Reviews
Fits: SUZUKI ADDRESS110, SUZUKI V-STROM250, SUZUKI GSX250R, KAWASAKI VULCAN900Classic, KAWASAKI VULCAN900Custom, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA CBF125, HONDA CB125F, SUZUKI Address125, SUZUKI Gixxer, SUZUKI swish, SUZUKI Swish LIMITED, YAMAHA BOLT, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA GRIZZLY700FI, YAMAHA SCR950, YAMAHA GRAND MAJESTY, YAMAHA MAJESTY250
NGK IRIDIUM is the best spark plug for the Honda Grom
These NGK IRIDIUM are simply the best spark plug for the Honda Grom! The NGK CPR7EAIX-9S IRIDIUM spark plug is a cooler plug than the OEM version that comes on the Honda MSX/GROM, it's better if you spend a lot of time with wide open throttle (like lots of freeway riding), besides that, it has superior longevity, better ignition and improved fuel economy. Overal, it's simply the best plug for the GROM and Webike sells them at a very good price also! View detail
Fits: YAMAHA MAJESTY250, YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY, YAMAHA XVS950A, YAMAHA SCR950, YAMAHA GRIZZLY700FI, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA BOLT, SUZUKI Swish LIMITED, SUZUKI swish, SUZUKI Gixxer, SUZUKI Address125, SUZUKI V-STROM250, SUZUKI ADDRESS110, SUZUKI GSX250R, KAWASAKI VULCAN900Custom, HONDA Dio110, HONDA glom, HONDA LEAD125
I think I'm feeling Torque up.
After the last replacement at 10,000Km, it was replaced for the second time at 20,000Km.
There were no glitches, and I feel like Torque has gone up in my mind.
View detail
Fits: SUZUKI ADDRESS110, SUZUKI V-STROM250, SUZUKI GSX250R, KAWASAKI VULCAN900Classic, KAWASAKI VULCAN900Custom, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA CBF125, HONDA CB125F, SUZUKI Address125, SUZUKI Gixxer, SUZUKI swish, SUZUKI Swish LIMITED, YAMAHA BOLT, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA GRIZZLY700FI, YAMAHA SCR950, YAMAHA GRAND MAJESTY, YAMAHA MAJESTY250
This is a satisfactory product
I purchased it as a replacement for the genuine Yamaha Bolt 950.
It feels much more lively than the genuine product and is expected to be advantageous in fuel efficiency.
The price is a little expensive, but I think it's not bad if it lasts longer.
I plan to purchase it again next time. -------------------------------------------------- -------- I purchased it as a replacement for the genuine Yamaha Bolt 950. It feels much more lively than the genuine product and is expected to be advantageous in fuel efficiency. The price is a little expensive, but I think it's not bad if it lasts longer. I plan to purchase it again next time. Powered by Google Translator
View detail
XG250 TRICKER
I use it on my XG250 TRICKER.
The Motorcycle Cover is a consumable item, so this thickness is sufficient for this price.
View detail
I think it is necessary and sufficient.
This is just my personal opinion, but I think it is not a PeLePera, and considering the price, I think it is satisfactory enough. View detail
Fits: SUZUKI ADDRESS110, SUZUKI V-STROM250, SUZUKI GSX250R, KAWASAKI VULCAN900Classic, KAWASAKI VULCAN900Custom, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA CBF125, HONDA CB125F, SUZUKI Address125, SUZUKI Gixxer, SUZUKI swish, SUZUKI Swish LIMITED, YAMAHA BOLT, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA GRIZZLY700FI, YAMAHA SCR950, YAMAHA GRAND MAJESTY, YAMAHA MAJESTY250
The difference in acceleration from a stop is palpable.
[How is it used?
Used on PCX125 JF56.
I noticed that I had run about 10,000 km without replacing the Standard Plug BP5HA of NGK that I was using last time, and the sluggishness at startup became noticeable, so I replaced the plug.
I bought my first Iridium plugs because they are single cylinder and I wanted something a little more expensive.
How was your experience with it?
After the replacement, the difference was immediately apparent.
The acceleration from a standstill was dramatically improved; it felt like it was accelerating in perfect sync with the throttle opening, and I immediately knew I was glad to have replaced it.
However, it is possible that this Plug is good, but it is also possible that it has not been replaced too often and the difference was found to be haDrill.
The exchange took about 15 minutes.
Driver and Plug wrench are available for replacement.
The Plug can be accessed by removing the Foot cover on the Right Side toward the Front of the vehicle and removing the Screw1 pc that holds the Cover around the Plug.
Now it is time to remove the Cap and replace it with a Plug wrench.
How did it compare to other products?
The last time I replaced the plug was about a year ago, and I forgot about it, so I can't really compare, but I think it is better than the Standard Plug BP5HA.
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
CB250R installed.
I installed it on my CB250R. Affordable and easy to see.
It's just right because it doesn't stick in the Motorcycle seat.
View detail
Fits: YAMAHA CYGNUS XSR, SUZUKI Address125, SUZUKI ADDRESSV125S, SUZUKI ADDRESS110, SUZUKI swish, SUZUKI LETSBasket, SUZUKI FB90, SUZUKI FB50, KAWASAKI KLX125, KAWASAKI D-TRACKER125, HONDA PCX150, HONDA PCX125, YAMAHA CYGNUS 125, YAMAHA CYGNUS X
Satisfied
Asahi Windshield's Windshield is included.
Rear box is 30L.
View detail
Fits: YAMAHA MAJESTY250, YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY, YAMAHA XVS950A, YAMAHA SCR950, YAMAHA GRIZZLY700FI, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA BOLT, SUZUKI Swish LIMITED, SUZUKI swish, SUZUKI Gixxer, SUZUKI Address125, SUZUKI V-STROM250, SUZUKI ADDRESS110, SUZUKI GSX250R, KAWASAKI VULCAN900Custom, HONDA Dio110, HONDA glom, HONDA LEAD125
Plugs are also consumables.
Replaced from OEM Product (CPR7EA-9) with about 5000km since previous replacement.
I also took a look at the removed Plug and found that the burn was just right to slightly burnt, and that it was worn out. Do I need to change it yet?" So much so that.
My feeling is that the vibration from the Engine when running at a constant throttle has been reduced. I feel that the vibration from the Engine when running at a constant throttle has been reduced.
However, it is difficult to evaluate the replacement because it may have been replaced from a worn-out condition.
The price is about 1000 yen higher than OEM, but it is not that expensive, so if you are interested, you may put it on to see when it is time to replace it.
View detail
be too much
I would like more room.
Sure, you can get in, but it will be tight-fitting with no room at all.
Recommendation to others is not possible at all.
It's a shame because I had high hopes for it
View detail
Just right for NSR250R
I bought this for my NSR250R Cover.
It is not too thick, not too thin, just normal. When you hold the folded Cover, it is zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.
View detail
Cannot be installed due to wrong Bolt
Why didn't you check Bolt twice? I could not install it today. I didn't think it was wrong.
The bottom of the Bolt is supposed to be forward and the top inverted, but the Bolt enclosed for installation had the bottom forward and the Mirror side inverted.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
quite good shape
Mirror was rusted out and replaced with a more recent form.
The navigation is easy to see and the design of the Mirror makes the vehicle feel like it has been exposed.
There is no runout when driving.
View detail
best grip heater
This is 3rd time i use Kijima grip heater. I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without addhesive, of course need to make effort little bit to install. View detail
Maybe LL would be better for Z900RS people?
L makes it seem a little small.
If you make it LL, it's just right.
View detail
Fits: HONDA BENLY50, HONDA DIO110, HONDA LEAD125, HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X
The atmosphere has changed completely and it has become Sporty!
It is perfect for YAMAHAGRAND MAJESTY, easy to install, no problems, wider field of view, increased safety, and most importantly, Parenthesis is great! View detail
Fits: SUZUKI ADDRESS110, SUZUKI V-STROM250, SUZUKI GSX250R, KAWASAKI VULCAN900Classic, KAWASAKI VULCAN900Custom, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA CBF125, HONDA CB125F, SUZUKI Address125, SUZUKI Gixxer, SUZUKI swish, SUZUKI Swish LIMITED, YAMAHA BOLT, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA GRIZZLY700FI, YAMAHA SCR950, YAMAHA GRAND MAJESTY, YAMAHA MAJESTY250
trust
I replaced it with this one right after I bought my CRF125F.
I used it for about 50 hours and replaced it for the second time.
I'm just going to replace it before it gets worse, so there's no change in particular.
I guess I'll just have to wait until the next exchange to ask them to work hard again.
View detail
Fits: HONDA BENLY50, HONDA DIO110, HONDA LEAD125, HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X
Prices are low, but
Purchased for the design, visibility and price.
No instruction manual is included, but only a bolt and spring washer are needed for installation.
I installed it on a GSX-S125 '23, but first of all, the bolt hole on the Mirror is too small for the Washer to fit in.
Bolt is too long and Mirror is fixed when installed with Bolt alone.
I had to cut off the screw threads.
Please check the length of the lower hole of the car body to be installed and purchase the product.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
Better than OEM
Replaced because OEM is too hard to see. Installation was easy. I can't say how visible the OffsetHolder is since it was replaced at the same time, but it is more visible than the NORMAL. View detail
Two years of use and still Large sturdy!
I used it on another vehicle with Blue empty parking for 2 years and it has worked fine with no problems except for some ragged loosening and fading of the fibrous material around the key for hole, so I bought a Repeat!
It is also useful for the Motorcycle body as it does not scratch easily!
I don't know because I have not used it in a dusty or sandy environment, but it works fine in an environment with Concrete and Asphalt floors.
View detail