the best factory fitted premium caliper , and rightly so , but these precision billet masterpieces deliver truly next level braking performance . I have fitted my set to 2023 H2 Ninja , and the big speed washes off with 1 finger control , highly recommended . View detail