Reviews
Fits: YAMAHA XT600E, YAMAHA XT400, YAMAHA XS400, YAMAHA YZ125, YAMAHA XJ650, YAMAHA XJ650, YAMAHA XJ400, YAMAHA XJ400, YAMAHA YZ80, YAMAHA YZ80, YAMAHA XJ750E, YAMAHA MAJESTY250(SG03J), YAMAHA BRONCO, YAMAHA TY250Z TY250, YAMAHA FZR750R(OW-01), YAMAHA YZ125, YAMAHA YZ250, YAMAHA XZ550, YAMAHA XTZ750 SUPERTENERE, YAMAHA XT660Z TENERE
Refresh with the acquisition of vehicle inspection
The brake lever of the SR was broken, and I thought I would fix it when I inspected the car, so I bought it to renew the Left Side anyway.
The Specifications are the same as OEM and the grip is fine.
The price is not so high, and it may be possible to put it under Seat as for Repair.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Grom Plug cord replacement
Simultaneous replacement to replace the plug
OEMPlug cord with Cut and attached Joint
Just connect it, but depending on where you cut the cord
In the case of the Grom, the exterior must be removed.
Joint, but if you can see it, do not remove the exterior.
It can be installed. There are various code colors.
The NGKMark on the plug cap gives a Custom look.
The color was not attached, so I inked it with Touch up.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
good material, hopefull can used for long lasting View detail
Fits: YAMAHA VIRAGO750, YAMAHA VIRAGO1100, YAMAHA DRAGSTAR1100Classic, YAMAHA DRAGSTAR1100, YAMAHA DIVERSION900, YAMAHA YZF750SP, YAMAHA YZF600 THUNDER CAT, YAMAHA YZF1000 THUNDER ACE, YAMAHA YD250, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1200R, YAMAHA XJR1200, YAMAHA XJR1200, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XJ750D, YAMAHA XJ400, YAMAHA XJ400, YAMAHA V-MAX 1200
Seems good.
I bought the Pad that came with my used Caliper at Restore because it was low on the Pad that came with it.
The brake of the Rear NORMAL was not effective, so I introduced a Barrel Type Rotor and the effect improved, but the control was sudden, so I wanted something that could be controlled without anxiety, so I decided on this product.
I'm sorry I can't compare it to the first one I had installed because I'm not sure what kind of Sports pad it was, but I'll give you an Impression of the current Pad.
It seems sweet at first. But the control area is wider, so I think it's good. The effect at the back is the same as the previous Pad.
I thought it would be better if I did Caliper's Overhaul. For now, I'm only doing the firestorm and Brake fluid replacement.
The rest of the Rotor's aggression and wear resistance will not be known until you use it and go years.
It was a Campaign, so I was a bit excited about it.
View detail
Fits: HONDA Hornet 250, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI ZRX400, KAWASAKI ZXR750, KTM 1190 RC8R, KTM 1190 RC8R, SUZUKI B-KING, YAMAHA FZ6-S Feather, YAMAHA FZS1000 Feather, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XJR1300, KTM 1190 RC8, SUZUKI GSX400, KAWASAKI ZX-9R, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, KAWASAKI ZZR400
Light extension to high rpm
I've had my eye on this for a while, but bought it in time for Campaign.
Easy to install, just insert it into the Blowby gasHose. (Just be careful about the direction.)
I could feel the effect immediately.
I wonder if the decompression is working or not, the extension from mid RPM to high RPM is obviously smoother. It's very light to blow up.
It feels very good, like the resistance is decreasing. I am satisfied with this.
It also looks flashy and custom, which adds to the sense of ownership.
It's not cheap, but I recommend it.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
It's not much, but it's up
I used to ride it without replacement, but it doesn't feel good in high humidity
I could have used a standard one, but I just went with it The installation went well with no problem
It's amazing It has changed like a different vehicle (Maybe it was originally Warsugi?)
It's only one piece of tubing and cap, so you don't have to worry about water proofing it
Plus, STDCoil replacement and blow-by removal for more power!
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Stable plug cord!
ZEPHYR750's OEM plug cord was broken and replaced with an NGKPower cable I did
I machined and installed the OEM code Coupler without using an intermediate joint
Compared to the OEMs, the NGK code was thicker and the outer rolls had to be cut down It should have been possible to hold it well on the housing side, but the processing failed and the I reinforced it with SiliconBond to complete it
You can reduce the time and effort by using the intermediate joints The Cable color is Color:Choose Yellow Personally, I'm happy with Match to ZEPHYR
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
NGK Quality
Since the OEM plug cord was found to deteriorate due to the Ka Chica Chi, it was also used for fashion Replacement
7mm to 8mm thick
Disconnect from the end of the Coil and connect to the new Cable using a Joint
Very easy and simple!
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
If you change the plug, you can change the code
It's easy to install! Just screw it in and tighten with Tie Wrap
It's all in black, so the code is also in black
No change in appearance, but I could feel the stability of Idling
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
NGK Power Cable
Hello Webike! I bought this wonderful power cable as a replacement for the original old cable. The old power cable was not working well and the moped jerked while riding. This cable is made of soft silicone and the spark plug fits very tightly on the spark plug. This cap is designed for a candle with a metal tip, which is included in the kit. The power cable turned out to be thicker than the original Honda Super Cub C50 fi, so there were minor problems when installing it into the ignition coil. Thank you Webike for an excellent product and a good attitude towards the buyer! Hi Webike! I bought this wonderful power cable in exchange for the original old cable. The old power cable did not work well and the moped twitched while riding. This cable is made of soft silicone, the candle cap sits very tightly on the spark plug. This cap is designed for a candle with a metal tip, which is included in the kit. The power cable turned out to be thicker than the original Honda Super Cub C50 fi, so there were some problems when installing it in the ignition coil. Thanks to Webike for the great product and good customer attitude! translated by Google Translator View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Use with iridium plug CD50 Benly
my engine is 118cc bore up feels really fast response stroke and less viberation in high RPM you must use less resist ignition cable and iridium plug View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Honda C70 NGK Power Cable
Product arrived ingood condition. Immediately installed the power cable according to the instructions attached. Tested the power cable after install and functioning well. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
My Honda C70 NGK Power Cable
Product received in good condition and nice packaging. Installed the power cable to my Honda C70 by following the attached instruction. The power cable helps the spark plug to produce strong spark for better combustion. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Spark plug cable for Van Van RV 200 2016
Really cool cable Easy to assemble thanks to simple instructions, paired with an iridium candle Price, shipping and delivery time ok 26% customs duties (translated by Google Translator) View detail
Fits: HONDA Hornet 250, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI ZRX400, KAWASAKI ZXR750, KTM 1190 RC8R, KTM 1190 RC8R, SUZUKI B-KING, YAMAHA FZ6-S Feather, YAMAHA FZS1000 Feather, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XJR1300, KTM 1190 RC8, SUZUKI GSX400, KAWASAKI ZX-9R, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, KAWASAKI ZZR400
It got easier to ride
Is T-rev a Cost to that effect match? It is an unexpected part when introducing it.
As Impressions, it is about relaxing the feeling of geeky feeling at the time of low speed, whether Torque's way out is Mild and whether the rise has become slightly lighter.
I think that it is okay right after wearing it, but as soon as it gets accustomed, how about whether to suit Cost. However, it will be easy to ride reliably.
In case of me you are assembling with αSystem not set in ZEPHYR 750. It was that it got more effect.
By removing the Air cleaner box, I usually bite the Breather Hose 650 mm 6 mm Diameter, but I consulted with Teramoto car and combined various finer parts and tried and assembled together.
Since my FCR Carburetor Body is Short Spigot, the Oris feeler 's Breather Outlet Port was forced to forcibly forcibly because there was little acceleration pump and Oil cap part' s Clearance, but at some time Parts that can take out Breather diagonally from Shop 's people I got introduced and it settled in the present form.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
NGK spark plug wires
Silicone spark plug cable from NGK. The cable is silicone. Soft and can be positioned for easy installation. The cable that comes with it is quite long. And it also comes with a good topic. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
I think it's good..
I purchased it together with Iridium plugs as part of Maintenance. For OEM code 7φ, this product is 8φ, so we attached the code after processing.
I did not expect any effects or sensory things, so I wanted to replace before Trouble occurred, so I exchanged it.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
After all NGK
Previously I used Posh 's thing, but unfortunately the gold in the part to plug in the plug was crashed and replaced. This time I made it to NGK. Since this Cable has been used for other Motorcycle before, it is safe. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Torque feeling improved in old motorcycle too.
? 【What made you decide the purchase?】
Reliable Brand's NGK. Plug is also NGK so I think that compatibility is also Large.
? 【How was it actually used?】
Motorcycle is old, I feel that Torque has improved in general. Power comes with Axel.
? 【Was it difficult to install? (Hard parts case)】
Work to uninstall Tank and Radiator to remove Ignition coil was quite troublesome. Once you remove the Ignition coil, the code installation work is relatively easy.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
I straightened this cable from the root of the OEM's Plug cord from the Ignition coil, so I had the power to screw it into the Ignition coil because it was thicker than the OEM code.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?]
There is no particular problem.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I would like you to match the thickness of the approximate OEMPlug cord.
? 【Have you compared items?】
Norogy's Hot wire
? [Others]
Confirmation and adjustment are necessary so that the amount of Oil and the amount of fuel do not become thin as much as the combustion efficiency improves.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
I felt there was more effect than price!
It took the Engine to the KICK 2 or 3 times, but after mounting it was almost one shot ok became the most effective!
I could not really feel the effect like the item description of Others, but I feel like I'm feeling somewhat better with a feeling of being?
Afterwards, the appearance is exchanged in any way It is good that the feeling is strong.
Strictly speaking, if you cut the OEM code according to the instructions, the position of the Connecting Connector will be in a difficult position to restore, so I thought that it would be better to do it in the field.
View detail