Reviews
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Easy to hang and wind resistant. Very good.
I use this Repeater on my CT110 HUNTER CUB and GB250 CLUBMAN. It is my favorite.
I bought it last year when I bought a CT110 HUNTER CUB, because I was planning to add a front carrier and a RODCarrier to it. I am sure it will be a good reference for those who are considering purchasing it.
The front carrier is made of DRC, the largest class, and is fixed at the most forward position, so the front of the handlebar is considerably longer than in NORMAL, The height of the LeftFront section of the Rear Carrier is 10cm higher than the Seat. The lower part of the front wheel and Quantity:Pair (for Left and Right) As you can see in the photo, I can close the RearFastener to the very bottom, even with the bottom rope tightened quite a bit. I live in an area that is occasionally exposed to strong winds, and the Seat has never rolled up.
Also, I have been using it for over a year now and it has not deteriorated much. (There is a short period of time when the parking Space is in direct sunlight.) Not much dirt on it. (It has a roof, so it is virtually dry even in the rain.) and I have never washed the surface with water. I am very satisfied.
I bought it for GB250 CLUBMAN almost one year after CT110 HUNTER CUB. It is rather a little bit large, so the front wheel lower part and the quantity of the front wheel are a little bit smaller than the original size.:Pair (for Left and Right) The Adjuster rope at the bottom is fully squeezed. There is still room to spare, but not so much that it will flip up in the wind, so we are not worried at all.
Perhaps if it were exposed to rain and direct sunlight throughout the day, the evaluation of deterioration might change, but I cannot comment on that.
View detail
Stiff
It is somewhat stiff, and I am concerned about the feeling of the Pad being scraped during Brake.
The Red Pad went away very quickly, so I will use it with high hopes for durability.
View detail
It seems to be more durable than OEM.
It was firmer than OEM and seemed more durable.
Since these are completely self-satisfied Parts, there is little need to replace them unless the OEM Mud Guard runs out or something, but I replaced them out of self-satisfaction.
View detail
I can last three years
In 3 years, the Black will fade and become White, and it will catch and become ragged.
It needs to be replaced periodically.
Exhaust Guard is included in the price.
View detail
Style& sound is perfect!
I bought a CROSS CUB instead of a CT110 HUNTER CUB to install the CABTON Exhaust System!
It looks great, just as we wanted it to.
Sound is also light.
View detail
Fits: HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUB110, HONDA CROSSCUB110
The red finish improves the appearance over the original ignition coil but
About quality and texture - The ignition coil full kit from Kitaco is made from injection molded plastic with a red surface finish and includes aluminium spacers, the quality from the overall fit and finish is perfect. About the feeling of use - The red finish improves the appearance over the original ignition coil but sadly is not visable on the Grom during normal use. The ignition coil full kit is worth the expense for the noticeably smoother and stronger pull through the RPM range. Products to buy together - A key product to purchase when using this ignition coil full kit is a spark plug cap as it is not included but required to complete the transition from the original to a performance system. Difficulty of installation - The installation of the ignition coil full kit is an simple task that took 0.5 of an hour complete. Some mechanical aptitude, knowledge of disassembling the Grom and the use of basic hand tools is what is required to secure the ignition coil to the frame. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the ignition coil full kit is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the ignition coil full kit, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA CROSSCUB110, HONDA MONKEY125, HONDA CT125, HONDA DAX125, HONDA GROM
Oil leak
I ran around the neighborhood and after one night it leaks oil. View detail
Titaniumium color!
Small but finely crafted
Luxury that you can feel in your hands
Worth the Gold!
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO
Cost-effective!
This is a must-have Items for CROSS CUB Oil replacement. All packing and filters to be replaced are included, and the discount is very reasonable. I use CROSS CUB for touring, so I replace the oil only about twice a year. So I replace Packing and Filter every time. I will continue to repeat this service in the future. View detail
KITACOGasket
I used it to replace the exhaust system on my ADV150 and it worked fine with no exhaust leaks.
There are no particular difficulties in installation.
View detail
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA Giorno, HONDA Today, HONDA PCX160, HONDA PCX150, HONDA PCX, HONDA Dunk, HONDA Dio110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA LEAD125, HONDA ADV150, HONDA ADV160
Fits well with 2018 Crosscub.
I purchased this because the thread of the original drain bolt was blunt.
Although it is not visible, it looks cleaner and more durable than a genuine drain bolt.
The O-ring has now traveled 20,000 km and is still in good condition.
Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. -------------------------------------------------- -------- I purchased this because the thread of the original drain bolt was blunt. Although it is not visible, it looks cleaner and more durable than a genuine drain bolt. The O-ring has now traveled 20,000 km and is still in good condition. Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. Powered by Google Translator
View detail
It goes well with the 2018 Crosscub.
There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big.
Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down.
-------------------------------------------------- -------- There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big. Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down. Powered by Google Translator
View detail
To replace Exhaust System
2Quantity:The set is reasonably priced, and KITACO offers peace of mind. View detail
Cheaper than OEM
This will be no problem, unless you need OEM! You can spend the difference on Oil. View detail
1pc. is Smaller
The first one was a little smaller than the second one, so the Quantity:Set and it's falling down.
The other one was a good Just fit.
View detail
Is good
[How is it used?
I use it for commuting.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
I don't think it's difficult, just tedious.
How was your experience with it?
I think it works well and has a long life.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
I'm not sure Dust is the way to go.
View detail
Less expensive than OEM
It is less expensive than OEM. Performance is probably comparable to OEM. View detail
The quintessential YOSHIMURA!
Texture is very good! Logo is also very good View detail
ExactSize to Seat
I purchased a Mesh Seat cover to keep my Seat from getting too hot.
Seat size is EXACTLY the same!
I don't know if it depends on the fabric of the pants, but when I put on the braces, my buttocks slide forward.
View detail
STD Size
Motorcycle I bought used, originally came with 15T but I changed it back to STD Size 14T.
The Rear sprocket and Chain were replaced at the same time as the FrontSprocket, making it much easier to drive.
View detail