Reviews
Oil Temperature Meter
I don't know if it's right, but it's great to know how many times at a glance!
Durability is not yet known.
View detail
The oil filler cap is very convenient to use and decorate
Daytona brand is a famous brand in the production of spare parts for motorbikes from engines to decorations. In particular, the product set of oil cap, reservoir cap and bar ends comes from Daytona premium, I feel the quality is improved compared to normal Daytona. With this set of oil caps, compared to the original cap, I find that it is not only used for decoration with many colors to choose from, but also can be easily opened and closed to make changing the oil easier. With a normal OEM oil cap, I usually spend about 2 to 3 minutes opening and closing the oil cap. With the Daytona oil cap, it only takes 30 seconds to do that. View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
KSR2 is mounted and brightness is OK.
I installed it on my KSR2 and the brightness Level is OK both in Position and in Brake. Other users' impressions were that the brightness became dark, but with the KSR2, I was able to check the brightness even during the daytime and the Level is Large and sturdy.
The LED headlight is more expensive than the Pine Stripe LED headlight, so I can't say that it has superior cost performance, but the product itself is solid and a good product.
KSR is a small battery vehicle, so if you use a lot of electricity such as for an electric tachometer, water temperature gauge, smartphone charging, etc., it is recommended to use LED headlight and tail lamps to secure electricity quickly.
Finally, the packaging has been changed from a box to a thick vinyl package. I am concerned about the packaging of this delicate product if it is not packaged properly for mail order.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Brightness can be secured by attaching to KSR2
I installed it on my KSR2, and the brightness was maintained in both Position and Brake. I have seen some other people's impressions that the brightness became darker, but with the KSR2, the brightness is at a level that can be confirmed even during the daytime.
The price was higher than Matsu Stripe's LED headlight, so I can't say that the cost performance is excellent, but I think the product itself is a good product.
If the vehicle is powered by electric power (e.g., electric tachometer, water temperature gauge, smartphone charging, etc.), we recommend using LED headlight and tail lamps to secure the power.
Finally, the packaging of the product has been changed from boxed to thick vinyl, which is a bit worrisome since it is a Delicate product and if it is not packaged well, I would be concerned.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
There was a Gasoline leak.
Previously, I bought it from another company and it was leaking after about 5 years.
I have been driving MONKEY for about 13 years and this was the third time I had to replace it.
View detail
Fits: その他 , HONDA dachshund, HONDA Shirley 50., HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Dax 70, HONDA Shirley 70, HONDA Mighty Ducks (ST90)
Commonly usable
Blinker relay of 6VMONKEY was broken, so I replaced it with this one. There is no particular problem, but the unique clinking sound of the blinker is gone, which is Minus. View detail
Oil Filler Cap
Changed to Green Light or Gold. View detail
Fits: YAMAHA YSR50, YAMAHA TDR50, YAMAHA Axis, YAMAHA JOG Zr, YAMAHA TZR50, YAMAHA TZR250, YAMAHA TZM50, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, YAMAHA RZ125, YAMAHA RZ50, YAMAHA SDR, YAMAHA RD50, YAMAHA GT50, YAMAHA GT80, YAMAHA JOG, KAWASAKI KS-2, YAMAHA BW's, KAWASAKI KS-1
Slightly modified
Used for TW200 (2JL)
The coils were not in good shape during the restoration, so, well, it's an old bike, and I had to replace them.
The compatibility chart said it would work, but to be honest, it wasn't exactly a poncho.
I had to shave the edges of the plastic on the body, shave off the part where the frame meets the plastic, and sweat.
Maybe it's just my TW, but I managed to get it to work.
Performance Quality is fine.
View detail
good
I think it is worth buying because it can be used for various types of cars!
It would be nice to have one, especially for a 4MINI, as it will be used more often!
View detail
DAYTONAPower advance full digitalcdi and Uotani SP2 compatibility
In my case, the combination of the Utani SP2 and the OEM CDI was not good, and the high RPM was not extended at all compared to the OEMIgnition coil, with the unexpected result that the maximum speed was slower than the OEM.
We thought the cause was that the Ignition coil affected the ignition timing, so we purchased this DAYTONAPower advance full digitalCDI to correct the ignition timing.
As a result, mid- to low-speed acceleration is sharper and the rear tires get hotter under acceleration. The maximum speed is about the same as the OEM CDI.
View detail
Fits: HONDA MONKEY, HONDA DREAM50, HONDA GORILLA, HONDA APE 50, HONDA XR50 MOTARD, HONDA XR100MOTARD
The breather cap is a work of art to look at in it's design and finishes
About quality and texture - The breather cap from SP Takegawa is made from billet aluminium with precision machining and an anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The breather cap is a work of art to look at in it's design and finishes and combined with an oil catch tank has resolved my engine oil loss caused from high RPM riding by allowing the oil vapour generated during this period of riding to be directing back to the engine via the clutch cover. Products to buy together - A key product to buy together with the breather cap is a oil catch tank that will allow for the collection and separation of the oil from the vapour output from the engine. Difficulty of installation - The installation of the breather cap is a simple task that took 0.2 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the breather cap to the clutch cover. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the breather cap is no different. The design of this breather cap with it's rotating barbed hose fitting is what sets it apart from the others. About shipping and packaging - With there being no cost difference between sea freight and EMS for the breather cap, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Monkey 125 but the range is very limited. View detail
C125 is the best choice
I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and the brand Kitako was trustworthy.
You won't feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. -------------------------------------------------- -------- I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and I trusted the brand Kitako. You may not feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. Powered by Google Translator
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Minimoto MONKEY Handlebar Clamp
I purchased this product because I replaced the 6V OEMMONKEYFront fork with a 6V GORILLA, and I wanted to install the HURRICANE Mini condor that was attached to the GORILLA, but I knew that the for MONKEY Top Bridge cannot be attached to the GORILLA's Handlebar Clamp, so I purchased this product. I decided to purchase this product because the position and diameter of the mounting holes of the Top Bridge are different between MONKEY and GORILLA, and the price is reasonable. When I installed the Handlebar Clamp, the position of the Handlebar was about 10mm forward, so I can use it without any problem. View detail
Fits: HONDA GORILLA 6V FNo. Z50J-1300017-1805927, HONDA MONKEY 6V FNo. Z50J-1300017-1805927, HONDA Monkey 6V FNo. Z50J-1300017-1805927, HONDA Gorilla 6V FNo. Z50J-1300017-1805927
K-PIT K-Pit Ignition coil (B)
I purchased and installed this K-PIT for maintenance of my 6V GORILLA. After installation, I checked the ignition of the plug and it sparked perfectly. The original OEM Ignition coil was over 40 years old, so I was worried about its deterioration over time, but this time I bought it and installed it. View detail
It's always this
I always keep it as a spare. It's inexpensive, the quality is good, and it's a standard item. View detail
Genuine DID 420NZ3 Gold Spare Chain Link
I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I bought it just for the color.
I won't know for sure until I ride it for a while, but I bought it just for the color, so I am not particular about its performance. View detail
Fits: HONDA MONKEY, HONDA C50, HONDA C70, HONDA Ape 100, HONDA Ape 50, HONDA cubic series, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Super Cub 90, HONDA dachshund
Oil Temperature Meter for CROSS CUB
Simply remove the oil plug cum Level gauge and replace it with this product.
The temperature-sensing part does not directly enter the oil, but measures the temperature of the scattered oil that adheres to it.
It is not known if the temperature is reliably measured.
View detail
Easy Dress-up
I bought it to replace the rear shock absorber.
One point can be fashionable.
When using this product, the washer that comes with the Rear shock absorber may or may not be used, so it is necessary to read the Instruction Manual.
Rear shock absorber in the photo is SP Mukawa Rear shock absorber Black 06-04-0152
This one product contains 4 Nut.
View detail
It fits neatly!
[How is it used?
I had been using Z50J OEMWiring for about 10 years,
Harness was replaced in consideration of deterioration.
The Engine starts up better.
Was the one you received as per Image?
It was as confirmed by the description on the ManufacturerHP.
Was the installation difficult?
Wiring diagram is included, but because of full-wave rectification,
The connection was made in conjunction with the Wiring diagram from the previous processing.
Only the Connectors on the Regulator are processed.
Wiring around the Headlight is short because of the 3cm LongFrame, though,
The length is the same etc. as OEM.
How was your experience with it?
Meter and Tail lamps are made by Takekawa,
The connection was ready.
We use an external Alarm, but diverted the Harness kit Wiring,
Quantity since OEM:1 Set of 4pcs. could reduce the wiring in the eye photo.
[Included Parts:were they on?
Wiring diagram and Connector for Charger connection are included.
View detail