License Plate bend prevention

Before I installed the License Plate Base, I used to catch my pants and bend them, but since I installed the License Plate Base, I haven't had any problems. View detail

Simple is Best!

It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect. View detail

Necessary and sufficient

Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number. View detail

Number Protection

I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy. View detail

Genuine Puig Hi-Tech Racing Grips

These grips were purchased for a customer who wanted a little more bling on their bike. The copper colour was the one they wanted. Searching Webike and found these fairly easily and at a better cost than I could source locally. With a few other small parts already in my basket, I got all shipped with my chosen courier which is of course EMS. They just get the orders delivered fast and I mean fast. Thsi all arrived in 5 days from being shipped which you cannot argue about. The grips themselves came in the standard Puig packet/box and were also covered in bubble wrap to keep them safe. The colour is more true to a copper than I would say orange but as it happened, this worked perfectly with the colour scheme of the bike anyway, win win. I personally have never tried this style of grips but once fitted, they do feel alright. I have to say though, the finish and quality of these are absolutely awesome. Really good CNC work on them and the grip part is super grippy so no issue with slippage. The customer is very pleased so thanks Webike, nice one. View detail

The XG250 TRICKER has a slightly smaller take-up diameter than the OEM.

Purchased for installation of hand guard to be fixed to Bar End.
I installed it on my XG250 TRICKER and the take-up diameter is a little smaller than OEM.
I felt no discomfort when I rode it.
It was easy to open end for now, so that was helpful. View detail

Hey!

Contact Person!
I thought I sent you an email telling you to Cancel! View detail

Useful for cold season commuting

[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem. View detail

Required for Northeast Number.

The grip is so thin and natural that you don't even notice it has been replaced. View detail

I am very grateful for this season!

My other car is equipped with a Grip Seater at Standard Equipment, and in the middle of winter, I have been benefiting from it, so I installed it on SecondMotorcycle as well.
As a result, WW could be a little warmer.
I guess the performance is a consideration for Battery capacity, etc., but if I had my wish, I would prefer a little more warmth...
The product looks and feels completely comfortable to hold.

Having said that, I have been able to spend this winter more comfortably than if I had nothing on! View detail

For the price ….

I bought this because I changed the front and rear Calipers to Gold and wanted to have a consistent color.
Well, I believe it is less likely to deteriorate because of that….
Matching with GoldCaliper was a disappointment. I still think it would have been better to leave it in Black. View detail

Thick and solid product

It is the same size as the Number, so it is not suitable for those who want to dress-up the outer frame of the Number, but I think it is an excellent choice for those who do not want to bend the Number. It is thick and the texture is not bad. View detail

More than I expected…

I bought it for winter touring because I had some points left over and there was a discount campaign going on.
I can do electrical work and have replaced grips before, so I installed it myself.
Installation was easier than I expected, but it is safer to ask a store to do it if you are worried about the force required to press-fit the grips.
The key heat is effective at Plus temperatures, but not so effective at Minus temperatures. Well, it is better than nothing.
I have a Honda 400X with Honda OEM hand guard, so it is not directly exposed to wind, but even so, the effect starts to diminish from about 3 degrees Celsius.
It is better than nothing, but when I experienced HondaOEM's Grip heater on the 400X I rented from LenBarrel at HondaDREAM before, it was so hot that I could not grip it even at high speed in the morning in the middle of winter, and 2 out of 3 levels was enough.
This product does not get that hot even at max. 5 levels.
It seems that the temperature differs depending on the Manufacturer, and KIJIMA-made products seem to be lower than those of other Manufacturers.
Power is supplied from Honda OEM power supply coupler ACC.
However, the grip is very good, so I will give it an overall rating of 3.

Good points:comfortable grip and easy to install.
Five levels allow for detailed settings depending on the situation.

The bad:Not as hot as expected. View detail

On a 2011 CBR600RR.

I bought it because I didn't want to do thick Gloves in the winter.
The installation was done by Webike's Support store with direct shipping.
In the case of the CBR600RR, I gave up on it myself because it is Large strange to remove the FI side of the Accelerator Wire.
I have used it and it heats up so much that it is hot at the strongest Level.
My wish to use thin Gloves in winter was fulfilled as long as I warmed the back side of my hand from time to time.
There is no possibility of mishandling during Blinker operation. View detail

easily control the throttle

I replaced the old grip on my Suzuki Hayabusa with Kijima grip rubber. The grip is soft and resilent I can easily control the throttle. Hight quality and good price compared to performance. View detail

Grip heater refill

I installed a replacement GH-10 that I had been using for 2 years, but it stopped working and during a Sale.
I was thinking of using something different, something made by DAYTONA or something with a separate controller, but I chose the GH-10 again because I thought the convenience of being able to operate it with a short push at hand could not be compensated for by the difference in price.
The Axel side is easy to install since it is integrated with the Throttle cone. The opposite side is difficult to install unless it is warmed up. Wiring is done by floating the Headlight in the back gap. It's still useful to have it from a little chilly season to winter. View detail

Add on to Clamp on heated grips

Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips! I have good luck with most all webike products. I purchased 1 of these along with the associated heated lock grips for my wife's and my bikes. Installation was straight forward after watching the videos. Just had a chance to try them out over winter break with temps around 10C - 15C. They took a few minutes to warm up, but did a great job. We typically started on a setting of 2 - 3, then turned them off after our riding activity increased. Very warm, even through our winter gloves. Great purchase, happy wife!Would recommend! Fast shipping as always too.Thank you Webike. View detail

Easy to install, better than ManufacturerOEM

The switch is integrated with the grips for easy installation, requiring only wiring and no effort.
It is also possible to point it straight up to avoid touching it when operating the blinker. If you warm up the Heater to the maximum Large setting, you can easily pull out the Grip.
The thickness is just right for general OEMSize and is a non-slip Material. View detail

very good. This is excellent in finish and quality

There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful I'm willing to install it on my other bike. View detail

Already the third one.

Every time I change motorcycles, I install a new grip heater, but this heater is the only one I use. The heater remembers the last Level, so it keeps the temperature at the right level. View detail