Reviews
Genuine DID 420NZ3 Gold Spare Chain Link
I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Rear Sprocket purchased with tooth count change
Purchased to change the number of Chain pieces when changing the number of teeth on the Rear Sprocket. clip type is easy to adjust as it can be removed as many times as needed. View detail
Chain assembly
The chain was stretched, so I cut it and used it for reassembly.
Installation does not seem to be that difficult since it is a Clip.
View detail
Sometimes it is more Large strange to remove an old OEMRubber.
[How is it used?
I purchased this product to do a little dress-up work on a long-abandoned LITTLE CUB after maintenance &restore had been completed.
Side StandRubber was installed in a high percentage of Honda cars in the 1980's and 1990's. Even when the ground was soft at the parking position, it was very useful because it was difficult for the stand to be buried.
The vehicle we acquired this time did not have any deterioration of Side StandRubber, but we changed Footpeg Rubber and Kick Pedal Rubber to Brown as well as Refresh, so Side StandRubber was also changed to Brown.
Did you receive the item as per the Image?
Since they are the same brand, both Footpeg Rubber and Kick Pedal Rubber are Brown, and I am self-satisfied with the color.
Was it difficult to install?
Less difficult, but the old Side StandRubber won't come off!
The mounting part was deformed, and the rubber was firmly wedged in the rubber due to rust, so it took a long time to come off, even though I sprayed oil spray all over it.
After removal, the deformation of the mounting area should be corrected, the rust prevention process should be performed, and then the mounting procedure should be reversed to complete the process.
Older vehicles or vehicles that were ... in storage conditions may have a hard time.
How did you like it?
The functional part of the product is the same as the OEM, and it does a good job of preventing the sinking of STAND.
The number one effect is. They're pretty to look at." It is a modest and unobtrusive part of the project, but it is highly self-satisfying.
Was "Included Parts:" attached?
Side StandRubber1pc. only.
Were there any disappointments?
As I mentioned above, it has the same effect as OEM and looks pretty enough to meet our expectations.
Other items that would be helpful
Point and hang of installation
As mentioned above, for some vehicles, removing the originally installed OEM parts can be a tedious process. 'A simple job to remove OEM Parts and install this product' It is
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...?
Well, if you are buying this product, you know which Parts to replace, so I don't see any problem.
[Notes]
Depending on the condition of the STAND section of the vehicle, force may be required, so please be careful not to injure yourself.
[ITEMS TO BUY TOGETHER
Footpeg Rubber and Kick Pedal Rubber are also sold by the same KIJIMABrand, so it would be fun to enjoy color coordination.
Whether you want a unified look or dare to use RoseRose's colors, please fully demonstrate the buyer's Sense.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail
Fits: HONDA BENLY50CD90 , HONDA BENLY50CD90 , HONDA BENLY50CD50 , HONDA BENLY50CD50 , HONDA BENLY50CD50 , HONDA CT110 HUNTER CUBCT90, HONDA CT110 HUNTER CUBCT110, HONDA SUPER CUB 90Custom , HONDA SUPER CUB 90, HONDA SUPER CUB70Custom , HONDA SUPER CUB70, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50 "Weather Child" Ver., HONDA SUPER CUB 50 STREET, HONDA SUPER CUB 50 60th Anniversary, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
KIJIMA Spoke Wrap
I think it's a good idea because it's cheap and easy to change the look of the product. View detail
Fits: HONDA C70 A, HONDA C70 A, HONDA C70 A, HONDA C70 A, HONDA CT90 A, HONDA CT90 A, HONDA CT90 A
I hope it has some effect.
I replaced it with a new one.
I hope it has some effect. (Lol)
View detail
Fits: HONDA XL100 A, HONDA TLR250, HARLEY-DAVIDSON V-Rod VRSCAW, HONDA TLR200 TLR200, HONDA TLR200, HONDA TLM220R , HONDA TLM220R , HONDA TLM220R , HONDA MT125ELSINORE, HONDA TLM220R , HARLEY-DAVIDSON FXSTS, HARLEY-DAVIDSON FXSTD, HARLEY-DAVIDSON FXSTB, HARLEY-DAVIDSON FXSTC, HARLEY-DAVIDSON FXST, HARLEY-DAVIDSON FXDX, HARLEY-DAVIDSON FXS, HARLEY-DAVIDSON FXDWG, HARLEY-DAVIDSON FXDC, HARLEY-DAVIDSON FXDL
Directing Fashion
The Spoke on my MOTARD vehicle was getting dirty, so I bought Spoke Wrap to make it more stylish.
Cutting is required depending on the length of the Spoke. It also takes a little time to install, so you may want to work on it when you have time.
View detail
Fits: HARLEY-DAVIDSON FXDC, HONDA XL100 A, HARLEY-DAVIDSON FXDWG, HARLEY-DAVIDSON FXST, HARLEY-DAVIDSON FXDB, HARLEY-DAVIDSON FXS, HONDA SUPER CUB 50 60th Anniversary, HARLEY-DAVIDSON FLSTC, HARLEY-DAVIDSON FLTRI, HARLEY-DAVIDSON XLH883H, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XLH883, HONDA XL80, HARLEY-DAVIDSON XL883C, HONDA XL75, HARLEY-DAVIDSON FLSTS, HARLEY-DAVIDSON XL50, HONDA XL70 A, HONDA XL250, HONDA XL200
Ideal for Rust concealment
There is Rust on the Spoke and it is coming dull even though it is clean. 。 It is inevitable because of age-related deterioration commensurate with the age of the car. 。 We purchased it in the hope that it would look a little better. View detail
Fits: KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY BAJA, HONDA NSR50, HONDA TLM50, SUZUKI TS50W, HONDA C50 SUPER CUB 50 Custom, HONDA BENLY90S, HONDA ATC70, HONDA APE100 TypeD, HONDA APE100, HONDA CF50 CHALY, HONDA CF50 CHALY, HONDA CD90, HONDA CD90, HONDA CD50
DID chain link
"Purchased for HONDA SUPER CUB 50 CUSTOM.
Part number: 420D_G&B-RJ, manufacturer DID.
The DID chain link was bought in gold color to stand out on the chain. Everything went well. -------------------------------------------------- -------- Acquired for Honda Super Cub 50 Custom. Article details: 420d_g & b-rj, manufacturer DID. The connecting link in the DID chain bought a gold color to stand out on the chain. Everything came well. Powered by Google Translator"
View detail
Fits: HONDA XL125S, HONDA XL125S, HONDA XL125R, HONDA XL125S, HONDA XL125R, HONDA TR200 Fatcat, HONDA XL125K2, HONDA XL125, HONDA XL125K2, HONDA XL125, HONDA XL100S, HONDA XL125, HONDA XL100S, HONDA XL100, HONDA XL100, HONDA XL100, HONDA Topic, HONDA Topic, HONDA Topic, HONDA Topic
Instead of an OEM
The installed Brake Shoe was replaced because it was from that time.
It looks like it could be ordered by OEM, but Pad and Spring had to be ordered separately.
In Vesla, which is easily available for purchase.
There is a hang when inserting Spring, but it is not that difficult.
View detail
Fits: HONDA C70 A, HONDA C70 A, HONDA C70 A, HONDA C70 A, HONDA CB125S A, HONDA CB125S A, HONDA CB125S A, HONDA CB125S A, HONDA CB125S A, HONDA CB125S A, HONDA CB125S A, HONDA CB125S AC, HONDA CB125S AC, HONDA CM185T A, HONDA CM185T A, HONDA CM200T A, HONDA CM200T A, HONDA CM200T A, HONDA CM250C A, HONDA CM250C A
New replacement due to age-related deterioration.
[How is it used?
This is a replacement of a SteringTopBall with Stages due to age-related deterioration.
How was your experience with it?
Steering is now as light as new with no resistance!
How did it compare to other products?
No other company's products
[Points to note]
If you ride the car with staged parts, the worst that can happen is that the bearing will be damaged and you will not be able to drive the car.
View detail
Fits: HONDA XL125S, HONDA XL125S, HONDA XL125R, HONDA XL125S, HONDA XL125R, HONDA TR200 Fatcat, HONDA XL125K2, HONDA XL125, HONDA XL125K2, HONDA XL125, HONDA XL100S, HONDA XL125, HONDA XL100S, HONDA XL100, HONDA XL100, HONDA XL100, HONDA Topic, HONDA Topic, HONDA Topic, HONDA Topic
OEMSpec.
CT110 HUNTER CUBOEMSpec. Vesrah ZV-VB126S. I thought that the groove of Brake Camshaft is a little narrower than OEM, so it is not easy to move if you put it on solidly. It works better than OEM and Touch is good! 。 I don't know about durability since it's only been a month. View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
With Impact
I put it on my AC09 JAZZ and it was EXACTLY! View detail
CUSTOM WHEEL CT110 1996
Honda Genuine Part 42601-121-690 fits all my Honda CT110 1996 standard wheel parts (110mm brake). NO modification required, everything fits. My original OEM rear hub was unservicale. So I choose the 42601-121-690 over the 42601-153-600ZA because it is Silver. As a genuine part made in Japan it is of high standard. I like the contrast of the silver hub in the black rim with rays of shiny stainless spokes, thank you Webike Japan. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY BAJA, HONDA GORILLA, KAWASAKI Z125 PRO, KAWASAKI KX100, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, HONDA C90 SUPER CUB 90, KAWASAKI KSR110, HONDA C70 SUPER CUB70, HONDA C50LM LITTLE CUB, HONDA C50LM LITTLE CUB, HONDA C50L LITTLE CUB, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50
420DS Link Joint
About quality and texture - Excellent quality repair item here from DID, basic design with no fancy O-rings. About the feeling of use - New clip now has a positive locking force and is remaining secured. Products to buy together - Good idea to pick up a chain cleaning brush if you haven't already. Difficulty of installation - Easy installation, all you will be needing is a pair of plyers. Cost performance and comparison with other products - Nice and cheap repair item if your old one goes before the rest of the chain, can't go wrong. About shipping and packaging - This sea freight combined order was very well priced and arrived in just 4 weeks to Australia this time round, packaged perfectly and all items arrived safety. Any concerns, cautions, or advice when purchasing - If you are requiring a replacement link joint please be sure to select the correct type for your chain as there are a few optons available. View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
mounted on my littlecub
Nice little detail that immediately catches the eye If you want something nice for your littlecub and little money I can recommend this one. You have them in different colors View detail
Fits: HONDA LITTLE CUBLA, HONDA CUB All models, HONDA CROSS CUB50, HONDA MD50 (Postal CUB), HONDA SUPER CUB 50, HONDA SUPER CUB 100 (CUB100 THAI), HONDA CT110 HUNTER CUBCT110, HONDA SUPER CUB110PRO, HONDA SUPER CUBC125, HONDA SUPER CUB 90, HONDA CT110 HUNTER CUBCT90, HONDA SUPER CUB110MD (Postal CUB), HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CT110 HUNTER CUBC105H/T (OHV), HONDA MD90 (Postal CUB), HONDA SUPER CUB70, HONDA MD70 (Postal CUB), HONDA SUPER CUBC65, HONDA SUPER CUBC105
Present.
Presented at the familiar RidersCafe. View detail
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50L LITTLE CUB, HONDA C50LM LITTLE CUB
DIDJoint link
I bought this as a spare.
I feel secure, but it would be nice if the Cost was a little less expensive.
View detail
Fits: KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY BAJA, HONDA NSR50, HONDA TLM50, SUZUKI TS50W, HONDA C50 SUPER CUB 50 Custom, HONDA BENLY90S, HONDA ATC70, HONDA APE100 TypeD, HONDA APE100, HONDA CF50 CHALY, HONDA CF50 CHALY, HONDA CD90, HONDA CD90, HONDA CD50
Connecting link.
I bought a connecting link just in case to replenish the set of necessary spare parts. There are no questions about workmanship and materials. It was fastened easily, it is fixed well. I recommend purchasing, again, the original from Japan. I bought a connecting link just in case to replenish the set of necessary spare parts. There are no questions about the workmanship and materials. It was fastened easily, it is fixed well. I recommend purchasing, again, the original from Japan. View detail
Fits: HONDA XL125S, HONDA XL125S, HONDA XL125R, HONDA XL125S, HONDA XL125R, HONDA TR200 Fatcat, HONDA XL125K2, HONDA XL125, HONDA XL125K2, HONDA XL125, HONDA XL100S, HONDA XL125, HONDA XL100S, HONDA XL100, HONDA XL100, HONDA XL100, HONDA Topic, HONDA Topic, HONDA Topic, HONDA Topic
Brake Shoe is a Besra 1 choice.
Bought this for a Honda ELSINORE 125 for Replacement.
There are other manufacturers, but it is Besra, which is made in Japan of trust.
For a long time, I've decided that Brake Shoe is Besra.
No sanding is required. (Initial break-in is necessary)
I will buy Repeat again next time.
View detail