Reviews
Good heating grips!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too View detail
SEA BASSTS200R Inverted Front Fork
You can buy OEM compatible products for a little cheaper. View detail
Water pump pliers
Even a light press-fit clip can DID be tricky, requiring a press-fit of the plate to create a groove to stop the clip. A cheap chain tool often fails to press-fit the clips properly. If you use a water pump pliers to tighten the 6mm nut to the plate with force, you can get a groove for the clip. I do not want to buy a Stripele for my own use, considering the frequency of use. View detail
Oil seal
Project bike, one of most difficult to work on as need to disassemble exhaust to access. Easy to replace once old one removed. Love OEM parts at good price View detail
Fits: HARLEY-DAVIDSON FXDX DYNA SUPER GLIDE T-SportsSuper Glide T-Sport FXDXT, HARLEY-DAVIDSON XL1200C SPORTSTER 1200SUPER Low SuperLow XLT, HARLEY-DAVIDSON XL883SUPER Low SuperLow XLL, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Seventy-TwoSportster Seventy-Two XLV, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSportster Forty-Eight XLX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSPECIAL KnifeSportster Forty-Eight Special XLXS, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFLSTF FATBOY Lo Fat Boy Lo FLSTFB, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC BreakOutBreakout FXSB, SUZUKI BOULEVARDC50, HARLEY-DAVIDSON Electra GlideElectra Glide FLH, HARLEY-DAVIDSON FLHTCUElectra Glide Ultra Classic FLHTCU, HARLEY-DAVIDSON FLHTCElectra Glide Classic FLHTC, HARLEY-DAVIDSON Electra GlideStandardElectra Glide Standard FLHT, HARLEY-DAVIDSON Electra GlideSportsElectra Glide Sport FLHS, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESuper Glide FXD, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDECustomSuper Glide Custom FXDC, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESportsSuper Glide Sport FXDX, HARLEY-DAVIDSON FLHXStreet Glide FLHX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200IronIron XLNS, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Custom Custom XLC
Buns Grip
It is easy to grip and Grip works well. View detail
Would have to be one of the better value magnetic drain bolt
About quality and texture, I can confirm that the quality is great and that the material used is aluminum alloy with a permanent magnet on the base of the bolt. About the feeling of use, Would have to be one of the better value magnetic drain bolt that allows for securing with lockwire and successfully removes fine iron powder from the engine oil.Products to buy together, The drain bolt only comes with one sealing washer so it would be a good idea to add a few spare sealing washers to your cart for future oil changes.Difficulty of installation, I can say the fitment of the drain bolt for my installation was very easy due to the exhaust not limiting the access with the use of a socket and 3/8 drive ratchet.Cost performance and comparison with other products, The pricing of this product is great. You receive a drain bolt with a strong magnet and the head of the bolt has the functions to attach locking wire. The pricing of other drain bolts with similar features like the one from Takegawa is double the price and I don't see the reason for it.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
![Flameproof Motorcycle Cover Kizuna [4L]](https://img.webike-cdn.net/catalogue/images/97508/kizuna_01_TS.jpg)
Fits: HARLEY-DAVIDSON FLSTF Fatboy, HONDA VT1300 CR, HONDA VT1300 CS, HONDA VT1300 CX, HONDA Shadow Classic 400, HONDA shadow slasher, HONDA Shadow Phantom 750, KAWASAKI VULCAN 400 Drifter, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI VULCAN S, SUZUKI Intruder LC250, SUZUKI Intruder Classic 400, SUZUKI Boulevard 400, SUZUKI Boulevard 800, SUZUKI Boulevard M109R, TRIUMPH Rocket III Roadster, YAMAHA VMAX, YAMAHA XV1600 Roadster, YAMAHA XVS 1300CA, YAMAHA XVS 950A
Soft and Fit feeling is very good
The 100% polyester material is softer than most commonly used materials and fits the car body better. The Harley-Davidson Touring model (without windshield) and the Side Back is available in quantity.:Pair (for Left and Right) The MODELs in the "1" can be covered with a donut. View detail
![Main Jet [KEIHIN Round Shape/Large]](https://img.webike-cdn.net/catalogue/13652/450-3030750_TS.jpg)
To match intake and exhaust system changes
MJ's position was raised due to the air cleaner element and the exhaust air removal Up. View detail
Genuine Kawasaki Sump plug Washer for KLE400 1998
The oil on this bike was due for a change and therefore, we also needed to source a new sump plug and also the washer that goes with it. It is always better to be safe than sorry so you don't have any leaks whilst changing. The part was not super hard to find by simply using the tools Webike provide on their hel pages and to be 100% sure, I also cross referenced with Kawasaki schematics. The price for the washer was really good value and added to the other parts in my order, the shipping worked out really cost efficient too. Shipped by EMS all arrived in 5 days. EMS are good value, very fast in delivering and better than some other couriers. All the items in my order were packed individually by Webike warehouse and all nicely padded out in the box so nothing could get damaged in transit. This washer came in the Kawasaki packaging and are really good quality. They are very well made and no tarnishing was found. The are only washers but as they are essentially crush washers, they are definitely needed. Fitted pretty easily and finished off this rebuild. No danger of a leaky sump plug now. Thank you Webike, great job. View detail
Magnet works effectively
It is cheap and the performance is perfect. However, I don't think it has much of a dress-up effect because it is usually invisible, even though it is Blue in color. View detail
Fast delivery and good product
I received the product in good condition. Above all, thank you for sending me a product of low price and good quality.
It hasn't been installed yet, but the quality looks good and I think I'll be able to spend this winter without worrying about my hands.
It's nice to be able to buy it much cheaper than buying it domestically.
Please continue to supply good products at low prices in the future ------------------------------------------ ---------------- I received the product well. It's still mounted, but it looks good quality and I think I can spend my hands in this winter. It is good to buy more cheaper than purchasing in Korea. Please continue to supply good products inexpensive in the future Powered by Google Translator
View detail
Fits: KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZ-R400, KAWASAKI ZZ-R400, KAWASAKI ZZ-R400, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250
Genuine Kawasaki O Ring 14mm for KLE400 1996
So, this bike had a lot of issues with a leak from the radiator system which the customer could not figure out where it was coming from. It was found upon closer inspection that a couple of the small o rings had failed in the system and disintegrated somewhat. Time for a set of new ones. The parts were not hard to find using the help pages and tools Webike provide. I did a little more research to make sure these were the correct ones too. The price was perfect and very cheap, I ordered a couple so I would have a spare if needed. The order was sent via EMS and arrived with me in 5 days from shipping. The o rings are not particularly exciting but they do hold an important job with the system as the owner found out. Luckily, there was not damage to any of the o rings in transit and they are just great condition. There is enough flex but not too soft for the job in hand. Kawasaki do know how to make o rings is all I have to say. Great work Webike, one happy customer. View detail
Fits: KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI KSR PRO, KAWASAKI KSR110, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI ER-4N, KAWASAKI ER-4N, KAWASAKI ER-4N, KAWASAKI ER-4N, KAWASAKI D-TRACKER 125, KAWASAKI D-TRACKER 125, KAWASAKI D-TRACKER 125, KAWASAKI D-TRACKER 125
Genuine Kawasaki 12V 5W for NINJA ZX-10R
This was another of the spare bulbs I like to have around the shop. These do come in handy whilst servicing a lot of different manufacturers of bikes. I did actually need some of these anyway for the NINJA ZX-10R that was in for a full service. One of the bulbs had blown for some reason and I needed these. They were not hard to find using schematics and the help sections on Webike. I opted for EMS as they were a bit cheaper than my usual Fedex Express. These were already in stock so arrived within like 5 days of shipping. Come on, 5 days from placing the order to arriving at my door in the UK. Brilliant. All the parts in the order were well packed and as I also had a couple of small parts in the order, Webike securely wrapped them individually so they were perfect upon arrival to me. These bulbs are super bright and make the bike look really good. Very pleased with them, thanks a lot Webike, cracking work. View detail
Brake Pads
Cheap and easy to handle! Recommendation. View detail
Fits: HARLEY-DAVIDSON FLSTFB FATBOY LO, HARLEY-DAVIDSON FLSTS HERITAGE SPRINGER, HARLEY-DAVIDSON FXSTD SOFTAIL DEUCE, HARLEY-DAVIDSON XL1200S, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883C, HARLEY-DAVIDSON XL883H, HARLEY-DAVIDSON SPORTSTER SUPERLOW, HARLEY-DAVIDSON XL883R, HONDA Shadow Classic 400, HONDA Magna (V-twin Magna), HONDA Magna 750, HONDA Magna 750, HONDA Magna 50, KAWASAKI Vulcan 1500, KAWASAKI Vulcan 1500 Classic, KAWASAKI Vulcan 1500 Classic Tourer, SUZUKI Boulevard M50 (Intruder M800/VZ800), SUZUKI Boulevard M50 (Intruder M800/VZ800), SUZUKI Intruder 250
It looks reasonably luxurious, but...
It looks good, but Valve is no good. It ran out in half a day. It is better to prepare it beforehand. Still, for the price, it is satisfactory and a good value for money, so I can recommend it. View detail
Fits: KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000 (NINJA), KAWASAKI Ninja 1000 (NINJA), KAWASAKI Ninja 1000 (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI NINJA ZX-6R (NINJA), KAWASAKI Ninja ZX-6R (NINJA), KAWASAKI NINJA ZX-6RR (NINJA), KAWASAKI VERSYS (VERSYS), KAWASAKI VERSYS (VERSYS), KAWASAKI VERSYS-X 250 (VERSYS), KAWASAKI VERSYS-X 250 (VERSYS), KAWASAKI VERSYS-X 250 (VERSYS), KAWASAKI VERSYS-X 250 (VERSYS), KAWASAKI VERSYS-X 250 (VERSYS), KAWASAKI VULCAN
Mounted on TS125R
[How is it used?
TS125RFront fork oil seal replacement
Was the one you received as per Image?
Yes
How was your experience with it?
No problem
[Points to note]
Be careful not to scratch sliding surfaces when installing.
How did it compare to other products?
OEM Product equivalent, but excellent value for money.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS-II
Oil seal for Ninja1000 front wheel
Oil seal for front wheel bearing for Ninja 1000.
Material:Since it is a Rubber item, I would like to replace it when Bearing is replaced.
These parts prevent rust from occurring due to moisture intrusion.
View detail
Fits: SUZUKI Boulevard C50, HARLEY-DAVIDSON Electraglide, HARLEY-DAVIDSON Electra Glide Ultra Classic, HARLEY-DAVIDSON Electraglide Classic, HARLEY-DAVIDSON Electraglide Standard, HARLEY-DAVIDSON Electra Glide Sports, HARLEY-DAVIDSON Super Glide, HARLEY-DAVIDSON Super Glide Custom, HARLEY-DAVIDSON Sportster 1200 Sport, HARLEY-DAVIDSON Sportster 1200 Iron, HARLEY-DAVIDSON Sportster 1200 Custom, HARLEY-DAVIDSON Sportster 1200 Super Low, HARLEY-DAVIDSON Sportster 1200 Nightstar, HARLEY-DAVIDSON street gliding, HARLEY-DAVIDSON Super Glide Sports, HARLEY-DAVIDSON Super Glide Tea Sport, HARLEY-DAVIDSON Sportster 1200 Low, HARLEY-DAVIDSON Sportster 1200 Roadster, HARLEY-DAVIDSON Sportster 1200 Roadster, HARLEY-DAVIDSON Sportster 883
Easy on the wrist
I leave Throttle assist on because of tendonitis.
It takes some getting used to, but it reduces wrist strain considerably.
The high speed is outstanding and useful.
As for demerit, the adjustment rubber will be gone before you know it, and you will need to fix it every time it gapes a little, block the grip heater, and change the grip position every time you want to use the pass.
Although it is an easy Goods, until you get used to it, there will be a fair amount of times when you don't notice a blip or a gap and before you know it, the speed has slowed down.
View detail
Fits: KAWASAKI VULCAN-II, KAWASAKI VULCAN-II, KAWASAKI VULCAN-II, KAWASAKI VULCAN-II, KAWASAKI VULCAN-II, KAWASAKI VULCAN-II, KAWASAKI VULCAN, KAWASAKI VULCAN, KAWASAKI VULCAN, KAWASAKI VULCAN, KAWASAKI VULCAN, KAWASAKI VULCAN, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400
Washer at SprocketNut
When replacing FrontSprocket, Nut and Washer must be replaced.
When removing the washer, raise the folded washer to prevent it from loosening, and fold it again after the work is done.
Be sure to use new ones, as they are not reusable.
View detail
Fits: KAWASAKI VULCAN-II, KAWASAKI VULCAN-II, KAWASAKI VULCAN-II, KAWASAKI VULCAN-II, KAWASAKI VULCAN-II, KAWASAKI VULCAN-II, KAWASAKI VULCAN, KAWASAKI VULCAN, KAWASAKI VULCAN, KAWASAKI VULCAN, KAWASAKI VULCAN, KAWASAKI VULCAN, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR400
Nut of FrontSprocket
The Front Sprocket has been replaced several times, but it is the Nut that needs to be replaced each time.
Slightly distorted to prevent loosening.
Be sure to replace them.
Tightening Torque is 125N-m
It is tough without Impact to loosen up.
A Pipe extension might be a good idea, but it will put a strain on the vehicle.
Be sure to use the correct tools.
At the same time, Washer 92200-1065 is also replaced.
Don't forget to prevent galling.
View detail