Reviews
Already the third one.
Every time I change motorcycles, I install a new grip heater, but this heater is the only one I use. The heater remembers the last Level, so it keeps the temperature at the right level. View detail
Good. ??
In my case, I could not install other holders because they interfered with the bracket of the driver's license plate, so I found this product, which is the same size as the Plate, and purchased it immediately.
The License Plate is the same size as the License Plate, so if you do not have enough space to install the License Plate, you can use the "Large" Recommendation!
It is a fairly sturdy Plate-type Holder, so you no longer have to worry about bending the License Plate by catching your foot or Cover. ^o^
View detail
Best in cost performance. This is fine for street riding!
The price is less than 3,000 yen for a sintered pad, but it lasts longer than the OEM pad, and the braking power is different, but it is a type that works at the back, so it has good controllability.
It is not enough for serious driving on circuits and mountain passes, but it is enough for touring pace.
Now that PRO Jectμ's Eco-Sport, which was the most cost-effective Sintered, is gone, this is a valuable Pad to replace it.
I had zero anxiety going down Hakone on the heavy MAJESTY 250 with Tandem.
View detail
Mirror arrived cracked.
The Mirror arrived with a crack.
I didn't return it because I noticed it after I installed one of them.
The box is in the worst possible sticky condition.
I think Design is the best. For a properly managed operation.
I would like it mailed to me.
View detail
Shift PedalRubber replacement
I replaced the old parts with new parts cleaner and screwed them back on with no problem. The fee ring has been changed. View detail
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
Fit like a dedicated Cover!
[How is it used?
Used at home Garage
Was the one you received as per Image?
Almost as shown in the Image, but somewhat flimsy impression
How was your experience with it?
CinderellaFit, as if it were exclusive to CL250!
Size was perfect.
View detail
A little higher up would be cool.
I thought the position would be a little higher, but it is a little lower.
It would be cool if it were a little higher.
Also, it rusts quickly, so it is better to use it with a rust stopper.
View detail
Extension is necessary k ochira no hi
Wiring extension here was necessary, though,
Be careful not to run out of Fuse.
View detail
I did not need the Coil extension.
I didn't need the extension, but I'll leave it in reserve. View detail
Can use
I wish it came with a DrainWasher. View detail
Genuine Yamaha Gaskets for MT07 2020
I wanted to get a few of these for future projects and it just so happened that one of these was also needed for the rebuild job on the MT07 2020 that had an accident and needed sorting out. This gasket was for the water pump to keep it from leaking. Not really a hard part to find as this one like a lot of other gaskets from Yamaha do fit a host of other models. This is why it is good to get more than one when I order from Webike. The part was easy to find using the tools Webike provide in their help sections and then if you like to cross reference, do this via Yamaha schematics. Simple. With a lot of other nuts, bolts, washers and gaskets needed to complete this rebuild, I had a lot of the parts shipped together to save me on shipping cost. When you add a few other parts, it really does work out cheaper in the long run. Also, EMS saves me time by shipping in a efficient manner and gettting my order to me fast. In 5 days from shipping, my order arrived. All my parts were in great shape, no damage caused in transit at all. I am not surprised really as Webike warehouse do a cracking job at packing the orders well. I got 5 of these washers and each came in a Yamaha packet. The gaskets are I think, copper but may be a composite but defintiely have copper in them. These are perfect as copper is a soft metal and will crush down to hold a tight seal. Exactly what you want for a water pump. Very pleased with the purchase and the gaskets are super nicely machined. Great work Webike, thank you. View detail
Wiring is Limit...in a way it fits.
This is the third KIJIMA Grip heater I have installed. The performance and cost performance are excellent, but the distance to the Right and Left Wiring connection points is short, and there is a fuse in that area, so I have to remove the tanketc. to get to it in case of emergency, which is a shortcoming.
The OEM grip for the CL500 is a type without a bar end, and this grip heater is compatible with this type, but this time I installed a Zita bar end plug, which fits well. The smallest part of the supplied throttle fits perfectly.
And when the Grip is aligned with the LeftHandlebar End, there will be a gap of about 3mm at the Handlebar Switch.
View detail
decent product
I purchased it to mount on my Monkey 125. This is an item that makes your bike more luxurious.
Also, since it cannot be removed without tools, you can prepare for any unexpected situation.
Although it doesn't stand out that much, it is a dress-up item that makes the bike stand out.
Very satisfied. -------------------------------------------------- -------- I bought it to mount it in Monkey 125. It is an item that makes the bike more luxurious. You can also prepare for the situation because you can't solve it without a tool. It doesn't work like that, but it's a dress-up item that makes the bike stand out. I am very satisfied. Powered by Google Translator
View detail
Replacement from 3xvOEM Product
While replacing the Ignition coil in 3xv,
I decided to replace the OEM Regulator before it breaks.
Originally, it was easy to stall due to Plug being covered during Idling,
I suspected the ignition system.
Regulator is located behind Rear shock,
I needed a long Hexagonal Wrench for the replacement,
I also removed Seat Cowl,
The fuel tank and air cleaner could be removed and replaced from the top without difficulty.
The product is Blacks than I expected and I installed the terminals on the side without the paint film.
I also sanded and polished the terminals just in case.
It is a little thicker than OEM and Large size, so the original Bolt was not long enough,
A slightly longer Bolt was used to secure it.
There was no Instruction Manual available
My impression is that it was exchanged at the same time as Coil,
Anyway, Idling became stable at 1000~1300 rpm,
I am glad to know that I am not having to worry about CDI or Battery failure.
However, the lack of Torque and jitteriness at startup was not improved!
(It's a 2nd 250, so maybe this is what it's like)
The price is less than half of OEM Product and the quality is better,
I thought it was a pretty good deal.
View detail
TZR3MA'89
Replaced from OEM (old part).
With the new battery, the old part maxed out at 14.1v, but this one goes up to 14.7v even during city driving. It is stable at over 14v while driving. It feels like it is doing its job. We will have to wait and see how durable it is. There are heat resistance measures, so I have high expectations.
I am glad I got a longer Bolt for the fixation because as you said, the fin part of the Bolt is thicker than the fin part.
View detail
Replaced from ragged NORMAL
[How is it used?
In use in exchange for OEMFiller cap from SportsCUB
Was the one you received as per Image?
YES, cut-outs are very beautiful, anodized and even.
Was the installation difficult?
Easy to replace with OEM.
How was your experience with it?
No complaints as it's just for looks.
Level gauge becomes unusable and cannot be turned by hand. (You can turn it around if you try hard enough) Although there are some inconveniences such as
[Included Parts:were they on?
O-rings are included, so there is no need to prepare them separately.
[Was there anything that disappointed you?
None in particular
View detail
Power up when used with Iridium plugs + AS Uotani
[How is it used?
AS Uotani was installed to strengthen the electrical system of YAMAHA XJR400R.
As AS Uotani's Manufacturer, we recommend the use of NGK Iridium Plug and Power cable together, so we recommend the use of NGK Iridium Plug and Power cable together.
We decided to install NGK Iridium Plug and Power cable in addition to AS Uotani.
Was the one you received as per Image?
It was just as Image.
Since there are four cylinders, a total of four bottles are required, so each Quantity of Black and Blue:We purchased 2pcs each.
We decided to make the inside Blue and the outside Black.
Was the installation difficult?
The original method of attaching the OEMCable is to cut the OEMCable and connect the power cable using the included Joint.
This time, however, we connected directly to AS Uotani's IGCoil.
Connection Method:
1:Silicon inside (White color section) Strip 15mm of the plug cord core wire to avoid damaging the
2:Crimp the ConnectorBracket with the Crimp Tool
3:Apply more lubricant to cords and Boots.
4:Cover the Boots
5:Push the ConnectorBracket into the Coil.
How was your experience with it?
Power has increased dramatically, partly due to the use of AS Uotani and NGK Iridium Plug.
Just changing from OEMPlug cord would be quite effective.
[Included Parts:were they on?
Plug cord and Joint, Instruction Manual
[Was there anything that disappointed you?
No special requirements.
View detail
The Cover is perfectly effective even in the rain!
[How is it used?
It is being used on a 2019 Z900.
Purchase Size is LL. usually kept on the only rear.Maintenance Stand is hung.
Was the one you received as per Image?
It is thicker than Image, and my expectations were high that it would be very effective as a Cover the moment I picked it up.
I used to use a non-WaterRegisterance product from the company Cover, but the thickness is noticeably different from that.
How was your experience with it?
I hung the Cover as soon as I received it, and it blocks the sunlight normally without any problems on sunny days.
We were lucky enough to have rain the next two days, so we checked the effect on the car body after the rain stopped, but there was no effect at all inside, and the Waterproof performance was well demonstrated.
Also, since the LLSize is relatively large, even if the maintenance stand was applied to make it taller, it would cover the bottom so that the Wheel would not stick out and get dirty.
The center is also equipped with a belt, so the Cover does not flap around and protects the vehicle body.
[Points to note]
It may or may not be important to note that the Heat Seat can be applied to the area where the Exhaust System hits, but it will not be effective at all if it is applied to the right place, so we recommend that you check the location carefully before applying it.
How did it compare to other products?
The price is higher than the regular Cover made by the company, but considering the waterproof aspect, I think I will repeat this in the future.
What is the rest of the useful life? I guess.
View detail
Fits: DUCATI 1299PANIGALE S, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI MONSTER1200S, DUCATI MONSTER1200, DUCATI MONSTER1100EVO, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER696, DUCATI MONSTER796, YAMAHA TRICITY125, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA MT-09 TRACER, YAMAHA RZ50, YAMAHA TMAX530, YAMAHA R1-Z
Daytona oil cap
I'm used on honda hornet 250.Good look.perfectly fitted to the oil cap thread.There are small holes for water drain top of the cap.if you need open of close need to use alen key as a tool.recomended for bike enthusiast. View detail