Reviews
Generator Plug
I think this is a very good One Point for Crankcase. View detail
Customization of CRF250L in 2023
The 5th to 6th gears are quite far apart and there was some rattling, but after installing this PowerBox, I was able to smoothly SHIFT UP.
The OEM exhaust pipe is Black Matte, but this one is Polished Stainless Steel, shining and very parenthesis.
The installation process took about two hours of worrying.
Especially, the exhaust pipe joint of the engine was too thin, and I thought that I could not insert the bracket enough because I thought it would go all the way to the base of the bracket, but when I looked at another sp Tadao's site, there is about 8mm gap, so the metal gasket must have been squashed inside and it looks good. I thought it was not enough to insert.
The silencer part of the Exhaust System does not go in deep enough, so I felt it was necessary to apply liquid Gasket firmly and put it in little by little to get a Large cut.
View detail
Fits: HONDA PCXe: HEV, HONDA PCX, HONDA PCX150ABS, HONDA PCX160, HONDA PCX HYBRID, HONDA CRF250RALLY, HONDA CRF250RALLY S, HONDA CRF250M, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF250 RALLY LD, HONDA ADV150
Cospar good
I think it is more cost-effective to put on Red Pad than to put on Normal. View detail
Lightness and thickness are good
[How is it used?
For defensive power up from daily use to forest roads
Was the one you received as per Image?
It is thicker and lighter than I expected.
Was the installation difficult?
Material:One of the four screw holes was installed too forcibly.
Instruction manuals are fine in Illustration only with understandable expressions.
How was your experience with it?
I personally think that Coloring to Match the Red body.
The holes at the bottom are not Drain, so of course they don't fit.
[Included Parts:were they on?
No excesses or deficiencies. If possible, I would like two Stickers for both SIDES.
[Was there anything that disappointed you?
It is not a disappointment, but it may require more power for installation as the slight distortion may have a large effect due to the firm cover to the engine.
View detail
Was there a change in the shape of the Cover in response to the 23-year MODELorRecall?
The shape of the Right Side, in particular, does not fit the shape of the Right Side, but I cannot determine if this is a product error, a change from the 23-year model, or a change in response to a recall.
The gapping is within the range that can be handled by the order of screws to be installed, the procedure, and the power.
View detail
Buy before and after
Since I was planning to go touring in the near future, I inspected the car in advance and checked mainly the consumable parts.
After checking, I found that there were almost no Brake Pads in both front and back, so I hurried to purchase them.
It was in stock and arrived immediately and in time for Touring.
And because it is made by brembo, the brake also works well. I used to use Red Pad, but when I changed to brembo this time, I decided to use brembo from now on because it is inexpensive but has good performance.
This product is for the rear of CRF250.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA 400X, HONDA CBR250R, HONDA CBR400R, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF450L, HONDA CBR500R, HONDA MONKEY125, HONDA CB150R, HONDA CB300R, HONDA CB500X, HONDA ZOOMERX, HONDA DIO110, HONDA glom, HONDA CBR250RR, HONDA PCX125 JF28-1000001-1099999
Best Matches
It matches the color of the car body and looks like an OEM product. I am satisfied with the color match. I could install it without any modification, even though our Motorcycle is not listed in the list of applicable vehicle models. View detail
Fits: HONDA ADV150, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA PCX HYBRID, HONDA PCX150ABS, HONDA PCX160, HONDA PCX, HONDA PCXe:HEV
Buy before and after
Since I was planning to go touring in the near future, I inspected the car in advance and checked mainly the consumable parts.
After checking, I found that there were almost no Brake Pads in both front and back, so I hurried to purchase them.
It was in stock and arrived immediately and in time for Touring.
And because it is made by brembo, the brake also works well. I used to use Red Pad, but when I changed to brembo this time, I decided to use brembo from now on because it is inexpensive but has good performance.
This product is for the front of CRF250.
View detail
brembo is safe and secure
[How is it used?
The OEM pad for the CB125R was neither good nor bad, so we decided to go with this product to replace it with a better one.
How was your experience with it?
I feel that Brake's bosom has expanded.
I am satisfied because I can Control as much as I want it to work.
(Braking force changes with Tire, for referenceα-14Z)
[Was there anything that disappointed you?
The included Instruction Manual does not have a translation (please type here), so those who need it should be careful.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY
if a lucky number comes up
Replacement is a quick and easy process if you are used to it. After the replacement, I test drove the car and found that it worked just fine. However, the sound was quite loud at first, but after about 200km, the sound became less noticeable. As for the effect, the bite is stronger than DAYTONA's Red Pad and weaker than Golden. View detail
Winter Essentials
I had survived the winter with only the ZETA hand warmer, but as I got older, the coldness in my hands started to get to me, so I bought it. View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250M, HONDA CRF250L
Wiring No processing
I bought this for Grip heater, I didn't want to modify the Wiring, so I am Large satisfied. View detail
Fits: HONDA CRF250L, HONDA CRF250M
Liquizo Pawaa foot carbon heat guardPC-18326H
I bought it because it was for crf250l and it could not be installed on the current model md47. it seems to be compatible with md38,md44. Please be careful when you buy it. View detail
Zita Forged AluminumKick Stand
I installed it on my crf250lmd47 to make it look cool and solid. View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
ODAX Keiti Fuel Cap Pad
연료통 입구에 흠집이 나는걸 방지해 주려고 샀습니다.
푹신푹신한 재질이라 더 좋은거 같아요
스티커만 붙이면 되는거라 설치하기 간편합니다.
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's a soft material
It's easy to install because you just need to put on a sticker.
----------------------------------------------------------
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's soft and fluffy
You only need to attach a sticker, so it's easy to install.
I boughHt it to prevent scratches at the enterance of the fuel tank.
I Think It'S BECAUSE IT A SOFT MATERIAL
It's Easy to Install Because You Just need to put on a Sticker.
Powered by Google Translator
View detail
Mobile Holder
I am glad that the handlebar was in the wrong position when I put it on the handlebar, but it is where I want to put it. View detail
Fits: HONDA ADV150, HONDA CRF250 RALLY LD, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA PCX HYBRID, HONDA PCX150ABS, HONDA PCX160, HONDA PCX, HONDA PCXe:HEV
It is a Pad that works softly and is easy to plunge into.
It is an easy-to-handle Pad.
The decrease is surprisingly fast.
View detail
Does not break the Style of the car body
【good point】
Light
Looks sturdy.
Easy to install.
It is hard to be confused with others.
[Bad point]
The mounting holes were gapped and needed to be machined.
There is no hole for drain bolt.
Fallen leaves accumulate between the body of the vehicle and the Plate.
It could be done more cheaply.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Replaced at the same time as Brake pedal!
I had to replace the brake pedal with a ZETA pedal, so I replaced this one at the same time. View detail
FOR CB250F
I have ordered 1 clamps and installed to my bike. now it's loking new. item included in webike box.packaging is very safe. thanks webike team.highly reomended. im happy to deal with webike. View detail