Reviews
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR
Effective in reducing Rear sinking
Even if the sag is adjusted, when the load is applied at circuit level, the rear end sinks and the car turns weakly in the secondary turn, so dampers are necessary. I purchased the 4RR exclusive product because it was available this time. The most Large 3.5cm height of Rear is raised. 。 Since the frame position will be relatively higher, it is safe to raise the frame up to 2 cm, since it will lean more deeply when parked on the side stand. View detail
Very useful. The eye crush? I was a little concerned about the
It's all in All-in-One, which is very convenient.
We try to change everything every time.
View detail
To the OH of SEROW.
I bought it because it is cheap, around OH above the waist of SEROW. Don't forget about Valve compound. View detail
For my first SMARTRideMonitor.
I installed it because the slight vibration of the Motorcycle was affecting the Camera function of my phone (iPhone11Pro).
We wanted to keep Wiring simple, so we chose the Type without the drareco function.
The kit comes with a variety of brackets for installation, so I think it can be used on most large vehicles. I used the base of the RAM Mount that I originally used, so I was able to install it without any extra work.
Wiring is only required to connect to the Plus and Minus terminals of the battery and to the ACC power supply.
Both WiFi and Bluetooth connect without any problems or glitches.
It is not particularly difficult to see even under bright sunlight during the day. I expect that it will be visible even in the midsummer sun.
The downside is that other WiFi-based devices will not work. I tried to remotely control my insta360 from my phone and couldn't do it.
As a supplement, when you register as a User, you will be directed to a dedicated line for inquiries and they will respond to your detailed questions. I was lost in Wiring myself, but they were very polite and helpful.
View detail
Required for OH above the waist
Used for Valve matching. This is a task that is rarely done, so I am thankful for this Size. (Even this Size will probably never run out.) View detail
Fits: KTM RC250, KTM RC390, KTM DUKE250, KTM DUKE390, YAMAHA MT-25, YAMAHA MT-03, YAMAHA NMAX, YAMAHA YZF-R3, YAMAHA YZF-R25
Effective in vibration reduction
It is a Single Body and quite heavy. It is certainly effective in reducing vibration. View detail
Replace OEMHandlebar
Separate Handlebars are too aggressive; Swallow handle is too short
Therefore, it becomes Condor Handle.
However, in the reverse position (where the Grip is lower than the Clamp), there is too little Clearance between the bar and the Blinker.
View detail
Fits: KAWASAKI Z900, KAWASAKI Ninja1000SX, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Core guard with a good, understated claim!
Easy to install! Very good product in color and design! View detail
Used with Continental handle
I bought a Chromeplating type.
Short Type is suitable for going through narrow places. I have a Continental handle and the rearward visibility is good for a Short Type. I think the blurring that everyone is concerned about is at a practical level even at high speeds.
I've driven about 200 km, mostly down the road, and it was comfortable.
I don't know yet if it is resistant or weak to Rust. I think this kind of plating mirror needs to be cleaned frequently because it rusts easily if left unattended.
View detail
Installed on ADV160
Installed on ADV160.
We knew the effect of Universal's One-Way Valve on CROSSCUB110, but we wondered how it would work on Scooter and tried to install it.
The CUB was more noticeable in the reduction of the embitterment, the revs were lighter at higher RPMs, and fuel economy is yet to be seen.
In general, the CUB was more hesitant to show its effects.
Installation on the ADV160 can be done by hand through the gap, so it should take no more than 10 minutes.
View detail
Fits: HONDA glom
Replacement of DAYTONA Screen
I was planning to replace the DAYTONA Screen I had installed on my DIO110 with a new one for my GROM, and I came across a site that had repair parts for the GROM bracket. I placed an order and was able to install it! 。 However, this product and DAYTONA91450 Bracket Set are required. Also, there is no instruction manual, so please refer to YouTube etc. View detail
First time security products
I was not sure which security device to use for my first motorcycle, but I found it convenient to use only one key to unlock the lock, so I bought it. I thought it would be a better product if both the Chain and U-shaped Lock had a buffer material that could be moved where it meets the wheel. View detail
Sunstar Chain and Sprocket
Paired this together with the SUNSTAR Chain 520 Gold and Rear Sprocket Duralumin. Its better than the stock. Riding felt different when installed View detail
Tire and road surface conditions can be monitored through the butt
[How is it used?
Sports driving on mini circuits 80%, open road 20%.
Was the one you received as per Image?
Gel Coating. [Color] Used as is without blowing Clear, no problems
How was your experience with it?
Good Fee Ring in Mini circuit
[Points to note]
On public roads, the vibration will (of course) come to the buttocks, and with Gap, etc., be careful because it will hit your cervical vertebrae!
How did it compare to other products?
No comparative products were available.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I think the size of Seat rubber is too small.......
View detail
ExactSize to Seat
I purchased a Mesh Seat cover to keep my Seat from getting too hot.
Seat size is EXACTLY the same!
I don't know if it depends on the fabric of the pants, but when I put on the braces, my buttocks slide forward.
View detail
Extensions are useful
I used it for about 2000 km. I also drove about 200 km in the pouring rain. It was easy to install and the included Rain Cover did a great job of keeping the rain out. I put the things I really didn't want to get wet in the WaterproofBack and put them in this backpack, but I didn't need it. The four point fastening system is very secure. If you are not sure, you can add a binding string to the backpack, but unlike a hard case, if the contents are not tightly packed, the back will distort when strapped to the motorcycle and the string will loosen. Fastener and buckle are strong and show no sign of breaking. I got hit by a rocket once, but the back was fine, and the motorcycle was almost unscathed thanks to the back. It is really strong. View detail
Impressions after 100 km of use
The Rear Disc had reached the end of its useful life and was to be replaced with a new one, so the Pad was also replaced accordingly.
I tried using the pad without pad grease and without beveling the pad surface to get an idea of the pad's performance, but it did not squeal.
It did not work well until it hit, but once it hit, it worked well.
When the hit is applied, it works in proportion to the force of the step, so it is very easy to control the Brake.
I don't know about durability as I just started using it, so I will give it 3 stars.
View detail
It was not as noticeable as I thought it would be.
I was looking for a Slider on the Engine side and installed it after standing on it once, I thought it would be up to the Guard pipe, but the actual Slider is not very noticeable and seems to work in case of an emergency.
I used WeBigPit InService for the installation, but it looked Larger than I expected and it was impossible to do it by myself. It was the right choice.
View detail
Convenient to have
It can also measure depth, which is very useful to have.
The movement is a little stiff, but I think it is appropriate for the price.
View detail
Trust and Security
[How is it used?
For box mounting
Was the one you received as per Image?
Same as for other car models.
It's solid
Was the installation difficult?
It may be easy or difficult, depending on the type of car,
For W800, the difficulty level would be about "medium".
How was your experience with it?
The firmness of the product is far superior to other companies' products.
There is a sense of security when the Box is attached.
The only concern is that the top surface of the Carrier is one step higher than the Seat Surface.
If possible, I wanted it to be truer like KawasakiOEM.
[Included Parts:were they on?
Spaceretc. and everything necessary for installation is included.
View detail