Reviews
Just another small part that helps improves engine performance over the original part
About quality and texture - The hyper ignition coil from SP Takegawa is made from injection molded plastic with a red surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - Just another small part that helps improves engine performance over the original part. The hyper ignition coil is worth the expense for the stronger engine feeling through the entire RPM range. Products to buy together - A key product to purchase when upgrading the ignition system is a spark plug cup to complete the hyper ignition coil installations as this part does not come complete ready for use. Difficulty of installation - The installation of the hyper ignition coil is an simple task that took 0.5 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the hyper ignition coil directly to the frame. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the hyper ignition coil is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the hyper ignition coil, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Lineup abundant and easy to find
I use it for various types of vehicles as if it were a regular product.
Never had a problem.
Even with external parts, there were some problems such as hardness of the hooks and subtle quality of the screw threads on other cars.
NTB offers a variety of car models and is inexpensive, and I use it often!
View detail
Fits: KAWASAKI ZXR250, KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ELIMINATOR 250V, KAWASAKI ZXR250R
KLX125
KLX125
DrumstickDrumstick fits!
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
I got a lot of iron powder.
I used it to clean up my new MONKEY125. It was my first and second DIY oil change, but it was done without any problem. View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI KLX150S, Others
Used for DT50.
I'm 184cm tall and the OEMHandlebar was making me feel like Curve was repricing, so I changed it.
Operability has been improved.
View detail
I'm not sure about the electrical system, but ….
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
These are the Parts that are required when using LEDs with DRC's Kit.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
Satisfied with high quality and functionality
I installed it on my CT125.
The OEM felt the need to replace it with Other Brand Product since the grip is not adjustable, and selected 3Finger from the stable ZETA.
Since I had already used it on another Motorcycle and was satisfied with the comfort of using it, I did not consider choosing from another Manufacturer.
The grip and feel of the controls are now much better, and I realized once again that you have to choose good quality parts for parts that are always in contact with each other.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
BrakeTouch is also improved
I have used it on my KLX230R and it does not break the lever even after repeated falls, and the touch of the brake lever is improved over the NORMAL, so I installed it on my CRF250L as soon as possible.
With the NORMALLever, when I apply the brake, it feels unreliable or squishy (which is natural since it is an off-road vehicle), but with this lever, I feel that the ease of levering and the construction of the lever improves the touch and makes it easier to control the brake. I think it may be because the lever is positioned closer to the car.
Installation is easy since all you have to do is remove the Bolt and replace it with a NORMALLever, but it would be easier to work with if you loosen the Mirror Holder and change its orientation.
When replacing them, it is better to grease them up properly before replacing them.
View detail
very good
Off car is exercised while riding, so I feel that Aluminum Tube is Smooth because it is not deformed by force or deterioration! View detail
![Grab Bar Carrier [Daytona Original]](https://img.webike-cdn.net/catalogue/11160/73155_1_TS.jpg)
Yeah, yeah, yeah, this is better than OEM!
I installed it on a KLX125 and it's been about 6 months and I'm reviewing it.
The reason I bought it is a little different from the others, Ease of removal and installation." It is
We use a KLX125 for both touring and Enduro racing.
So far we have been using KawasakiOEM's Carrier.
OEM is a good OEM, but Race is obligated to remove Carrier.
The OEM was a pain to remove & install, so I re-purchased this one by DAYTONA.
As a result, I am Large satisfied!
You're stuck on the part about needing to cut the Side cover, I'm not going to say anything bad about it, so I RECOMMEND that you buy this one from the start.
Off cars can be scratched!
I initially put an OEM carrier on the side cover because I didn't want to cut the side cover, but when I drove around on a busy forest road, the side cover was scratched up in no time!
When you get out of Race, you get new scratches here and there, and it's more like a medal!
Shaving the side cover is not at all Large compared to the amount of scratches!
As a bonus, DAYTONA's Carrier can carry more cargo than the OEM!
The Carrier is easy to install, easy to remove, and can carry a lot of cargo. If you are not sure between the OEM and this Carrier, we recommend this Carrier without any questions!
View detail
this is one of the parts that required for 2013+ ZX6R steering damper bracket. these are the parts list for the bracket excluding the steering damper and bolts: BRACKET 11056-2308 BRACKET 11056-2315 WASHER 92200-0293 COLLAR,L=3.3 92152-0834 WASHER-PLAIN-SMALL,8MM 410AA0800 View detail
Fits: KAWASAKI D Tracker 125
Even though the car model Bolt On.
I bought it because it is Bolt On for my car model.
Caliper's Screw is covered by Caliper's Screw.
I can't remove the Caliper Adapter.
I think Straight is a good choice.
View detail
Thank goodness it's readily available.
I used KIJIMA oil for replacing the oil in my KLX230R. I bought KIJIMA oil because it takes a long time to deliver OEM products and they are often more expensive than the Replacements. I was able to replace the oil without any problems. View detail
SP TAKEGAWA discharge bolt (w / magnet)
What are you waiting for? What are you waiting for? I want to know what I want to know. I want to know what I want to know.
Although it is not a visible part, this product is really good in that it can filter out iron powder inside the bike. The finish and design are wonderful. Thank you for the quick delivery. I would recommend this product to others. -------------------------------------------------- -------- It's not something you can see, but it's really nice to have this product to filter out the grit from the inside of the bike. The finish and design is great. Thank you for the prompt delivery. I would definitely recommend this product to others. Powered by Google Translator
View detail
A well designed product that integrates into the factory engine case to add a useful feature
About quality and texture - The drain bolt with magnet from SP Takegawa is made from billet aluminium with precision machining and a red anodized surface finish while the quality from the overall fit and finish is perfect. About the feeling of use - The drain bolt with magnet is a well designed product that integrates into the factory engine case to add a useful feature that helps with engine longevity by removing unwanted metal from the oil. Products to buy together - A key product to buy together with the drain bolt with magnet is the SP Takegawa LED temperature guage that will allow for monitoring of the engine oil temperature to ad further longevity of the engine. Difficulty of installation - The installation of the drain bolt with magnet is a simple task that took 0.2 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the drain bolt with magnet to the engine case. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for but the drain bolt with magnet is priced higher this time round. The design of this drain bolt with magnet with it's sensor hole is what sets it apart from the others. About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filter cover, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic. View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
Good product but shorter than I expected.
I like both the detailing and the look of the product.
But is 4Finger better for me?
It is about 2 or 5 Finger long when I hold it.
View detail
Fits: YAMAHA CYGNUS XSR, SUZUKI Address125, SUZUKI ADDRESSV125S, SUZUKI ADDRESS110, SUZUKI swish, SUZUKI LETSBasket, SUZUKI FB90, SUZUKI FB50, KAWASAKI KLX125, KAWASAKI D-TRACKER125, HONDA PCX150, HONDA PCX125, YAMAHA CYGNUS 125, YAMAHA CYGNUS X
Satisfied
Asahi Windshield's Windshield is included.
Rear box is 30L.
View detail
Cost-effective
I was worried about putting a UniversalPad that fits various SmallEngine Displacement VolumeMODELs on my Racer KLX230R, but I bought it because it was cheaper than KawasakiOEM by a LARGE margin and because it was in stock. I was not sure if I would be able to find any severe touch or not because it is off-road, and I thought it would be no problem at all. My running style is to use Rear a lot, so I feel this cosmetic is rather attractive. View detail
![Replacement Oil Filters [10 pcs]](https://img.webike-cdn.net/catalogue/images/117775/35200_TS.jpg)
Buy wisely in bulk! Recommendation for those who own several motorcycles!
10 pieces Quantity for business use" at a great price:The "Set" is a great recommendation for those who own several motorcycles, because you can buy them in bulk at a low price! It may seem like a lot to have 10 sets at once, but I have a Ninja 250SL and a Z125, and the discount is very helpful for me! View detail