Reviews
Fits: DUCATI HYPERMOTARD 939 SP, DUCATI XDIAVEL S, DUCATI MULTISTRADA 1200 DVT S, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1200 DVT ENDURO, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V2 S, DUCATI STREETFIGHTER V2, DUCATI PANIGALE 899, DUCATI PANIGALE 959, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE V2
I love it, but...
I like the texture and design.
Even when tightened to the end, the inner groove on the clutch cover side? The edge of the O-ring seems to collide with the edge of the cap side. The edge of the cap side seems to collide with the inner groove of the clutch cover side even though it is tightened all the way. I am worried about the OIL blotch. I am worried about OIL seepage when I use it from now on.
If it's not there, it's not a problem.
View detail
It was EXACTLY!
I purchased this to replace an OEM Oil cap groove that was broken.
It was Exactly in JA10!
View detail
As expected of DAYTONA
Was the installation difficult?
pimping
How was your experience with it?
It's going to look different
View detail
Fits: DUCATI PANIGALE 899, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199
Standard Custom
About 5 cm higher than OEMScreen? It's about 5 cm taller than the OEMScreen, so it's more effective Large on the highway and looks better. I'm not a CircuitUser, but I'm satisfied with Large. View detail
It's probably for the best.
Everything is in balance.
There is no uncertainty whatsoever.
View detail
Dress-up in a casual way
It can be dressed up casually.
I am satisfied with the quality of the product.
It would be better if it were a little cheaper.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, KAWASAKI ZX 14 R, KAWASAKI ZX 10 RR, KAWASAKI H2R, KAWASAKI ZX 10 R, DUCATI 1103 V4 Panigale, APRILIA RSV4 APRC, TRIUMPH Street Triple RS 765, MV AGUSTA F4 RR 998, KTM 1290 Superduke R, MV AGUSTA F4 1000 LH 44, HONDA CBR 1000 RR SP, DUCATI X-Diavel S, DUCATI Multistrada 1200 S, DUCATI Monster 1200 S, DUCATI 1299 Panigale, DUCATI Monster 1200, DUCATI 1260 S Multistrada, DUCATI 1199 Panigale Superleggera
Compare with Yamaha Brembo
I was not dissatisfied with the performance of the Yamaha Brembo on the YZF-R7, but there was no lever available to install the REMOTE CONTROLLER, so I had no choice.
Installation, but requires Bullet Terminal processing and Nipple modification on Switch.
Since OEMWiring is a Connector, it is cut and converted to Bullet Terminal, and the RCS side is also cut and shortened.
The Nipple seemed to be able to go as it was, but the Hose needed to be bent 90° and it was too tight, so I changed it to Straight.
The nipple diameter of the RCS is 7mm, but the OEMTank is 8mm, and the RSC side is governed by the 8mmHose, so the 7mm is forcibly installed.
If you are particular, you should buy a 7mm Tank.
The Yamaha Brembo has a banjo on the side, so I used an offset adapter, but the RCS can go without it.
The Chinese $3,000 REMOTE CONTROLLER came on with no problem. The REMOTE CONTROLLER is easier to adjust even if it is not Race.
There is almost no difference in structure between the 16mm Radial Yamaha Brembo and the 17mm Radial RCS, so I don't feel any difference in performance, although the price is about twice as much.
I chose RCS for the REMOTE CONTROLLER, otherwise Yamaha Brembo would have been sufficient.
View detail
The oil filler cap is very convenient to use and decorate
Daytona brand is a famous brand in the production of spare parts for motorbikes from engines to decorations. In particular, the product set of oil cap, reservoir cap and bar ends comes from Daytona premium, I feel the quality is improved compared to normal Daytona. With this set of oil caps, compared to the original cap, I find that it is not only used for decoration with many colors to choose from, but also can be easily opened and closed to make changing the oil easier. With a normal OEM oil cap, I usually spend about 2 to 3 minutes opening and closing the oil cap. With the Daytona oil cap, it only takes 30 seconds to do that. View detail
Fits: DUCATI DESERTX, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 1100EVO, DUCATI DIAVEL 1260S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950 RVE, DUCATI HYPERSTRADA 821, DUCATI HYPERSTRADA 939, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI MONSTER 695, DUCATI MONSTER 1000, DUCATI MONSTER 696, DUCATI MONSTER 750
It's nice and casual.
It's nice and casual, the texture is okay. View detail
Oil Filler Cap
Changed to Green Light or Gold. View detail
Blue empty parking.
Used for DUCATI 996.
I bought this because I am renting and park Blue empty, but I never want to let it rust because it is a rare car.
The rainy season is absolutely RECOMMENDATION.
It also has a hole for a lock, which is a little expensive, but it is a must-recommendation for those who park Blue empty.
View detail
Fits: DUCATI Multistrada 1200, DUCATI STREETFIGHTER, DUCATI 1098, DUCATI 1198, DUCATI 1199Panigale, DUCATI 1299Panigale, DUCATI DIAVEL, DUCATI Monster 1200, DUCATI Monster 1200R, DUCATI Multistrada 1260, DUCATI PANIGALE V4
Cannot be installed even though the car model is compatible.
The product cannot be installed even though it is compatible with the car model, and it just won't fit.
AELLA's other products also have high product prices but poor accuracy.
Future purchases are a consideration.
View detail
Black still seems to be vulnerable.
Used outdoors in full sun for less than 1 year and 2 months after purchase.
What was originally Black has faded and turned gray.
It also tore like a rip, so I had to use curing Tape to plug the hole for now. Is it still susceptible to deterioration by sunlight if it is Black?
I am using two more in parallel, Black and Silver. the Black is about a year old. It has faded a bit but still seems to stand up to the test.
I thought I was using them the same way, but I am wondering how a difference of two months can make such a difference.
Silver is about 5 months old. It is still clean.
I was lucky that the exhaust pipe was not touched.
Since the original price is over $8,000, it would be nice to have a little more durability. However, the Motorcycle Cover is a consumable item. However, Motorcycle Covers are consumable items, so I am not that dissatisfied with them since they cost around 4,000 yen at Sale and I prefer black. But I think I will get the Silver color next time.
View detail
Good design. However, the hexagonal hole is delicate.
Coloring and design are both cool and satisfactory.
However, it should not be used for frequent removal/attachment, as the hole slips easily due to the aluminum material and 3mm hexagonal hole, which is designed to emphasize design.
If there is a lot of removal and installation, I personally recommend Ducabike with 4mm hex holes.
View detail
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Caliper seems to drag less ….
There will be a slight impact on the push/pull of vehicles.
I feel that the Chassisisis sound when pushing the vehicle has become a little quieter and the resistance I was feeling has become lighter.
I thought the product was satisfactory to the extent that I felt it was.
View detail
Operability Up
Replacement from NisshinOEM.
From the initial touch, the softness of the touch is softer and the more you hold it in, the more it works, and I felt that the operability is much better than before.
I even regretted wearing it and wished I had changed it earlier.
View detail
Fits: DUCATI DESERTX, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 1100EVO, DUCATI DIAVEL 1260S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950 RVE, DUCATI HYPERSTRADA 821, DUCATI HYPERSTRADA 939, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI MONSTER 695, DUCATI MONSTER 1000, DUCATI MONSTER 696, DUCATI MONSTER 750
Custom in Red color Bartz
Black color body in Custom with Red color verts.
The number of small red-colored sections has increased again.
I was satisfied with the solid construction of the bars, the device was easy to use, and inexpensive as well.
Naturally, there is no change in driving.
View detail
Fits: DUCATI SUPERSPORT 939, DUCATI DIAVEL V4, DUCATI STREETFIGHTER V2, DUCATI XDIAVEL S, DUCATI SUPERSPORT 950, DUCATI MONSTER 1200 S, DUCATI MONSTER 1200, DUCATI XDIAVEL, DUCATI DIAVEL 1260, DUCATI MONSTER 1200 R, DUCATI DIAVEL 1260 S, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI DIAVEL 1200, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1260 S, DUCATI MULTISTRADA 1260 PIKES PEAK, DUCATI MULTISTRADA 1200 S, DUCATI MULTISTRADA 1260, DUCATI MULTISTRADA 1200 DVT, DUCATI MULTISTRADA 1200 DVT S
Custom in Red color Bartz
Custom in Black with Red color inserts on Black body.
The construction of the barts is precise, rigid, and unsatisfactory.
We did not get any change as far as driving, but we are happy with the look.
The replacement requires a variety of tools and effort, but the look is much tighter.
View detail
Fits: DUCATI 899Panigale, DUCATI 1199 Superleggera, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale, DUCATI 1199Panigale R, DUCATI MONSTER1100EVO, DUCATI MONSTER 1200R
Custom in Red color Bartz
Black color body in Custom with Red color verts.
Since the Barts are only four Smallish Anodized Screws from Windshield, they don't look much different.
Naturally, there is no change in driving.
It was an investment for complete self-satisfaction, but even a small investment like this will make a difference as it accumulates.
View detail
Genuine Brembo 17RCS Corsa Corta Master Cylinder
One of my customers is going to out this bike on the track so I went to work on the braking system. One of the first things I wanted to change was the annoying stock master cylinder. Obviously, Brembo was the way to go. I decided on this one as it fitted with the specs of the bike in mind. Finding the correct master cylinder was not hard but there were a few choices but I went for this one, the 17RCS Corsa Corta in the end. It had all the requirements I needed so it went in my basket. I had a few other parts and the shipping was reasonable for what I had. EMS got my order to me in 5 days. The master cylinder came with the standard stock lever length which was perfect for my needs. It is the 18 x 20 one so works good with teh floating calipers on the bike anyway. It came in the Brembo box and also came with a few copper washers. I had already sourced the HEL line that would make this all work. The master cylinder is a real piece of kit and fitted really well with the bike and the instrument cluster I was leaving in situ. Not a hard job once you have all the parts together. This master cylinder is awesome and so much better than the stock one. Oh and by the way, looks the nuts. There are just so many adjustments that you can definitely find the right setting for your liking. I do like the 18 ratio and H pivot setting. Very pleased with this part. Thanks Webike for the great service you provide. View detail