Reviews
If it is a single cylinder, it is very effective Large!
Fuel economy will also increase.
Power also goes up.
Life gets better, too.
Is there anything cheaper and more effective Large?
The effect is particularly large for single cylinders.
Installation on CUB110.
View detail
I bought it as a Stock, but I replaced it as soon as possible and it works great!
I purchased it for Stock on April 6 and it was promptly replaced.
Even after replacing the battery, the cell was weak and rarely restarted from idle ring stop, so I checked the Fuse and found that the Fuse had not run out, so I checked the Plug and found that it was covered.
After the replacement, the cell runs well, and the car no longer has trouble restarting from idle ring stop.
It has about 13,000 km since I last replaced it with the same one, and I was hoping it would last a little longer, but the price is low, so it's a good thing.
View detail
I can last three years
In 3 years, the Black will fade and become White, and it will catch and become ragged.
It needs to be replaced periodically.
Exhaust Guard is included in the price.
View detail
Fits: SUZUKI Address50, SUZUKI AddressV110, SUZUKI Basket, SUZUKI LETS, YAMAHA VINO, YAMAHA JOG, HONDA dunk, HONDA glom, HONDA TACT, HONDA Giorno, HONDA DIO, KAWASAKI Z125PRO, KAWASAKI KSR-1, SUZUKI BIRDIE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI ADDRESS V50
Protective Cover
I am worried that it will melt in the Exhaust System, so I let it cool for a while before using it. Does anyone know if it will not melt or not? View detail
Fits: SUZUKI Address50, SUZUKI AddressV110, SUZUKI Basket, SUZUKI LETS, YAMAHA VINO, YAMAHA JOG, HONDA dunk, HONDA glom, HONDA TACT, HONDA Giorno, HONDA DIO, KAWASAKI Z125PRO, KAWASAKI KSR-1, SUZUKI BIRDIE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI ADDRESS V50
just plain unsatisfactory
This time, due to various circumstances, we gave up our liter SS and purchased a new GROM after a Hara 2Scooter.
It is my first new car in about 16 years, and although it has a roof, I have to park it in a place where it is almost exposed to the rain, so I decided to buy a Cover first and foremost!
When I put the cover on, it doesn't fit well. I think the height of the Mirror and parking with the Handlebar turned off are not taken into consideration.
Even with very careful Cover, the slightest breeze would roll it up to the Front Fender (I reapplied it this morning, but it was rolled up before noon).
It also has a Belt at the bottom to prevent flapping, but the Belt was not threaded through the Male side of the Buckle.
We are in the process of applying for a conformity warranty, but will replace it even if the application is not approved.
If your application is not approved, you are throwing away Gold. I definitely do not recommend it.
View detail
A little short, a little thick
I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people.
View detail
Fits: HONDA Livedio ZX AF35, HONDA Livdio <Compatible model number> AF35-1000000-2199999 <Compatible model> SK50M(M), HONDA Livdio J <Compatible model number> AF35-1000000-2199999 <Compatible model> SK50M(V), HONDA Livdio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(M), HONDA Livedio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(V), HONDA Livedio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(T), HONDA Livedio <Compatible model number> AF34-1000000-3299999 <Compatible model> SK50M(S), HONDA LIVEDIO CHESTER <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(T), HONDA LIVEDIO CHESTER <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(S), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(Y), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(M), HONDA LIVEDIO CHESTER <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(R), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(V), HONDA Livdio ST AF35 <Compatible car body number> AF34-1000000-3299999 <Compatible model> SK50M(M), HONDA Livdio ST AF35 <Compatible VIN> AF34-1000000-3299999 <Compatible model> SK50M(V), HONDA Livdio ST AF35 <Compatible VIN> AF34-1000000-3299999 <Compatible model> SK50M(Y), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(T), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(R), HONDA LIVEDIO CHESTER <Compatible car body number> AF35-1000000-2199999 <Compatible model> SK50M(S), HONDA Livdio ST AF35 <Compatible VIN> AF35-1000000-2199999 <Compatible model> SK50M(Y)
A little expensive, but this is good.
Clutch springs are very easy to replace.
You can also adjust the tension with the Adjustment Screw, "A little more" You can also adjust the
It's a little expensive, but it's useful.
View detail
Fits: HONDA Giorno2, HONDA Byte, HONDA CREA SCOOPY, HONDA GIORNO CREA, HONDA SMART DIO-DX, HONDA SMART DIO
Boss does not fit in Pulley.
The clarity of the bushings on the pulley was not quite right and the OEM bosses would not fit. Is there a difference in the product, or is it an individual difference in the Both Sides of the car? (・・;)
I managed to insert and install the bushing after grinding it with PaperFile, but it is not as smooth as the OEMPulleyOEM boss combination, so it is a bit of a bummer.
View detail
KITACOGasket
I used it to replace the exhaust system on my ADV150 and it worked fine with no exhaust leaks.
There are no particular difficulties in installation.
View detail
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA Giorno, HONDA Today, HONDA PCX160, HONDA PCX150, HONDA PCX, HONDA Dunk, HONDA Dio110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA LEAD125, HONDA ADV150, HONDA ADV160
Fits well with 2018 Crosscub.
I purchased this because the thread of the original drain bolt was blunt.
Although it is not visible, it looks cleaner and more durable than a genuine drain bolt.
The O-ring has now traveled 20,000 km and is still in good condition.
Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. -------------------------------------------------- -------- I purchased this because the thread of the original drain bolt was blunt. Although it is not visible, it looks cleaner and more durable than a genuine drain bolt. The O-ring has now traveled 20,000 km and is still in good condition. Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. Powered by Google Translator
View detail
To replace Exhaust System
2Quantity:The set is reasonably priced, and KITACO offers peace of mind. View detail
1pc. is Smaller
The first one was a little smaller than the second one, so the Quantity:Set and it's falling down.
The other one was a good Just fit.
View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 50, HONDA DIO, HONDA LEAD, HONDA DAX, HONDA PCX, HONDA MONKEY, HONDA C110, HONDA GIORNO, HONDA DIO CHESTA, HONDA GORILLA, HONDA TODAY, HONDA CRF50F, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA SUPER CUB70
12209GB4682
I decided to carry out deep maintenance on my Honda Monkey, for which I needed oil-removable valve caps. I was very happy when I was able to find the original. There were no problems with the installation, externally the dimensions are the same as those installed from the factory, they differ only in color. There were no problems during installation. At the moment, everything is working without comments. View detail
![Incandescent Light Bulb [Head Bulb] T19 P15D25-1](https://img.webike-cdn.net/catalogue/10509/headlight_TS.jpg)
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
Anyway, it's bright.
The ADDRESS V100 has a reputation for having a dark headlight to begin with. (1994 model) attached to the
I am impressed that I can now see in front of me when driving at night, but in general, the light intensity is just normal.
Still, it is hard to believe that it is +6.5W, and you can feel the difference between just a light bulb and Halogen very clearly.
We do not yet know how durable it will be, and we do not know if the increased power consumption will affect the battery charge.
Well, even if the Battery goes up, you won't be able to leave because the KICK is on.
Its Risk is unknown, but I think it is worth changing it once for V100Owner who has problems with Headlight.
That's how bright it is! V100 is w
View detail
MR-A8S
My friend was worried about thread protection in the consoles of his SUPER CUB CUSTOM, I offered him these spacers. As expected, there are no complaints about the product, the installation went without problems, everyone was satisfied. If you are thinking about protecting the threads in the remote control and placing some additional equipment (windshield, phone fasteners or additional light), this is an excellent solution. View detail
Advantages of Maintenance
I have been using DX since its release. I don't mind maintenance, but sometimes I get tired of doing it when I'm busy with the weather, so it's nice to have less frequent replacements. Fuel consumption and running performance do not change drastically. View detail
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
Control voltage is too high.
After installation, I casually applied a tester to the battery and found that 16V was output!
I thought it was quirky and expensive, so I measured it and found that both Regulator and Battery
Idling (1600 rpm) The control was at 16V at 4000 rpm and 17.5V at 4000 rpm.
This is not usable!
Idling when I put it back in the OEM that I removed it from. (1600 rpm) The voltage was 14.5V at 4,000 rpm and 16V at 4,000 rpm.
Wasted... Worst of all...
View detail
I wasn't expecting it.
I bought this as a rear shock for my old Scooter.
The Machine is Honda's first LEAD80.
Thank you very much
View detail