Reviews
Genuine DID 520ERVT Replacement Chain Link
I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERVT is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. I keep the rivet link type and this clip joint type but had ran out of this version, hence the purchase. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
it works.Never seen such a strong spark
I've run NGK in all of my bikes for years and never have had any issues and definitely get great performance. I won't run anything else in my bikes and have never experienced failure from them. If they are changed at their recommended interval or even a little early you'll be hard pressed to find anything better. Always be sure to set your gap for what your machine manufacturer recommends and you'll be in great shape.There are NGK fake spark plugs on the market. You need to be careful.Buy from Webike or distributors. View detail
Genuine DID 520 Replacement Chain Link
I always like to have some of these in stock in case opf any issue during fitting different chains. The DID 520ERT3 is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Changed from Clip to Crimp
When replacing the chain on the KLX230R, the ERVT came with a clip-type joint, but the clip didn't fit well and I had to press-fit it too much and it failed, so I decided to use a Crimp joint, which I am used to.
I think the Crimp is fine for me, and the Crimp is easier to work with because I'm used to it.
View detail
This is for RG500!
NGK is a stable company.
Don't forget to adjust the gap when using this Plug.
View detail
Fits: KAWASAKI KX500 (KX500-E9), KAWASAKI KX500 (KX500-E8), KAWASAKI KX500 (KX500-E7), KAWASAKI KX500 (KX500-E6), KAWASAKI KX500 (KX500-E5), KAWASAKI KX500 (KX500-E4), KAWASAKI KX500 (KX500-E14), KAWASAKI KX500 (KX500-E13), KAWASAKI KX500 (KX500-E12), KAWASAKI KX500 (KX500-E11), KAWASAKI KX500 (KX500-E10)
Genuine Kawasaki Cylinder Base Gasket for KX500 2001
This bike was desparately in need of a new gasket for their KX500 2001 as the previous owner just did not keep up with maintenance at all. With it being a big off road bike, they do take a bit of work during riding but up keep is no excuse. Not a big deal. I found the correct part number from Kawasaki schematics etc. Webike price was really competitive too. A few other parts with this were ordered together by EMS and delivered in 5 days. All my order was delivered with no issues, all the gaskets were kept flat so not to damage. This gasket is not a big one but it does have some intricate details that need to be correct to fit the cylinder. You can see it has been manufacturered the right way and not cheaped out on it. It is sturdy and has a slight flexibility. All the holes aligned with the fitment and went on pretty easily too. Fitted quickly but precisely in just under an hour with everything else put back together. Very pleased with this one, the bike does sound a lot better and I know it will last a fair few years to come. Thanks Webike. View detail
Fits: Others , YAMAHA YZ250, YAMAHA YB50, YAMAHA RZ50, YAMAHA MINT, YAMAHA GRANDAXIS , YAMAHA EXCEL, YAMAHA DT50, YAMAHA DT230 LANZA, YAMAHA AXIS90, YAMAHA AXIS50, SUZUKI STREETMAGIC110 , SUZUKI RMX250, SUZUKI RMX250, SUZUKI RMX250 S, SUZUKI RM250, SUZUKI RG200 γ, SUZUKI ADDRESSV100 , SUZUKI ADDRESS 110, ROYAL ENFIELD BULLET 350
I bought it for the first time in 20 years.
Installed on YAMAHABirdCity
Ignition coil is AS Uotani
Plug is NGK's Standard Type
I thought it would be easier to see the difference with Small Engine Displacement Volume.
It's a Scooter, so you can't see it from the outside at all, but it's a world of self-satisfaction, so no problem.
View detail
Fits: BETA 450 RR 4T 05-12, HONDA XR 250 L R 91-93, YAMAHA YZ 450 F 03-07, YAMAHA YZ 426 F 02-02, YAMAHA YZ 426 F 00-01, YAMAHA YZ 250 WR 01-02, YAMAHA YZ 250 F WR F 4T 03-06, YAMAHA YZ 250 F WR F 4T 01-02, YAMAHA YZ 250 F WR F 4T 00-00, YAMAHA YZ 250 F 03-06, YAMAHA YZ 125 WR 04-07, YAMAHA YZ 125 WR 03-03, YAMAHA YZ 125 WR 01-02, YAMAHA WR 450 F 12-15, YAMAHA WR 450 F 03-11, YAMAHA WR 426 F 02-02, YAMAHA WR 426 F 00-01, SUZUKI RM 250 Z 07-12, SUZUKI RM 250 Z 04-06, SUZUKI RM 250 96-98
No more heat or fade,Good value
I bought these for my bike. The install went very easy. I tested these immediately the very next day on a twisty road 220 km ride. These brake pads are amazing! They do not squeak, and the stopping power is awesome. Much better than the OEM pads I still had on my bike.I ordered the rear pads and it made a huge difference in stopping power! Now I have ordered the same for the front because these pads seem awesome. Galfer is a brand that I will trust with all my future pad purchases. I don't have a longevity review since I just installed them yesterday but everything so far is great. As always, Webike delivered fast shipping. View detail
Fits: KAWASAKI KLX250R (Competition), KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KL250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX250, KAWASAKI KX500, YAMAHA WR250Z, YAMAHA YZ250, KAWASAKI KDX200SR, KAWASAKI KDX220SR, KAWASAKI KDX250SR, KAWASAKI supersherpa, KAWASAKI KDX200
Commonly usable
SUPER SHERPA uses 13T, dropped 1T from NORMAL.
I think Circlip was harder to put on than OEMSprocket when installed.
Also, the lack of RubberDamper seems to make the noise level a little higher, but I guess all Universal Products are like that.
View detail
Fits: YAMAHA Serow 250, YAMAHA FZN250, YAMAHA FZF250, YAMAHA DT200WR, YAMAHA DT125RE, SUZUKI TS200R, SUZUKI TS125R, SUZUKI RMX250, SUZUKI RM250, SUZUKI RM125, SUZUKI DR650SE, SUZUKI DR350SE, SUZUKI DR350SE, SUZUKI DR350S, SUZUKI DR350, SUZUKI DR250SHE, SUZUKI DR250SH, SUZUKI DR250SE, SUZUKI DR250S, SUZUKI DR250E
Touch is also gentle and works well.
[How is it used?
During BrakeMaintenance on SEROW250 I might try non-DAYTONA Brake Pads once in a while." I bought Vesla's Sintered pad on a whim.
When the pad was replaced, the brake caliper was cleaned and each part was greased up, the brake fluid was replaced, and the pad was used after maintenance was performed in an amateur's way.
Was the one you received as per Image?
I was used to seeing Large Residential DAYTONA and Vesla at the motorcycle supply store Brake Corner, but I always bought the reasonably priced DAYTONA pad.
See Webike's revue. "It'll last. I bought it this time because several people had written about it.
How was your experience with it?
The vehicle equipped with SEROW250 is "Street ride" 30%, "Playing in the mountains." 50%, "Touring" There are very few runs where hard breaking is used for long periods of time, such as 20% of the time.
It is not a type of brake that works with a powerful force from the beginning of gripping! This is not a type that works with a "thump" from the beginning, but a type that starts up braking in proportion to the force with which the lever is held, a characteristic that makes it easy to control.
I don't know if I can recommend Brake's Fee Ring to everyone, as everyone has their own preferences, but it was a great fit for me.
In other reviewers' revue. And it holds up well." I have no need to ask for more in my motorcycle life, and it is a product with sufficient performance.
[Points to note]
Since this is an important component that slows down the vehicle, please be very careful not to get grease or Oiletc. oil on the contact surfaces of the pad and disc rotors during installation.
Naturally, the replacement work must be precise.
How did it compare to other products?
It may not be as good as a very expensive product, but it is a solid product that is nothing compared to other products in the same price range.
Other items that would be helpful
Point and hang of installation
If you are replacing only the pad, there seems to be no problem if you work with the above mentioned points in mind.
However, if the brake pads have been used until it is time to replace them, it would be safer to remove brake dust from the caliper, clean the brake pistons, and replace the brake fluid, and consider doing the work in total.
BrakeTrouble can be life-threatening and large, so if you are not sure about the work, do not overdo it! "PRO" Ask the person in charge of the project.
[ITEMS TO BUY TOGETHER
As mentioned above, if you are working with Brake-related Total, you should purchase Brake fluid, PartsCleaner, and various types of Grease to make your work go smoothly.
[Opinions and requests to Manufacturer
Please continue to provide a wide variety of lineups.
View detail
Fits: KAWASAKI D-TRACKER, KAWASAKI KDX200 SR, KAWASAKI KDX250, SUZUKI SKYWAVE 400, SUZUKI TS125 HUSTLER, YAMAHA DT230 LANZA, KAWASAKI KLX140, SUZUKI SKYWAVE 400, SUZUKI SKYWAVE 400, SUZUKI SKYWAVE 400, YAMAHA TT250 R, HONDA REBEL 125, TRIUMPH SCRAMBLER, TRIUMPH SPEED MASTER, TRIUMPH SPEED MASTER 800, TRIUMPH THRUXTON900, TRIUMPH TIGER, TRIUMPH TIGER 900, TRIUMPH TRIDENT 900, YAMAHA WR200R
I had never considered RearPad in depth!
DownshiftEngine braking is used to enter the Corner, so I don't use the Rear brake as much, but it is best to feel the Touch-fee Ring and braking sensation when it is needed. View detail
Fits: YAMAHA YZ250, YAMAHA YZ125, SUZUKI TS200R, SUZUKI RM250, SUZUKI RM125, SUZUKI DR650 SE, SUZUKI DR250 SE for rear, KAWASAKI KX500, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KLX650, KAWASAKI KDX250 R for rear, YAMAHA YZ250WR 90 for rear, YAMAHA XT250 X DG17J for rear, YAMAHA XG250 TRICKER [TRICKER] DG10J for rear, YAMAHA WR500 Z 92-93 for rear, YAMAHA WR200 92-97 for rear, YAMAHA WR125 91-97 for rear, YAMAHA TY250Z SCOTISH 4ML for rear, YAMAHA TT600 R 93-95 for rear
TouringSEROW
It was a gamble purchase as it was not listed in the compatibility chart, but it was installedLarge sturdy. The price is too low and I wish they would offer more shipping options. View detail
Fits: SUZUKI NZ250S, KAWASAKI Z250, KAWASAKI KZ250, KAWASAKI KZ250, KAWASAKI KZ250, KAWASAKI KZ250, KAWASAKI KZ200, KAWASAKI KX500, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KT250, KAWASAKI KS125, KAWASAKI KLX250, KAWASAKI KLR 600, KAWASAKI KE125, KAWASAKI KDX250
Used for AR125 in Restore.
It is still in Restore, so I just installed it, but it will probably be Large and strong. View detail
Fits: KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI RM250, SUZUKI DR200, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, HONDA FTR250, HONDA CRF250R, HONDA AX-1, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR500, HONDA CR500
DIDClip joint is stable.
Product Name
DID Daido ERSeries Joint link 520ERVT
Item Number
520ERVT_G&G-FJ
Vehicles
KTM 250EXC-F (2022)
Number of man-hours
About 30 minutes
Why did you choose this product?
Because the Clip has come off.
Was the one you received as per Image?
As per Image.
How was your experience with it?
I still prefer DID Joint link for DID Chain.
The construction is solid and the Gold shine is beautiful.
Clip is easy to fit and perfect.
[Points to note]
If you do not press-fit the Clip firmly when stopping the Clip, the Clip will break.
To apply the supplied Grease.
How did it compare to other products?
I feel comfortably at ease.
Items to buy together
DID Daido:520ERVT_G&G-118FB
ERSeriesChain 520ERVT Gold Includes light press-fit Clip(FJ)Joint
View detail
Fits: YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250FX, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR426F, YAMAHA WR400F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250F, SUZUKI RMX450, SUZUKI RMX450, SUZUKI RM250, SUZUKI RM125, SUZUKI RM-Z450
Impressively Plug and Play Part
Installation was fairly easy. The sensor cable that runs down the forks really wants to stay in a circle shape. Ended up cable tying the sensor line to the brake line to help it straighten out. Was able to use one of the various magnetic bolts that were provided to put a magnet in the rotor. From there I was able to use the double sided tape that comes on the sensor to adhere it to a spot on the fork that would run close to the rotor and detect the sensor. Don't really trust the adhesive so I used some more cable ties to help make sure the sensor stays in place. Take your time figuring out where you want to put the sensor. Mock it up with masking tape or cable ties, then get that front wheel spinning so you know if it's picking up your magnet or not. I took a sharpie and outlined where the sensor was going to go right on my fork once I had found a suitable spot. Truly a plug and play component. Very nice. View detail
Fits: YAMAHA YZ250F, YAMAHA YZ400F, GASGAS EC125, GASGAS EC200, GASGAS EC125, GASGAS EC200, GASGAS EC250, GASGAS EC250, GASGAS EC300, GASGAS EC300, HONDA CR125R, HONDA CRF230 L, HONDA CRF230 M, HONDA CRF250 X, HONDA CRF250 X, HONDA CRF250R, HONDA XR250L, HONDA NX250, HONDA XR250R, KAWASAKI KDX200
EBC brake pads work and fit perfectly on my Crf250r. I definitely recommend.
EBC brake pads are pretty much all I use. Great price point and great value. I'm good for about 1 set of pads per year. However, some adverse conditions can cause them or any brake pads to were more quickly. REMEMBER: Brake pads take some time to wear in to get the grip you expect. Slow your roll for the first 15 minutes after the install. View detail
Fits: YAMAHA TY250RTY250, YAMAHA TX750, YAMAHA TDR80, YAMAHA TDR50, YAMAHA RZ50, YAMAHA RZ350RR, YAMAHA RZ350R, YAMAHA RZ350, YAMAHA RZ250RR, YAMAHA RZ250R, YAMAHA RZ125S, YAMAHA RZ250, YAMAHA RZ125, YAMAHA RZ125, YAMAHA DT90, YAMAHA DT50, YAMAHA DT50, YAMAHA DT50, YAMAHA DT250, YAMAHA DT200R
If you're going to replace it anyway.
Replaced from OEM Product.
I can't help but feel as if I have slightly powered up.
In terms of Cost, the difference is almost 4 times, so it is not so clear whether it is worth it, but in terms of Gold amount, it only changes a few hundred yen to a little over 1000 yen, so I think it is worth a try.
View detail
Fits: HONDA XR440R, HONDA XR440R, HONDA XR400SM Motard, HONDA XR400RT Acier, GASGAS MC250, GASGAS MC125, GASGAS FSE450, GASGAS EC515, GASGAS EC450, GASGAS EC300, GASGAS EC300, GASGAS EC300, GASGAS EC250, GASGAS EC200, GASGAS EC125, GASGAS EC125, GASGAS 450 Fse, BETA SM450, BETA SM400, BETA RS450
Does it feel like the back of the OEMPad works twice as well?
[How is it used?
I have used the vehicle for 3 years and 10,000 km since purchase, and thought that the pad installed at the time of purchase must be worn out by now, so I replaced it.
It was rumored to work well in certain places, so I decided to go with this Pad, although it is a bit expensive! 。
How was your experience with it?
The initial Touch is what? The initial Touch is so gradual that you may think, "What is that? It is not suitable for those who are looking for an effect that starts up quickly in the early stage.
However, as you tighten your grip on it, it starts to work.
I used to Brake with two fingers on my previous Pad, but now I can do my normal deceleration with a slightly stronger grip, even with just one index finger.
However, it requires Stroke to work (because it is OEMHose?). So, it takes more grip strength than expected.
How did it compare to other products?
The pad installed at the time of purchase was presumably HYPERSintered by DAYTONA.
The braking force was satisfactory enough, but the effectiveness has been further improved compared to that.
Durability will be verified in the future.
[Points to note]
When replacing the pad, it is better to clean the caliper and grease up the slide pins.
The wear and tear of the Rotor must also be checked.
View detail
Fits: KAWASAKI KLX250SR, KAWASAKI KLX250R (for competition), KAWASAKI KLX250ES, KAWASAKI KLX250R (for competition), KAWASAKI KDX250SR, KAWASAKI KDX220SR, KAWASAKI KDX220R (for competition), KAWASAKI KDX200SR, KAWASAKI D Tracker, KAWASAKI KDX200SR, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KX250F, KAWASAKI KX250F, KAWASAKI KX250F
Sprocket also ordered Gold
I ordered Gold for both Chain and Sprocket.
I'm not sure if the color is what I expected…
It is Orange-like Gold!
View detail
Fits: Others , YAMAHA DT230 LANZA [LANZA]., SUZUKI STREETMAGIC110 [Street Magic II]., SUZUKI RMX250, SUZUKI RMX250 S, SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESS 110 [ADDRESS]., KAWASAKI KDX125 SR, HONDA LEAD100 [Lead]., HONDA FORESIGHT [Foresight SE]., HONDA CRM250, HONDA CRM250 R, HONDA CRM250 AR, YAMAHA YZ250, YAMAHA YB50, YAMAHA RZ50, YAMAHA MINT [Mint]., YAMAHA GRANDAXIS [Grand Axis]., YAMAHA EXCEL [excel]., YAMAHA DT50
Good vibes
It's clearly gotten more powerful under 3000 RPM! View detail