Reviews
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
I wonder if I can have a Stock.
[How is it used?
CRF125F was fully greased up one year after delivery. I put a lot of grease in when the car was new, so the bearings were in good condition, but two seals had died, so I bought new seals. I bought it because it is a pain in the ass to replace seals.
Was the one you received as per Image?
As per Image
Was the installation difficult?
After removing the old seal, insert the new one as far as you can by hand, and finally insert it in a socket that matches the size of the old seal. You can put in the new seal as far as you can, and then insert the new seal by hand. The other side is a good example, and the service manual has instructions on how to put it in.
How was your experience with it?
It will firmly prevent water and mud from entering.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Nothing in particular. If you are a CRF125F rider, you can use "Quantity".:2pc. I think it would be nice to have a Stock as much as Set.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Some vehicles seem to have oil seals that have been damaged during assembly since new. It is a good idea to pay attention to this.
View detail
Fits: SUZUKI GSX-R1100 (GU74A), SUZUKI GSX-R1100 (GV73A), HONDA CBR250RR (MC22), HONDA CBR250R (1-light vehicle MC41), HONDA CBR125R (JC50), HONDA CB750 (RC42), HONDA CB650F (RC83), HONDA CB400SS (NC41), HONDA CB400X (NC47), HONDA CB400SF (NC42), HONDA CB400F (NC36), HONDA CB400F (NC47), HONDA CB400SF (NC39), HONDA CB250F (MC43), HONDA CB1300SF (SC54), HONDA CB1300SF (SC40), HONDA CB1000SF (SC30), HONDA 400X (NC47), HONDA CB1000R (SC60), SUZUKI GSX-S1000 (GT79B)
Finally, it was not available.
I took the time to disassemble the Light area to remove the exterior, but Material:The Rubber Waterproof Cover could not be attached and I gave up on installing it.
It was a waste of time, effort and Gold.
View detail
Fits: HONDA ST1100 A, HONDA XL1000V VARADERO, HONDA HURRICANE, HONDA ST1100, HONDA Shadow slasher750, HONDA SHADOWCustom, HONDA Shadow classical, HONDA CB400 SB, HONDA CB400F, HONDA CB400 SE, HONDA GOLD WINGSE, HONDA GOLD WINGF6B, HONDA GOLD WINGF6C, HONDA GOLD WING, HONDA Integra, HONDA Integra, HONDA Africa Twin, HONDA Integra S, HONDA Africa Twin, HONDA XRV650J
I will use it next time!
I did not use the Filter this time because I just replaced the Oil and did the Filter next time. The quality seems to be good, so I will try it next time and may continue to use it in the future. The most important thing is the cost performance. View detail
Fits: KAWASAKI NINJA250SL, HONDA CRF250M, HONDA CBR600RR, HONDA CBR1000RR, HONDA CB400SF, HONDA CB1100, YAMAHA WR250R, KAWASAKI ZX-25R, KAWASAKI Z900, KAWASAKI Ninja250, KAWASAKI Z650RS, KAWASAKI Ninja650, KAWASAKI Ninja400, HONDA NC700X, HONDA NC700S, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, YAMAHA CYGNUS X, YAMAHA Majesty-S, YAMAHA NMAX
One point custom
I want to Wiring with Grom's Custom and Circuit Running
Purchased
At first I was wondering if I should choose Black color, but then I thought about customization.
I chose the red color as one point, but it is not too conspicuous.
It was very nice to feel like I was making a statement as well.
View detail
Fits: HONDA Forza(MF10), HONDA Forza(MF10), HONDA glom, KAWASAKI ZX-9R, KAWASAKI ZX-RBF, KAWASAKI ZX-RAFA, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-14R, KAWASAKI Z125 Pro, YAMAHA YZF-R25, YAMAHA YZF-R3, KAWASAKI W650, HONDA NC700X, HONDA NC700S, YAMAHA MT-25, YAMAHA MT-03 (2015-), HONDA CRF1000L Africa Twin, HONDA CBR400R (2013-), HONDA CBR250RR(2017-)
Circuit Running
As a Bolt that can be wired, as it is required for Circuit driving.
Purchased
Steel was selected instead of aluminum for durability.
The quality, etc. can be used without any problems.
View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Custom and vibration prevention around handlebar
[How is it used?
Installed in the hope of customizing the handlebar area and preventing vibration.
I went Touring twice.
Was the one you received as per Image?
The weight was heavier than I had imagined.
Black chrome is a little more expensive than the others, and I was also worried about Titanium,
I was happy with the coloring on this one.
Was the installation difficult?
It is easy as long as you can remove the OEM ones, as they are only tightened with a hex.
It would be better to add an anti-loosening agent for Screw.
How was your experience with it?
Although the OEM ones left my hands numb after about 100km,
After changing to this product, it is almost gone.
[Included Parts:were they on?
A choice of one or two Spacers can be made, thereby allowing the use of
The length of Screw changes.
Unless you want to create a gap between Bar End and Handlebar,
I think one Spacer is fine.
[Was there anything that disappointed you?
None
View detail
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
Proven and good looking.
I think it's a little expensive, though.
I personally think it's the best looking of the Monokey base.
Installation itself is very easy.
View detail
Fits: HONDA 400X, HONDA AfrIca TwIn, HONDA BROS I (NT650), HONDA BROS II(NT400), HONDA CB-1, HONDA CB-1 II, HONDA CB1000R, HONDA CB1000SF, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300DC X-4, HONDA CB1300SF, HONDA CB1300SB, HONDA CB400F, HONDA CB400Four, HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Easy to see the effect when installed at the same time as Oil replacement
Purchased for the claimed Power and Torque up.
This one has not been effective so far.
What I realized most after the installation and oil replacement at the same time was the improvement in operability.
The familiar doldrums that occur at low speeds are considerably reduced.
The acceleration startup became more straightforward, but this may be due to the Oil.
I would like to continue to monitor the condition closely, but it seems like a change that cannot be noticed unless you ride with an eye on the quality of your driving.
The quality of the product itself is very good and it looks great as a color accent for your feet.
However, it is expensive, or rather too expensive, as a Cost to Filter.
O Ring is required for each replacement, so you need to prepare S1-compatible Rings each time you use a spare 1 pc.
It is for people who want to try various things on their Motorcycle rather than cosmetics.
The same product is available even without this MORIWAKI collaboration, and while it is possible to make a recommendation in terms of self-sufficiency, it depends on the person whether it is necessary or not.
View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
If you feel up to it, why not give it a try?
OEM Product has deteriorated somewhat and was replaced.
It is really just a fashionable color. It has nothing to do with driving performance.
However, I think it is also important to pay attention to such details as a hobby.
View detail
Fits: HONDA Rebel300, YAMAHA YZF-R3, HONDA CB500X, TRIUMPH STREET TRIPLE, HONDA CB500F, TRIUMPH BONNEVILE, TRIUMPH SPEED TRIPLE S, DUCATI M400S, MV AGUSTA BRUTALE750S, DUCATI M400METALLIC, DUCATI M400DARK, DUCATI M400DARK, DUCATI M400, DUCATI M400, DUCATI M400, DUCATI M600 DARKCITY, DUCATI M600 METALLIC, DUCATI M600 DARK, DUCATI M620S, DUCATI M600
People who do not like static electricity need to be careful.
[How is it used?
Purchased for two Covers
Was the one you received as per Image?
Surprisingly hard
How was your experience with it?
Static electricity generation is terrible!
[Points to note]
Anyway, static electricity is Great!
How did it compare to other products?
For people who want to buy a cheap product, and who say that luxury products also get tired and should be replaced after about two years.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA 400X, HONDA AfrIca TwIn, HONDA BROS I (NT650), HONDA BROS II(NT400), HONDA CB-1, HONDA CB-1 II, HONDA CB1000R, HONDA CB1000SF, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300DC X-4, HONDA CB1300SF, HONDA CB1300SB, HONDA CB400F, HONDA CB400Four, HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
For self-satisfaction.
I had about 4 Oil Filters as spares, so I could use the Oil Filters I had for the next 4 years.
I was very confused when I came to purchase the product.
I was wondering if the Gold amount is the same as replacing the CartridgeOil Filter 30+ times for the Gold amount.
However, I was excited and told myself that Engine oil flow is good without Garbage.
Since the purchase, MORIWAKI's Mark and colors have increased my satisfaction.
I also felt a little self-loathing because my motorcycle is a Rebel, so I don't turn it at high rpm, and I was later convinced that the oil fluidity had nothing to do with it.
I still have a CartridgeOil Filter and am considering whether to use it or not.
The sense of ownership is perfect.
View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Vibration countermeasure around handlebar!
I bought this product to prevent vibration around the handlebar of my MONKEY125. I have used similar products for my former SV650 and my current Z400, and have confirmed a certain effect, so I bought this for my MONKEY in hope of the same effect.
The vibration was not completely eliminated as expected, but I am satisfied that the vibration was considerably reduced.
I think it is worth a try for those who ride MONKEY125 and go to Longs & minus;Rings.
View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
Easy installation OK
Size and installation is easy. I am satisfied with the way it looks. View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Pretty good
It is not too flimsy and seems to be reasonably durable.
There are holes in the front and back for a chain lock and a belt stopper underneath,
I think the cospa is one of the better ones.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Slightly Larger
I bought this product because the Motorcycle Cover I bought at 2 Rinkan had a small hole in it due to deterioration within a year. It is completely outdoors without a roof. The environment is harsh because it is exposed to the wind.
I put this product on xr as it is, but it is a little Large size. It is a little too large. The total length is 220, so it is between L and LL.
The flapping and scratching were a concern, so I doubled up the Motorcycle Cover I had been using and put it on the bottom, which made things a little better.
The quality and functionality are good, and the price is reasonable, so if it lasts a year, it's good enough.
View detail
Fits: HONDA CB400SS, HONDA CBR400F, HONDA CBX400F, HONDA CBX400F, HONDA GB400, HONDA Rebel250, HONDA REBEL, HONDA REBEL, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB, HONDA CB400SF HYPER VTEC Revo, TRIUMPH STREET TRIPLE, TRIUMPH BONNEVILE, TRIUMPH SPEED TRIPLE S, MV AGUSTA BRUTALE750S, DUCATI M400S, DUCATI M400METALLIC, DUCATI M400DARK, DUCATI M400DARK
Check the Size before purchase.
I bought the LL for my 2023 NC750X because I had installed a Large type Su Cooleyn and Carrier,
Small (not unusable). 4L was repurchasedExactly. I recommend you to check the dimensions carefully before purchasing.
View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
You want to do something about vibration
[How is it used?
It was installed on a SUPER CUB110 Handlebar.
Was the one you received as per Image?
It is bigger than expected! Be careful.
Was the installation difficult?
An understanding of how Bar End works is required.
How was your experience with it?
The vibration that was bothering me was reduced.
[Included Parts:were they on?
There was no problem
View detail
Fits: HONDA VTX1800T, HONDA VTX1800N, HONDA VTX1800F, HONDA VTX1800C, HONDA VTX1300T, HONDA VTX1300R, HONDA VTX1300C, HONDA VT750SD, HONDA VT750SA, HONDA VT750S, HONDA VT400S, HONDA VT1300CX, HONDA VT1300CTA, HONDA VT1300CT, HONDA VT1300CS, HONDA VT1300CR, HONDA VFR800FD, HONDA VFR800F, HONDA SW-T 400, HONDA ST1300PA
Over 20 years of use
We have been using it for over 20 years and have never had a Trouble.
There is an Overhaul opportunity for Engine,
I also had the person who asked me to do the work check the Cylinder,
There were no abnormalities at all.
View detail
Fits: HONDA VTX1800T, HONDA VTX1800N, HONDA VTX1800F, HONDA VTX1800C, HONDA VTX1300T, HONDA VTX1300R, HONDA VTX1300C, HONDA VT750SD, HONDA VT750SA, HONDA VT750S, HONDA VT400S, HONDA VT1300CX, HONDA VT1300CTA, HONDA VT1300CT, HONDA VT1300CS, HONDA VT1300CR, HONDA VFR800FD, HONDA VFR800F, HONDA SW-T 400, HONDA ST1300PA
It feels good to change it.
It is compatible with OEM, so there is no problem at all in use and installation.
It is not expensive, so we replace it with each Oil change, although it does require the time and effort to remove the Filter.
It may be a little overprotective, but …….
However, it would be helpful to change it so I can feel good about my ride and get it at a reasonable price.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
good heated grip
Second time use kijima heated grip. I used gh08 last time and this time gh10. It is quite easy for install and internal switch makes handle bar clean. Highly recommend this heated grip. View detail