Reviews
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI BURGMAN400, SUZUKI V-STROAM, SUZUKI GSX-S1000S, SUZUKI GSX-S1000, SUZUKI GSX250R, SUZUKI GSX-S1000GT, SUZUKI V-STROAM1050, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM650, SUZUKI V-STROAM650XT
First time is tough.
If you are replacing the Bar End for the first time, be careful.
I guess it depends on the type of car, but in my case (2023 KATANA),
First, the Bolt that is included will not be used. Also, most of the included parts will not be used.
I use the OEM Bolt, but sadly it does not fit this Bar End.
I think it is a lack of understanding of the structure of the Bar End itself, but at first I used a part like the Adjuster that came with the Bar End without understanding it, and the Bar End did not come off.
We ended up taking it to a Motorcycle shop and decided to remove this Bar End.
Since the product photo does not show the attached parts, I will buy the actual product at the Shop in the future, even if it is a little more expensive, instead of using Webig.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
EFFEX Lowdown Kit
Even 2cmDown makes quite a difference in the sense of security.
Quantity:I think Set's STAND is also sturdier and better made than OEM.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
I can work on it myself, but it's more difficult.
Link Plate was replaced while supporting the car body with Panda Jack using only Side Stand.
Both foot tongs are now attached up to the ball of the big toe and feel more secure.
Since the rear was lowered, the front fork also protruded 1.4 cm.
View detail
Fits: DUCATI SCRAMBLERIcon, DUCATI 1299 Panigale., BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH STREETSCRAMBLER, SUZUKI VANVAN200, SUZUKI BANDIT1250, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM250, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DL1000 V-STROM650, SUZUKI Intruder Classic
Cute.
Pad thickness is just right and cute.
It would be better if it were cheaper.
View detail
It says it is TMAX560 techmax compliant, but it is completely useless.
I bought it because it was supposed to fit, but it did not match the Screw shape of the Handlebar End at all. I was very disappointed. View detail
Fits: Others , YAMAHA SEROW250, YAMAHA TMAX500, YAMAHA RZ250R, TRIUMPH TRIDENT 660, YAMAHA MT-09, SUZUKI RF900, SUZUKI GSXS1000F, SUZUKI GSX-S750, SUZUKI GSX1100S KATANA, SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSX-R750, KAWASAKI zephyrχ, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ninja250, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX1200
Great product for the price
Sometimes a backpack is not enough.I use it for daily trips ..After reviewing several different tail bags, the Tanax seemed to be the perfect size.the Trails End bag attached securely and the excess length of the strap ends, tuck away cleanly. It looks well made, and I especially like the fact that the bag keeps it shape when empty.It is waterproof and the fabric is durable.Additional pockets are very functional.really great price, good and quality from many known brands.highly recommend. View detail
Even if it's your first time, just look closely at the structure.
It is an OEM Product and I have no complaints. The gsxs125 is a Shift rod Quantity:Pair (for Left and Right) I have an identical Dust cover on a 3.5" board that cracked at about the same time, so I think it would be a good idea to buy two or three of them. It is not so difficult to replace the cover if you look at the structure carefully and understand it, and it would be good to have a marker to mark the Shift Pedal or Nut so that you can put it back in its original position. Wrench and Grease are all you need. View detail
PetitCustom
PetitCustom by Exactly for One Point's color insert!
I installed it as a trial before putting brembo in.
4miniCustom standard color!
View detail
Standard PetitCustom
For Caliper's color insert!
Trial installation before putting brembo in.
4mini standard color:??
View detail
Small
I bought it for my BMW R1150GS because it fits VST 1050, but it is smaller than I expected. I bought it knowing that it would not fit over the SIDEPannier, but I did not expect that it would not fit over the Top case either. The storage is compact. View detail
The sense of security is extremely Large!
STD Disc sometimes seemed to have too much lever in the full breaking of the Straight end of the Circuit. In addition, the feeling during gripping and releasing was not so strong, and the on and off were very distinct. However, after switching to PremiumRACING, I feel that the braking force is applied as much as my grip, and it is easy to control the braking force I want. In addition, the braking force seems to have been dramatically increased in level, and the sense of security is extremely large. Although I have not yet ridden the circuit after the replacement, I feel that I am more in control of my motorcycle than ever before when I ride on mountain passes. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000 R, SUZUKI GSX-R1000, YAMAHA YZF-R6, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA MT-09 SP, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA FZS1000FAZER, YAMAHA FZ1-S FAZER, YAMAHA FZ1-N FAZER, KAWASAKI ZZR250, KAWASAKI ZEPHYR400
Highly durable Steel
Used on first generation Ninja 250R.
Is this OEM or is this the only Sprocket that's steel and highly durable?
I prefer Black Sprocket, so if that's the case, my options are narrow.
I like the look of Parenthesis.
The paint job is also Beauty, so it is comparable to Duralumin products.
I mean, Material:So much more expensive than Aluminum...
Installation is DIY.
No special sukill will be needed.
Lock nut is also black because it is black.
View detail
Fits: BMW K1300 S, BMW F800 S, BMW K1300 R, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA YZF-R250, YAMAHA YZF-R3, YAMAHA YZF-R6, HONDA CBR650 F, HONDA CTX700, HONDA CTX700 N, HONDA NC700 S, HONDA NC700 X, HONDA NC750 X, HONDA NC750 S, HONDA PS250, HONDA VARADERO 125, HONDA VFR1200 F
I like the texture.
CB1300SF, LLSize is just right, Spec. is a little different, but I bought Repeat of the same product. The front and rear tires are also hidden to the bottom. The holes for the front and rear tire locks are thick enough to fit. The back is now black so it is easier to put on. The fabric is thick and durable. The one I used before could be used for 4 or 5 years, but I can't put it on while the exhaust system is hot, so I put on the small one after an hour. I have used other manufacturer's products, but I want to keep my Motorcycle in Large size, so I think I will repeat this next time. View detail
Fits: SUZUKI Hayabusa, SUZUKI GSX1300R HAYABUSA, SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600
Good looking
The black color was chosen because the Swing Arm of the Type 3 GSX1300R HAYABUSA is black, and the motorcycle itself has become more austere. View detail
Replace Red with Golden Pad
I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `)
View detail
Lever is rounded for easy grip
Texture and finish are both very beautiful
Unlike other types, Touring type has a rounded lever for easy gripping.
Easy to adjust lever position
View detail
Gilles High Quality
These Gilles paddock stand bobbins are a little larger than the previous version and use a clever system that holds the spool onto the screw in adapter using a retaining ring inside the spool (see picture). As with the older model the outer spool rotates freely from the adapter when installed. This helps reduce wear on the spool and makes lifting the bike easier. The spool itself is made of a special polymer/plastic that is much harder wearing than Aluminium. The instructions don’t provide a torque setting for the adapter and suggest using a spanner for installation. However there is a Hex fitment on the back of the adapter thread (see picture) that allows for the use of an Allen/Hex key for installation and removal. High quality made item. View detail
Yoshimura Quality
These oil filler caps are more usefull then you would initially think. The ability to torque them correctly helps prevent any venting or misting of oil from the filler on my track/race bike. They look really good with the usual Yoshimura quality. I miss the old works colour, but the grey still looks good. When installing these always use a barrier of some kind like tape, plastic or latex from an old workshop glove. This helps prevent damage on installation. Max torque is 8 - 10nm but more than that might cause some minor wear/damage, so ideally use a torque wrench. View detail
When in doubt, SUNSTAR
Balance of lightness and durability, true circle, etc.
In terms of color variations and price, the xam is the better choice.
For now, you can't go wrong with SUNSTAR.
View detail
License Plate bend prevention
Before I installed the License Plate Base, I used to catch my pants and bend them, but since I installed the License Plate Base, I haven't had any problems. View detail