Reviews
Fits: Others Universal, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLDOR, HONDA HAWK11, HONDA CB1100EX, HONDA CB1100RS, HONDA REBEL1100, HONDA CBR1000RR-R FIREBLADE, HONDA CB650R, HONDA CB1000R, HONDA VFR800F, HONDA CBR650R, HONDA CB1000 SUPER FOUR, HONDA CBR900RR, HONDA X11, HONDA VFR, HONDA X4, HONDA CBR1000RR, HONDA CBR600F, HONDA VRX
gargantuan
[How is it used?
I bought this because my 3 year old DAYTONA Motorcycle CoverSIMPLE LLSize (https://www.webike.net/sd/23823142/) had reached its limit. I was going to buy another DAYTONA, but it was late in coming in, I chose this one which was in stock.
Was the one you received as per Image?
It is just as shown in the Image. I think you will receive the same contents no matter which Cover you buy under 5000yen.
How was your experience with it?
I bought a 3L after checking the fit model, but it was too large for my ZX-7R.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
If it lasts 2 years, I won't say anything. The price is the price. I expect it to be durable against UV rays.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Motorcycle covers should be inexpensive, but it is a good idea to buy a new one from a well-known manufacturer in 2-3 year cycles. It doesn't matter what you use when you leave it outside.
View detail
Longing for Separate handle
CB400SB (2014) The LeftRight Switch Box has a small protrusion on the vehicle's LeftRight Switch Box. The LeftRight Switch Box of the vehicle has a protrusion, so it is necessary to drill a hole in the handlebar side. It was a large problem to decide the drilling position while adjusting the Master Cylinder and Brake hose so that the handlebar end would not hit the tank when cutting all the way off. I really wanted to use a separate handle, but I am satisfied that the cowl position, hose, wires, etc. were all installed as OEM. View detail
I am satisfied
I bought it because I needed it for Circuit's Regulation.
I am very satisfied with the affordable price.
View detail
I knew this was easy to use.
The fabric is thicker and has some stiffness compared to the Simple made by DAYTONA, which I bought last time, but I prefer this one because it feels more protective.
It is easier to have a belt sewn to the cover to prevent it from being rolled up.
The size is a little bit oversized around the rear, but I think the 3L size is good because it can wrap around the entire motorcycle.
View detail
It's worth the price
I think it is a good product. The only thing that bothers me is that the hole for the lock in the back is hard to find. My concern is that it will deteriorate over time. View detail
Easier to obtain at a lower price than OEM
[How is it used?
I used to change Filter every two Oil changes, but since Oil is changed every 3000 km or so, I feel that Filter every three times is sufficient.
How was your experience with it?
I have never had an oil leak from the filter, nor have I ever had foreign matter mixed in with the replaced oil.
There is no particular problem, or perhaps there is no product other than a defective product that has a visible problem due to the nature of its components.
How did it compare to other products?
I saw a Motorcycle Youtuber who disassembled OEM and other brand product filters of major manufacturers and compared the internal filter area, etc. He concluded that OEM is the highest quality.
Considering that the difference is less than 1000 yen, I think it is a good idea to choose OEM.
It is a subtle point when considering availability and the need for such high quality.
[Points to note]
Never tighten too tightly.
It would be disastrous if the Screw threads were broken by using a tool and tightening it hard.
View detail
Fits: KAWASAKI W800, KAWASAKI W650
There is a difference from the product image!
Exhaust System installation plate is different from the picture lol
Install with a generous heart.
Ant distortion
The sound quality is very good.
View detail
Fashion.
Good for those who prefer a thicker grip.
I thought the Grip feeling would be nice.
Look at it, look at it ^_^.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
Heavy, but sturdy and waterproof seems perfect
The first impression is "heavy" It was. But I would describe it differently:sturdy, thick fabric, waterproof, and perfect as claimed.
However, I just bought it, so I can't say for sure, but it will probably be Large sturdy.
Due to the weight and the thickness of the fabric, it takes a little time to put it on the motorcycle, but that is understandable because it is solid.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
sv650 is 2L
I bought a L because the fit guarantee said L, but when I put it on, it was BitchBitch's tight-fitting.
It took a while but they accepted the return and repurchased the 2L.
Easy to detach and attach.
Rain does not soak through.
It certainly does not dissolve when attached immediately after an Engine stop.
Good
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
Ease of use is the best
Can be used immediately after returning from touring.
Easy to install and remove
I was looking for a product that satisfied the above two points and found one that looked just right, so I popped it in.
From the results, I'm really glad I bought it.
It is very easy to put on and take off, the cloth is firm, and I am very satisfied. It is a bit pricey, but if you think you can use it for a long time without Stress, it is rather cheap…?
I bought it when I bought a new Motorcycle, but I wish I had bought it sooner.
View detail
Engine bars.
I ordered these engine bars for my Kawasaki w650 as the were mot to big and looked OK. I'm so glad I went with them as they were an easy fit and don't look out of place. I would recommend them. View detail
Defective item
It was a molding defect with a tumor-like bump inside.
I had no time to return or exchange the product, so I had to go through a lot of trouble to remove the bump and install it, but I was disappointed with the quality of the product, which was less than Chinese for the good gold price.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Easy-to-use Motorcycle Cover
It is smooth and easy to use. It is just a little disappointing that there is no aperture so it is easy to get wound up. I think Y's Gear might be better in that area. View detail
Fits: YAMAHA MT-07, HONDA CBR250R, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI GPZ900R, YAMAHA YZF-R25, YAMAHA YZF-R3
They're not the same color
I bought this because I thought it was the only way to get the Setting out of MT-07's NORMAL front suspension.
The suspension was originally small and did not absorb impact at all, so using this suspension only made it stiffer.
At some point, I noticed that One Side was missing and ordered the same thing from the Manufacturer.
But the item received was not at all the same color as the original.
Manufacturer is selling this as Gold, but it was so far off the mark that they are now dealing with Objection.
I tried to upload the photos, but for some reason an error prevented me from doing so, so I'm sorry I can't show you the details.
View detail
super
ultimate offer if you need to rebuild your wheel shine and solid spokes, inner and outer spokes are separated polishing friendly View detail
Cost-effective Wave Disc (for Right)
When the front brake is applied while the motorcycle is moving and the driver tries to stop Kunkkkkkkkkkkkkkkkkkkkkkkkkkkk." and Breaking felt uncomfortable and the DISC was found to have uneven wear.
We chose the said disc because it is cosmetically good and just as the Point can be expensive.
This was my first time using Wave Disc, so I was half worried about how it would look and feel, but Brake worked well and looked surprisingly Parenthesis good.
However, I think there are different tastes when it comes to appearance, so I will post a picture for your reference.
View detail
Fitted with 520Conversion of Zr-7
I installed 36T with 520Conversion in Zr-7.
I have not researched it in detail, but I think the only 520Sprocket for Zr-7 is lineuped only by SUNSTAR. I would be very grateful if there is a 520 setting since it is an old motorcycle.
Before the replacement, I had a 525 OEMSteelSprocket, so the 520 Duralumin is laughably light. And of course, I feel more nimble when I roll my Motorcycle.
Life may be inferior to Steel, but I personally find it acceptable because I think Large is what you get with lighter weight.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI ZRX1200 DAEG, KAWASAKI ZX-8R, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZXR750R, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1300, YAMAHA YZF750SP, YAMAHA XV250, MOTOGUZZI Le Mans 1000, YAMAHA XJ600S, YAMAHA XJR1200R, YAMAHA FJ1200A, YAMAHA V MAX 1200, YAMAHA FZR400RR
Not bad, but …
I bought this as a cover for my Ducati Deer Bell v4, and although the size is exact, it is hard to tell the front from the back, and the SeatBack is wet, so I think the waterproof property is not so good. View detail
Cospa is good
Smartphone Holder is using RAM Mount.
This type is the best looking and the best way to fix it without getting in the way, so I use this type for all my motorcycles.
View detail