Reviews
Maintenance.
I have not used it yet but the Bolt on the R1 has rusted so I bought it to replace it.
I would recommend everyone to replace it before this happens because it will make the Brake less effective. LOL!
View detail
Genuine Yamaha O-Ring Seals for FZ1 2008
These o-rings were also part of the water pump rebuild on the 2008 FZ1 which needed attention due to the age related parts not looking great. Finding the right O-Rings was sumple as I already had the Yamaha schematics for the water pump open. There are 2 of these same o-rings but have different item mnumbers although they are the same part number. With the other parts in my order for the rebuild, I had EMS ship them al toghter to save on shipping costs. The entire order arrived in perfect condition and well packaged in 5 days. Th o-rings were individually packaged in their own Yamaha pouch. They are flexible but also strong as they do need to be. Never any doubt when it comes to Genuine Yamaha parts. They are well within the specifications for the o-rings and time to continue the rebuild to get this bike back on the road. Thanks for the hard work you do Webike, much appreciated. View detail
For THRUXTONRS
OEM replacement for Triumph is not available, but if the OD and internal Screws match.
Can be installed. Always change Oil and Drain plug Magnet
This product gives me peace of mind when I look at it and worry about all the iron dust.
Overall length is slightly longer than tiger OEM, but no problem for installation.
View detail
Fits: YAMAHA , YAMAHA MT-25, YAMAHA FZ8, YAMAHA FZ1, YAMAHA MT-03
MT-09 (2023) Used for
Used to install high sider bar end mirror on MT-09 2023 MODEL
Note that on Webik, the MT-09 compatible Heavy Weight Bar End is the M16 one. (Bar End standard has changed since 2021MODEL)
There is a non-heavy weight Yamaha M6Universal Product, but the difference is not only whether or not it is heavy weight, but also whether or not the fixed position can be fine-tuned.
The heavy weight one is not adjustable horizontally, and the angle is also stuck when the Mirror Bolt is closed.
Non-heavy weight products are fixed in the quantity position.:Pair (for Left and Right) The angle can be moved by hand even after the Mirror Bolt is closed.
Quantity:Pair (for Left and Right) I prefer Heavy weight because I am a person who wants to align with Exactly in (I prefer the Heavy weight (the texture is also better).
Also, if you want to put Mirror down either way, you need to face the sharp side outward to do it.
View detail
It says it is TMAX560 techmax compliant, but it is completely useless.
I bought it because it was supposed to fit, but it did not match the Screw shape of the Handlebar End at all. I was very disappointed. View detail
A little short, a little thick
I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people.
View detail
PetitCustom
PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color!
View detail
Standard PetitCustom
For Caliper's color insert!
Trial installation before putting brembo in.
4mini standard color:??
View detail
Small
I bought it for my BMW R1150GS because it fits VST 1050, but it is smaller than I expected. I bought it knowing that it would not fit over the SIDEPannier, but I did not expect that it would not fit over the Top case either. The storage is compact. View detail
Genuine Yamaha Hose 5 for FZ1 2008
This was yet another part that is for the rebuild of the FZ1 2008 which was looking a bit tired with the almost 20 year old OEM parts. Although they were not particularly damaged, they made the bike look older than it is so new ones are essential. Finding the right hose was easy as I already had the Yamaha schematics for the previous pipes and hoses needed. The cost from Webike was great and far better than I could source locally. With the other parts I need for this rebuild in the same order, I saved a little on the shipping too which also helped. Via EMS my order was delivered in 5 days from shipping and was very well packaged and padded out so no damage was incurred. The hose 5 is a smaller diameter hose than the previous hose 1 I also purchased but it is also an inner braided hose as it needs to be robust and strong. The original bend fits perfectly with the pipes and along witht he clips I also purchased, the rebuild is cvoming along nicely. Thanks Webike, great job guys. View detail
Fits: YAMAHA XSR900, YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-10, YAMAHA MT-01, YAMAHA FZ8, YAMAHA FZ-1, YAMAHA FZ-1N, YAMAHA XJ6N, YAMAHA XJR400, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA TDM850, YAMAHA TDM900, YAMAHA WR250R, YAMAHA WR250X, YAMAHA SEROW250, YAMAHA DS250, YAMAHA SR400
Use of domestic high performance Material!
I bought this Motorcycle Cover for my SR400 for fun. I bought this Motorcycle Cover because I bought an SR400 to play with and I bought this Motorcycle Cover! Also, the rainproof performance is high and it is hard to be flooded! The price is expensive, but the quality is satisfactory and of a high standard! View detail
To change the oil.
Purchased to replace Element along with Oil replacement.
It was well made and worked fine.
View detail
TZr50R Water pumpDrain washer
[How is it used?
Used during EngineO/H of YAMAHA/TZr50R.
This product is a Water pumpDrain washer.
Note that if this Copper Washer is ruined, it will lead to coolant leakage.
How was your experience with it?
The OEM parts have been used without any problems.
No coolant leakage.
How did it compare to other products?
No comparison can be made because there is no external company.
However, since it is also a regular Washer, it may be compatible with other moped etc. Parts.
[Points to note]
Note that once attached, it will be replaced the next time it is disassembled.
View detail
Replace Red with Golden Pad
I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `)
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail
Fits: YAMAHA FJR1300, YAMAHA FZ8, YAMAHA YZF-R1, YAMAHA YZF-R6
The texture is lovely.
Used in 2008 YZr-R1.
Simultaneous replacement of Grip and Bar End.
If you install it as it is, there is a large gap between the end of the grip and the end of the bar, which is not a good parenthesis. Well, there are many motor cycles like that.
It is not enough to just attach a pontoon.
This kind of thing can be done neatly by modifying and adjusting it to suit the motorcycle.
The spacer was kindly included in the kit, so we shaved off about 4mm of the gap and adjusted it to 1mm on the Throttle side.
This is a consideration that the manufacturer has gone to the trouble of creating a high quality product, so it should have a good parenthesis.
View detail
Has the part number been changed?
I have not seen any particular note, but I assume that if you order with this part number, you will probably receive the one with the -80 suffix, and from the aggregate information on the Net, it seems that some Filters, including the -61 one, have been unified with the new part number (-80 suffix).
It is a bit of a shock to receive a different part number without any explanation, but you will be able to use it without any problem.
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Genuine Yamaha Hose 7 for FZ1 2008
There was nothing particularly wrong with the old part structurally but it did look in bad shape witht the colouring etc. Time for a new one. Finding the right hose was easy by checking the Yamaha schematics. The hose itself is a good sixze but that is not really reflected in the price, very good value for money in my books. I did have a couple of other parts in my order for this bike and got them all shipped as one and saved a few pounds too. The shipping took 5 days and all my order was in tact and perfect. The hose does come in the standard Yamaha packet and was surrounded with bubble wrap. It has a nice outer sleeve for heat protection and is fairly rigid but does have some flex to it. Perfect. Not really much else I can say about this as there were no issues in the hose or in fitting it. Looks a lot better than the old pipe which did have some signs of wear on the inside by the way. Very pleased. View detail
It got brighter.
I purchased this because Light was dark.
It brightened up as expected!
View detail