Reviews
Good product
Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Front forkOH of BMW R1100RT
I was searching the Net for a front fork on my R1100RT that was leaking oil and found this one that would fit. OEM is over 3000 yen a piece. View detail
Fits: YAMAHA YSR50, YAMAHA TDR50, YAMAHA Axis, YAMAHA JOG Zr, YAMAHA TZR50, YAMAHA TZR250, YAMAHA TZM50, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, YAMAHA RZ125, YAMAHA RZ50, YAMAHA SDR, YAMAHA RD50, YAMAHA GT50, YAMAHA GT80, YAMAHA JOG, KAWASAKI KS-2, YAMAHA BW's, KAWASAKI KS-1
Slightly modified
Used for TW200 (2JL)
The coils were not in good shape during the restoration, so, well, it's an old bike, and I had to replace them.
The compatibility chart said it would work, but to be honest, it wasn't exactly a poncho.
I had to shave the edges of the plastic on the body, shave off the part where the frame meets the plastic, and sweat.
Maybe it's just my TW, but I managed to get it to work.
Performance Quality is fine.
View detail
Blue empty parking.
Used for DUCATI 996.
I bought this because I am renting and park Blue empty, but I never want to let it rust because it is a rare car.
The rainy season is absolutely RECOMMENDATION.
It also has a hole for a lock, which is a little expensive, but it is a must-recommendation for those who park Blue empty.
View detail
Fits: YAMAHA SR250, SUZUKI 250SB, HONDA 250T LACustom, HONDA AX-1, HONDA CL135, HONDA CL350, HONDA CL72, HONDA CL77, HONDA CM250T, HONDA CM400T, HONDA CRM250AR, HONDA CRM250R, HONDA FTR223D, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT, HONDA MT250ELSINORE, HONDA MTX125R, HONDA MTX200R
Does not fit the KL250 Sherpa.
The Manufacturer's list of compatible models says it is compatible with KL250 Sherpa, but that's too long.
If installed normally, there will be excess
The quality of the product itself is not bad, so I think it will be fine for cars with longer forks.
KL250 Sherpa's Fork outerTop to bottom of trident is 240mm
Catalogue value WheelTravel is 230mm
100mm remains above the Outer even when shrunk the most without processing.
This would make Stroke about 130mm.
If it was just for Inner Tube protection purposes, it would be fine, but I don't think it is, so I cut it off, even though it will look very ugly lol.
In hindsight, I lightly regret that using the top half wouldn't have made it so ugly.
However, even in this state, the Stroke will be reduced by about 50mm
Boots itself becomes Bump rubber.
Even other companies' products that say they are compatible with KL250 Sherpa are quite long.
Would it be better to just use a shorter product with more extension?
Maybe I'm losing my mind, but I'd like to find a good product!
I bought it + even processed it so I'll be using it for a while lol.
View detail
Black still seems to be vulnerable.
Used outdoors in full sun for less than 1 year and 2 months after purchase.
What was originally Black has faded and turned gray.
It also tore like a rip, so I had to use curing Tape to plug the hole for now. Is it still susceptible to deterioration by sunlight if it is Black?
I am using two more in parallel, Black and Silver. the Black is about a year old. It has faded a bit but still seems to stand up to the test.
I thought I was using them the same way, but I am wondering how a difference of two months can make such a difference.
Silver is about 5 months old. It is still clean.
I was lucky that the exhaust pipe was not touched.
Since the original price is over $8,000, it would be nice to have a little more durability. However, the Motorcycle Cover is a consumable item. However, Motorcycle Covers are consumable items, so I am not that dissatisfied with them since they cost around 4,000 yen at Sale and I prefer black. But I think I will get the Silver color next time.
View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
520Conversion
Conversion520 from 530. It is easier to push and move. View detail
Thank goodness it's readily available.
I used KIJIMA oil for replacing the oil in my KLX230R. I bought KIJIMA oil because it takes a long time to deliver OEM products and they are often more expensive than the Replacements. I was able to replace the oil without any problems. View detail
Easy to grip due to its folded shape
I replaced the lever because it had been broken by a standing fender bender. I think it is easy to grip even for a person with small hands due to its folded shape. However, the quantity:Pair (for Left and Right) If you want to replace the Levers with different shapes, you should use the Quantity:Pair (for Left and Right) We recommend replacing the lever at the same time. View detail
Buy wisely in bulk! Recommendation for those who own several motorcycles!
10 pieces Quantity for business use" at a great price:The "Set" is a great recommendation for those who own several motorcycles, because you can buy them in bulk at a low price! It may seem like a lot to have 10 sets at once, but I have a Ninja 250SL and a Z125, and the discount is very helpful for me! View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
520Conversion
I was able to Conversion from 530 to 520. View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
Fits: KAWASAKI W650, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZRX400, YAMAHA FZX750, YAMAHA TZR250, YAMAHA FZR250, SUZUKI GSX250, SUZUKI GSX400, YAMAHA SR500, YAMAHA YZF-R25, YAMAHA XJR400, YAMAHA R1Z-Z, YAMAHA FZ400, YAMAHA SR400, YAMAHA MT25, YAMAHA MT03, HONDA X-4, HONDA VT400, HONDA CL400
If there was a little more room for Size, there would be nothing to say.
Purchased the L size to use on Kawasaki ZrX400 after checking the fitment guideline.
I can do what I can do with the Cover, but it's pretty tight.
Fastener is useful and the Material seems durable, so that part is a little disappointing.
I'm thinking that one LLSize above would have been just fine.
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
Fits: SUZUKI DESPELADO, SUZUKI BOULEVARD, SUZUKI MARAUDER, SUZUKI VANVAN, SUZUKI TEMPTER, SUZUKI INTRUDER, YAMAHA Ensiter 125, SUZUKI SAVAGE, YAMAHA FZX750, YAMAHA XV950, YAMAHA R100 ROADSTER, YAMAHA VIRAGO, YAMAHA XV1900, YAMAHA DRUG STAR, YAMAHA Bolt, YAMAHA SR400, YAMAHA SR500, HONDA CTX700N, HONDA CB650, HONDA DREAM
Good cost performance for the production
I think the quality is high for the low price.
The body is a rather heavy gold, and the lens cut is a bit stylish.
I think that the cosmetics of inexpensiveness in relation to price is the strongest.
View detail
Gone.
Within a month of using it, the wind blew it away. I only had to put it on and wrap one band around it, so when I came home on a windy day, only the band was left and the Motorcycle was completely naked. View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail