Reviews
very good. This is excellent in finish and quality
There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful I'm willing to install it on my other bike. View detail
Usable as usual
The price is cheaper than OEMetc., though it is a part that is not often replaced. View detail
Genuine Yamaha O-Ring for FJR1300 2018
I was doing some maintenance on this bike and noticed a small leak from the oil cooler. After some investigation I found that one of the 2 o-rings on the joint was perishing and was not holding as it should. No problem. I checked Webike help pages and got the links to the Yamaha schematics for this model. The part was pretty straight forward to find and does fit a few models anyway. Webike price was excellent as always and so I got a new set of 2 and a couple of spares to save. No point is scrimping and just buying the one as at some point, the other o-ring would need replacing anyway. With a couple of other parts in my basket, I got them all shipped together via EMS and the order was delivered quickly in 5 days from shipping. The o-rings were in teh standar Yamaha packets and inside a small bubble wrap envelope. Yes, they are just o-rings but these o-rings need to work as they should in order to make a good seal from the joints. This was their purpose and that is exactly what they did. They had a lot of flex but that was not a problem as they seated in just the one placement anyway. Job done, no leak, very happy customer. Thanks Webike. View detail
Already the third one.
Every time I change motorcycles, I install a new grip heater, but this heater is the only one I use. The heater remembers the last Level, so it keeps the temperature at the right level. View detail
Genuine Yamaha Cotter Valve for FZ1 2006
I was doing a full valve rebuild on this FZ1N 2006 and needed the cotter valves as I did not have these is my garage. I did struggle to find the parts actually available locally so I decided to get them from Webike. I found the parts pretty easily as I already knew the other parts needed and had a schematic for the rest. The price Webike had these for was really good value. With a few other parts in my order, all the items were shipped together with EMS and arrived in perfect condition in 5 days. The packages were all individually packed in Yamaha envelopes and stapled together so I did not lose any in the box. The valves are really small parts and can become damaged if not well protected during transit. Webike have this part spot on, very well packed out with padding. The valves themselves are brilliant quality and you can see this from the machine work that has gone into them. Crisp and clean and no weird shards of swarf on them at all. Just got to get around to fitting this all in with a busy schedule now. Very pleased with the purchase for the 4 cotter valves. View detail
Genuine Yamaha Diapragm Reservoir Gasket for FZ8 2012
The old reservoir diaphragm was not in the greatest of condition when checking the fluid for maintenance. There was a noticible split in part of it and this is no doubt why the braking was useless on this bike. I was not going to leave it like that so decided to get a brand new one from Webike. The part was easy to find using the tools Webike provide and cross referencing with Yamaha schemaics for my own assurance. The price was excellent and better than I could surce locally. Shipped with EMS all my parts arrived in 5 days from shipping. The diaphragm came in teh usual Yamaha packet and aslo inside a bubble wrap encelope for safety. The diaphragm itself is a lovely moulded piece. Very supple and maliable which is of course needed to cope with the constant preseures of the brake fluid. Not too hard to fit as it is just a straight swap out. Now all back together, the brakes now work as they should. Give it a week and I will also bleed the brakes again. Great job, thank you so much Webike, happy customer. View detail
Genuine Yamaha Front Brake Reservoir Cover for MT10 2019
The front brake reservoir cover had gotten a little bit worn and did not look good for my liking so I decided I would just go ahead and change this for a stock OEM Yamaha one. The correct parts was found using the tools Webike provide and cross referencing with Yamaha's own schematics. The price Webike had this for was excellent and better than I could source locally. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. My parts were well packed and no damage was sustained during transit. The reservoir cover that was on the bike had gotten a little worn and messed up but this now looks absolutely stunning and make the bike now look a lot better. I also purchased a brand new front brake reservoir cover screws too so the job got done correctly. All works a treat. Very pleased with this purchase and my others in this order, thank you Webike, exceptional work guys as always. View detail
Parenthesis good!
Since the resin products are combined with each other, the assembly of the three One Side products, including the drilling process, must be done gradually and evenly, etc.
The nut on the upper side of the drilled hole is small in relation to the hole diameter, and since it is made of resin, it is better to use a washer to tighten the nut.
If you take care of that, it will fit Exactly, and the finish is Magical quality and perfect.
I am pleased with how well it matches the body of the car, which was repainted in Black Meta.
View detail
Genuine Yamaha Front Brake Reservoir Cover for MT10 2019
The front brake reservoir cover had gotten a little bit worn and did not look good for my liking so I decided I would just go ahead and change this for a stock OEM Yamaha one. The correct parts was found using the tools Webike provide and cross referencing with Yamaha's own schematics. The price Webike had this for was excellent and better than I could source locally. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. My parts were well packed and no damage was sustained during transit. The reservoir cover that was on the bike had gotten a little worn and messed up but this now looks absolutely stunning and make the bike now look a lot better. I also purchased a brand new front brake reservoir cover screws too so the job got done correctly. All works a treat. Very pleased with this purchase and my others in this order, thank you Webike, exceptional work guys as always. View detail
Can be installed as per Instruction Manual
I wanted a RearCase for my FZ1, and when I searched for one, I found either Hepco or GIVI, but GIVI requires a little modification to the cowl, so I chose Hepco, which I was told can be popped on.
The delivery time after placing the order was about a month. This is as advertised, but I think they probably ordered it from Germany.
The Carrier's bar was sticking out of the step ball when it arrived, which was not acceptable, but there was no damage, so I installed it as is.
I don't need Special Tool, but it is surprising that I needed 13mm Spanner. It is a size that is not often used.
The only part that was a bit difficult was removing the pin that holds the Tandem Footpeg. I managed to remove it by making full use of the radio pliers and pliers I had on hand.
The Instruction Manual is only available in English Version and in German, but there is a PDF version of the Manual on the ManufacturerSite, so if you download it and write a translation, you can see the translation (you can see it by typing here, but it's not that difficult). It is not in English version, so I think you can read it as it is.
If you are a beginner, it is better to work with two people. One person could hold the Carrier and one person could tighten the Bolt.
The accuracy of the parts was fine and came on Beauty. There was no particularly bad Gap or Bolt not closing.
As a precaution, when attaching the mounting plate of the Case, there were cases in which the Plate lid would not fit depending on the position of the Bolt, so it is like looking for the position of the Bolt while thinking about how to close the lid.
If the Bolt is not oriented as per the Instruction Manual, the tool will hit the Body, use a Spanner where the Wrench will not fit, etc.
View detail
OEM exchange
I purchased a car with no replacement history, so I thought it was a delivery maintenance.
It is OEM, so no problem!
View detail
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
Size was not suitable for CBR1000RR-R.
[How is it used?
It is used in a covered outdoor parking lot.
I am using it on a CBR1000RR-R, which is listed as a compatible model, but the size is too large.
I think it is also due to the fact that I am using Mirror in a folded state, but the excess part of the Cover contacts the ground quite a bit.
Due to the nature of the product, many people will use it outdoors, but the Cover will stick to the ground when it rains.
[Points to note]
If you are thinking of using it on CBR1000RR-R, we recommend you to buy 1Size or 2SizeSmallest one.
View detail
Genuine Yamaha Gaskets for MT07 2020
I wanted to get a few of these for future projects and it just so happened that one of these was also needed for the rebuild job on the MT07 2020 that had an accident and needed sorting out. This gasket was for the water pump to keep it from leaking. Not really a hard part to find as this one like a lot of other gaskets from Yamaha do fit a host of other models. This is why it is good to get more than one when I order from Webike. The part was easy to find using the tools Webike provide in their help sections and then if you like to cross reference, do this via Yamaha schematics. Simple. With a lot of other nuts, bolts, washers and gaskets needed to complete this rebuild, I had a lot of the parts shipped together to save me on shipping cost. When you add a few other parts, it really does work out cheaper in the long run. Also, EMS saves me time by shipping in a efficient manner and gettting my order to me fast. In 5 days from shipping, my order arrived. All my parts were in great shape, no damage caused in transit at all. I am not surprised really as Webike warehouse do a cracking job at packing the orders well. I got 5 of these washers and each came in a Yamaha packet. The gaskets are I think, copper but may be a composite but defintiely have copper in them. These are perfect as copper is a soft metal and will crush down to hold a tight seal. Exactly what you want for a water pump. Very pleased with the purchase and the gaskets are super nicely machined. Great work Webike, thank you. View detail
Wiring is Limit...in a way it fits.
This is the third KIJIMA Grip heater I have installed. The performance and cost performance are excellent, but the distance to the Right and Left Wiring connection points is short, and there is a fuse in that area, so I have to remove the tanketc. to get to it in case of emergency, which is a shortcoming.
The OEM grip for the CL500 is a type without a bar end, and this grip heater is compatible with this type, but this time I installed a Zita bar end plug, which fits well. The smallest part of the supplied throttle fits perfectly.
And when the Grip is aligned with the LeftHandlebar End, there will be a gap of about 3mm at the Handlebar Switch.
View detail
Installation is not quite right
I didn't like the OEM's tactile Mirror so I replaced it. As a result, I am satisfied with the new Mirror because it is easier to see the back of the car and looks better than the OEM Mirror. The installation was not so easy to understand. View detail
Engine might be good ?
This is the first time I tried the Racing plug.
I heard it's Life good.
First of all, the engine starts well. When I lightly stirred the Axel, it seems to turn a little lightly.
I'm looking forward to running the car at full throttle during the next Sports run.
View detail
Power up with AS Uotani
[How is it used?
AS Uotani was installed to strengthen the electrical system of YAMAHA XJR400R.
As AS Uotani's Manufacturer, we recommend the use of NGK Iridium Plug and Power cable together, so we recommend the use of NGK Iridium Plug and Power cable together.
We decided to install NGK Iridium Plug and Power cable in addition to AS Uotani.
Was the one you received as per Image?
It was just as Image.
Since there are four cylinders, a total of four bottles are required.
The price is about 1.5 times that of NORMAL, but the quality is quite good.
Was the installation difficult?
Installation is easy, as it is the same as for a regular Plug.
Gap was adjusted from 0.8mm to 1.1mm for use with AS Uotani.
How was your experience with it?
Power has increased dramatically, partly due to the use of AS Uotani and NGKPower cables together.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
No special requirements.
View detail
Very controllable, normal effect
Used with brembo's RACINGdisc for city driving.
This is the second time I bought this Pad. The first Pad I bought is not very durable as the replacement Timing is reduced after about 10000km.
It has a Semi Metal-like appearance, but it seems to be of Organic type, and the Touch is very soft.
It is not a gutsy Type, so people who are used to such Pad may get the impression that it does not work.
The effect rises Linearly to the Lever input, so it should be very easy to use for those who can hold it tightly.
However, when used at ultra-high speeds such as Circuit, it seems to be a little insufficient, and when used at hard braking above a certain Level, the linear sensation fades away, and the Image does not work as well as it was gripped.
However, since it does not work in vain, I can grip it with all my might, and if you are an amateur like me, you can improve your Time........
It remains Controllable to the end because it does not reach such a Level in city driving, and it is very easy to use both in the Grip and Release directions.
It is also very stable from low to high temperatures, and the feel does not change much whether it is the first shot in midwinter or a hard brake in mid-summer.
Looks like Metal pad.
But there is no hard Touch and no gurgling feeling like the Metal pad, but always soft Touch.
Organic and common in the Organic system. The rain changes the effect drastically. The control is as good as in Dry, which is wonderful.
It is not a type that works with a bang as soon as you grip it, and there is no firmness, so you may have different tastes, but it is very easy to use.
View detail
Unsatisfied with the color
Other manufacturers did not have Steel as an option, and even if they did, the price was more than twice as high, so I ordered this one.
I kept looking forward to it, waited for 3 months, and finally the product arrived.
I wanted the iron-colored Silver, but what I received was Black.
Some lots may be Black." But it's fatal to leave the color to chance when you're choosing it for custom as well.
Maybe flush or poach without mounting.
I haven't used it, so I don't know how it's used.
View detail