Reviews
7 Days to go 7887 km!
As per usual, not only was it less expensive to buy and ship from WeBike, it came packed very well in a nice WeBike box! If you are from North America or in other parts of the world don't think twice about buying from WeBike. Every one of my many purchases have been very positive. That and the selection is great! View detail
Helpful in preventing Prank
It looks better than the OEM resin cap and requires a hexagonal wrench to open and close, but there is no oil level gauge, so the OEM cap must be kept in stock. View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR REVO, HONDA CB400SF VTEC REVO
Mounted on NC39
I am satisfied with the OEM color, so there is no sense of discomfort after installation.
Since the paint can be scratched off by stepping stones while driving, it is a good idea to put a protection film or the like on the front end of the car so that you can go touring with peace of mind.
View detail
License Plate Base
Installed on a '24 GSX1300R HAYABUSA 。 It was Exactly without interfering with YOSHIMURA's Fender lessKit. View detail
etc., etc., etc., etc., etc., etc., etc., etc. (p∀p) aha!
[How is it used?
After about 2 years of use, my Cover finally tore and was no longer able to withstand normal use, so I decided to purchase one.
Was the one you received as per Image?
It was just as in the Image! Thanks for the heat resistant Seat!
How was your experience with it?
It is also good in the rain without letting it through properly!
[Points to note]
I have used Seats in a variety of price ranges, and have concluded that Balance is good for use in uncovered Blue Sky parking, replacing a few thousand yen price range every few years.
Elastic band is used to keep the Seat from flipping up in high winds.
How did it compare to other products?
DAYTONA is one of the manufacturers we trust, and they also sell Garage.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
The holes for the front and rear tire locks are also good. I have never used it (laugh).
View detail
Fits: HONDA CB400SB VTEC Revo, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC, HONDA CBR900RR, HONDA CBR600F2/F3/F4/F4i PC25/PC35, HONDA CBR400R NC23, HONDA CB400SB VTCE REVO, HONDA CB400SF VTCE REVO, HONDA SHADOW400, HONDA SHADOW1100/1100Classic, HONDA VTR250, HONDA VT750S, HONDA VFR400R NC30, HONDA VT400S, HONDA RVF400 NC35 , HONDA NSR250, HONDA NC750X RC72, HONDA NC750S RC70, HONDA NC700X RC63, HONDA CBX400F
GOOD looking
Installation itself is very easy.
With Adjust so it can be adjusted to your grip.
I think it is a very flourishing Parts with good detailing.
View detail
Barrel-shaped without being too flashy.
I wanted a Barrel Style Grip Pierced Type and purchased it. I have been using it for several months without any pain in the rubber or any problem that affects the accelerator operation.
Since it is not a blatant barrel shape but a casual bulge, I don't feel that the Large grip is different compared to the Grip with a straight line design. It is not a barrel shape, but rather a subtle bulge. Still, the Fit feeling in the hand is comfortable.
View detail
SUPER SPORTS750Middle to Exactly
ExactSize for YZFR-7, CBR250RR, etc. Can also be used loosely for pcx160.
Ventilation in the Mirror position provides excellent heat exhaust and prevents heat buildup even in the summer.
View detail
Cospa best
Inexpensive and perfect quality
Safe to use
View detail
An extremely popular choice when looking for a very comfortable grip at an affordable price
About quality and texture - The soft rubber doctor grips from Kijima are made from rubber and with a simple design and soft surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The soft rubber doctor grips are an extremely popular choice when looking for a very comfortable grip at an affordable price. All round better grip then the original Honda Grom grips with a focus on comfort due to their shape and the material used. Products to buy together - A suggested product to purchase with the soft rubber doctor grips would be a heavy set of bar end weight to further increase comfort by removing addition vibration from the handke bars. Difficulty of installation - The installation of the soft rubber doctor grips is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the grips to the handle bar and thottle tube. An air compressor if available will ad in the removal of the original grips with ease. Cost performance and comparison with other products - I find the cost of all the products Kijima sell to be great value when compared to what most other companies sell their products for and the soft rubber doctor grips are no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the soft rubber doctor grips, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
Good pad
It's a really good product. Both the finish and the design are excellent. I bought the multiba twice. Thank you for your prompt delivery. I recommend this product to others, too View detail
Fits: DUCATI SCRAMBLERIcon, DUCATI 1299 Panigale., BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH STREETSCRAMBLER, SUZUKI VANVAN200, SUZUKI BANDIT1250, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM250, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DL1000 V-STROM650, SUZUKI Intruder Classic
Cute.
Pad thickness is just right and cute.
It would be better if it were cheaper.
View detail
For CB250F
good quality and great deal from Webike, super fast international shipping, very well packaged and a reasonable price, thanks Webike team great! View detail
It was replaced under warranty.
The other day, I was told that Quantity:Pair (for Left and Right) The footpegRubber on my LARGE footpeg came off and was under warranty. I received a new footpeg and replaced it. Thank you very much. View detail
For CB250F
Same as the genuine Front Fork Oil Seal Set . About shipping and packaging Very good packaging.Fast shipping no way to dammage. About quality and texture Products to buy together realy genuine product. good qulity.Thanks to the webike team View detail
For THRUXTONRS
OEM replacement for Triumph is not available, but if the OD and internal Screws match.
Can be installed. Always change Oil and Drain plug Magnet
This product gives me peace of mind when I look at it and worry about all the iron dust.
Overall length is slightly longer than tiger OEM, but no problem for installation.
View detail
A little short, a little thick
I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people.
View detail
Titaniumium color!
Small but finely crafted
Luxury that you can feel in your hands
Worth the Gold!
View detail
PetitCustom
PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color!
View detail
Standard PetitCustom
For Caliper's color insert!
Trial installation before putting brembo in.
4mini standard color:??
View detail