Reviews
NS400 Carb rebuild
Well made part fits well with no issues, replacing the original plastic part. Finish on part is good, got the replacment rubber sealing caps to complete as the original rubber had gone hard after 40 years. View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Fits: YAMAHA YSR50, YAMAHA TDR50, YAMAHA Axis, YAMAHA JOG Zr, YAMAHA TZR50, YAMAHA TZR250, YAMAHA TZM50, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, YAMAHA RZ125, YAMAHA RZ50, YAMAHA SDR, YAMAHA RD50, YAMAHA GT50, YAMAHA GT80, YAMAHA JOG, KAWASAKI KS-2, YAMAHA BW's, KAWASAKI KS-1
Slightly modified
Used for TW200 (2JL)
The coils were not in good shape during the restoration, so, well, it's an old bike, and I had to replace them.
The compatibility chart said it would work, but to be honest, it wasn't exactly a poncho.
I had to shave the edges of the plastic on the body, shave off the part where the frame meets the plastic, and sweat.
Maybe it's just my TW, but I managed to get it to work.
Performance Quality is fine.
View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
Fits: HONDA CB900, HONDA CBR250R, HONDA CBR250RRR, HONDA VFR400R, HONDA VFR400R Pro Arm, その他 , HONDA AX-1, HONDA CBR400F, HONDA CBR400F F3, HONDA CBR400R AERO, HONDA FT400, HONDA FT500, HONDA NS250F, HONDA NS250R, HONDA NS400R, HONDA VFR400Z, HONDA VT250F SPADA
Bolt
Bolt rusted instantly, but otherwise satisfied. View detail
Very Nice Kit
Received the kit quickly and was very impressed with the quality. Some modifications required but easily done by a local engineer. Very happy with the purchase. View detail
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
For Upgrade of front brakes master
Upgraded TRX850 front brakes master with NISSINsemiRadial brake master.
I opened the package and checked the details and it is very QUALITY and the accuracy is perfect!
Installation on the car body is also completely hassle-free, as the product is guaranteed to fit the car body.
The braking feel is completely different from that of the OEM, with braking power rising quickly from the beginning of the grip and very good control after the grip has been applied.
The design of the product is also compatible with out-of-print cars.
The work kill was set as intermediate because the brake fluid had to be drained once and the air was drained again after installation.
Please refer to the following URL to see the installation work as it is uploaded in the diary.
https://imp.webike.net/diary/251725/
View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
Article of good quality
Product of good quality and arrives fast. Well pack and arrives in good order. Parts are genuine. Tracking facility are reliable View detail
Fits: HONDA CB750F Bol d'Or II, HONDA fusion, HONDA Wing Custom, HONDA wing, HONDA g, HONDA VT250F Integra, HONDA VF750F, HONDA VF400F Integra, HONDA V45 Magna, HONDA NS400R, HONDA NS250R, HONDA NS250F, HONDA GB500, HONDA GB400, HONDA GB250, HONDA FT500, HONDA CBX750 Horizon, HONDA CBX750F, HONDA CBX250RS, HONDA CBR400F
Red Pad to Hyper pad
I replaced the brake pads with Hyper pads, which are a little cheaper than the Red pads, but they seem to be less durable than the Red pads. The work started with the chamfering of the pad, and it only took about 15 minutes to remove the pad and assemble it. The operation is the same compared to the Red Pad. The durability of the Pad is different from that of the Red Pad. I have tried Vesra and Red Pad, but I feel that the durability is proportional to the price. Also, GB250 CLUBMAN is a 2-pot caliper, so the pad wear is concentrated on the One Side. It seems that it can still be used if it is assembled in the opposite direction, but for safety reasons, I will not do so. View detail
Fits: YAMAHA YSR50, YAMAHA TDR50, YAMAHA Axis, YAMAHA JOG Zr, YAMAHA TZR50, YAMAHA TZR250, YAMAHA TZM50, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, YAMAHA RZ125, YAMAHA RZ50, YAMAHA SDR, YAMAHA RD50, YAMAHA GT50, YAMAHA GT80, YAMAHA JOG, KAWASAKI KS-2, YAMAHA BW's, KAWASAKI KS-1
Idling is stable
[How is it used?
TZr250RS (3XV) The Idling of the Ignition coil was not very stable and the Piston ring was replaced.
Both OEM Parts and Uotani are expensive, but I was worried about the quality of Chinese products, so I chose this product.
Was the one you received as per Image?
It is quite Orange Body and Plug cord as shown in the picture.
The mounting bracket is only held in place by a screw and can be removed quickly.
Was the installation difficult?
Simply take the Mounting Hardware and replace it with the attached Ignition coil.
A plug cap is also required separately, but I used the NGK plug cap that was originally included.
The Right Side is just the right length for the cord, and the Left Side is too long as it is, so we cut it.
How was your experience with it?
Idling has stabilized considerably, although I have only been using it for a short time.
Both low and high RPMs have been used without problems.
I am satisfied with the resolution of the ailing area.
[Included Parts:were they on?
Plug cap is not included and must be purchased separately if needed.
And, of course, Quantity:1pc., so in 3XV, Quantity:2pc. Set purchase is required.
[Was there anything that disappointed you?
As others have mentioned, the Waterproof Cap is loose and the Ignition coil terminals are bare. (OEMs, too.) So Waterproofness is doubtful.
【Review】
Unstable Idling is now stable and comfortable.
It is a consumable item, and the price is not that high, so there is no harm in replacing it if you do not feel comfortable with the current situation.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R400, SUZUKI GSX-R1000, SUZUKI GSX-R1100, SUZUKI GSX-R1000, SUZUKI B-KING, SUZUKI GSR750, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1100/ZX-11, KAWASAKI ZXR400, KAWASAKI ZXR250
Buy for Repair
[How is it used?
I originally used a YOSHIMURA water temperature gauge, but purchased it as a repair item because the Sensor's Wiring had been disconnected.
Was the one you received as per Image?
Since the sensor was originally attached, the shape, etc. were as per the Image.
I wonder if it was a problem with the ROD or the spec. at the time. In the Webig image, the Sensor part was red in color and the Connector part was black, but the product I received was gold in Sensor part and white in Connector part.
Although the color is different, I don't particularly care because I could use it without any problem.
Was the installation difficult?
Since it was a replacement for the sensor that was originally attached, we replaced it in the same way as removing and tightening the screws.
It happened that the coolant was replaced at the same time, so it was not that Large strange, but if you try to replace it without draining the coolant, it will be Large strange.
How was your experience with it?
Water temperatures that were not displayed are now displayed properly.
[Included Parts:were they on?
Sensor only.
[Was there anything that disappointed you?
It is an exclusive product, but the price is higher than other companies' products.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R400, SUZUKI GSX-R1000, SUZUKI GSX-R1100, SUZUKI GSX-R1000, SUZUKI B-KING, SUZUKI GSR750, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1100/ZX-11, KAWASAKI ZXR400, KAWASAKI ZXR250
Water temperature sensor
Used for Progress2 installation.
I think it is also nice that the Seal tape is wrapped from the beginning.
When installing the Coolant, we did not pull out all of the Coolant, but just a little bit where the Sensor hits the Coolant, and then we sucked out and installed it.
View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
Vehicle Inspection Measures
NORMAL H4 will pass vehicle inspections, but for further peace of mind, 60W is labeled as equivalent to 100W.
Highly efficient Type was selected.
I measured the illuminance with a smartphone app and saw that it was up about 20%.
However, the H4 was used for years before replacement, and even if it is NORMAL, replacing it with a new one will pay for itself.
I also think it will increase illumination.
Because of its high efficiency, we are concerned about its durability and would like to evaluate it in the future.
View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
It is over the price
I have installed this on a 2008 ABSMODEL CB400SB. The reason why I decided to install it on my CB400SB is that the OEM Master Cylinder is 15 years old this year and I thought it was time to change the overhaul to Semi-radial. This year's CB has a double disk, but since it is a single-press 3-pot, the time lag after the OEM lever is held is far from my ideal brake with a large time lag. I think it is a shame that the CB is equipped with a single-press caliper, because it eliminates the good qualities of the CB. (As I thought, the single push Caliper was still improved to opposing 4 pots when the Model was changed). I have changed various pads to improve the time lag and changed the brake fluid to BF4 from WAKOS to improve the time lag a little, but it is a characteristic of Caliper. But after I installed Nisshin's Semi-radial master, the time lag is gone and I am very satisfied with it. To be honest, I thought that Semi-radial would not be much different from OEM, but it is not at all. With the OEM master, I felt the front fork suddenly start to lag after I hold the lever, and then I felt the front fork start to lag suddenly! The Lever touch is much stiffer than the OEM. The price is not too expensive, and I am satisfied with the Large brakes because I have no more complaints about the Brakes over the years.
Here is the installation review
First of all, the brake switch will not be long enough, so wiring will be required. I also expected this, but if you are using a custom lever, you will not be able to use it. (I remember that Nisshin only offered Lever in Silver color in this Semi-radial, but there may be a Black color as well.) I think this is one of the best features of this Master Cylinder. The air bleed was very easy to do, which is one of the good points of this Master Cylinder, and I think it will take less than 30 minutes if you follow the normal procedure. If you hold the lever at an angle to the body of the car, the air in the Master Cylinder can be easily released.
I personally felt it was one more Review.
The convex part that holds the banjo bolt faces almost directly down, so the direction of the hose is limited to either directly above or directly below the bolt. In my case, because I have an ABSMODEL, it is impossible to use an external Hose, and since the angle of the banjo bolt cannot be changed, I ended up with a mounting position that puts a lot of load on the Hose, either directly above or directly below the bolt. The Hose is not designed to be installed directly above or directly below the Torque wrench, so the Hose would have to be installed directly below the Torque wrench. If the convex to hold the Hose had come out from the side, there would have been no burden on the Hose, so it would have been better to have the convex on the side like the OEM. (I plan to consult a Motorcycle shop at that time as the Brake hose is old and I plan to change it.) If you have a mesh hose and can change the direction of the banjo, I think you should prepare a diagonal banjo so that you can work smoothly. I had to re-grease the moving parts of the lever because they looked dirty. I thought I could see the Fluid if I changed the direction, but I didn't because it would have put a load on the hose. I have a water temperature gauge next to the inner cowl, but it is very difficult to see the tank. I used M10×1.25 bolt from Swage line.
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
I've always loved it.
It is thick and easy to grip, and I have been using it for a long time. View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Firm and direct feel
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The material feels firm and provides high grip. I imagine it would perform well in wet weather, too. I would recommend these grips to those who prefer a "direct" feel. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R400, SUZUKI GSX-R1000, SUZUKI GSX-R1100, SUZUKI GSX-R1000, SUZUKI B-KING, SUZUKI GSR750, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1100/ZX-11, KAWASAKI ZXR400, KAWASAKI ZXR250
cb400sf Progress2
Purchased as Sensor to attach Progress2 to cb400sf
The temperature was firmly detected and displayed.
Durability is still unknown.
View detail