Reviews
Standard, no problem
It is a standard. No problem at all. View detail
Useful for cold season commuting
[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem.
View detail
Required for Northeast Number.
The grip is so thin and natural that you don't even notice it has been replaced. View detail
I am very grateful for this season!
My other car is equipped with a Grip Seater at Standard Equipment, and in the middle of winter, I have been benefiting from it, so I installed it on SecondMotorcycle as well.
As a result, WW could be a little warmer.
I guess the performance is a consideration for Battery capacity, etc., but if I had my wish, I would prefer a little more warmth...
The product looks and feels completely comfortable to hold.
Having said that, I have been able to spend this winter more comfortably than if I had nothing on!
View detail
For the price ….
I bought this because I changed the front and rear Calipers to Gold and wanted to have a consistent color.
Well, I believe it is less likely to deteriorate because of that….
Matching with GoldCaliper was a disappointment. I still think it would have been better to leave it in Black.
View detail
More than I expected…
I bought it for winter touring because I had some points left over and there was a discount campaign going on.
I can do electrical work and have replaced grips before, so I installed it myself.
Installation was easier than I expected, but it is safer to ask a store to do it if you are worried about the force required to press-fit the grips.
The key heat is effective at Plus temperatures, but not so effective at Minus temperatures. Well, it is better than nothing.
I have a Honda 400X with Honda OEM hand guard, so it is not directly exposed to wind, but even so, the effect starts to diminish from about 3 degrees Celsius.
It is better than nothing, but when I experienced HondaOEM's Grip heater on the 400X I rented from LenBarrel at HondaDREAM before, it was so hot that I could not grip it even at high speed in the morning in the middle of winter, and 2 out of 3 levels was enough.
This product does not get that hot even at max. 5 levels.
It seems that the temperature differs depending on the Manufacturer, and KIJIMA-made products seem to be lower than those of other Manufacturers.
Power is supplied from Honda OEM power supply coupler ACC.
However, the grip is very good, so I will give it an overall rating of 3.
Good points:comfortable grip and easy to install.
Five levels allow for detailed settings depending on the situation.
The bad:Not as hot as expected.
View detail
Genuine Honda Blank Key
I had an issue with the ignition barrel and snapped the key in the process. After a lot of pushing and pulling the key decided to snap, my bad. So I did not have to go and buy a totally new set of locks, I had an old set hanging around and decided I would get the lock set cut with a new key, this is where the new blank key comes in.I could have just got some random generic key but as this is an essential part that needs to work every time,I went for the genuine Honda one. The part number was not particualrly hard to find and Webike had these available. Win, win. The price was very reasonable and better than could have sourced locally. There were a few other parts in my order and all were shipped with EMS and arrived in 5 days. All my parts were received in perfect condition. The key even came in a small Honda bag which was a nice touch. The key has a really good and solid feel to it. Although it is a blank, the edges are smoooth as you would expect. I got the key cut and installed my new/old lock set. All works perfectly and now I can get my seat off. Thank you Webike, great job. View detail
On a 2011 CBR600RR.
I bought it because I didn't want to do thick Gloves in the winter.
The installation was done by Webike's Support store with direct shipping.
In the case of the CBR600RR, I gave up on it myself because it is Large strange to remove the FI side of the Accelerator Wire.
I have used it and it heats up so much that it is hot at the strongest Level.
My wish to use thin Gloves in winter was fulfilled as long as I warmed the back side of my hand from time to time.
There is no possibility of mishandling during Blinker operation.
View detail
Fashion.
Good for those who prefer a thicker grip.
I thought the Grip feeling would be nice.
Look at it, look at it ^_^.
View detail
easily control the throttle
I replaced the old grip on my Suzuki Hayabusa with Kijima grip rubber. The grip is soft and resilent I can easily control the throttle. Hight quality and good price compared to performance. View detail
NGK Iridium Spark Plugs for Honda CBF1000 2006
I was going to go for the standard OEM spark plugs for this service but when I saw the price of the iridium ones for the CBF1000, it was a no brainer to get these bad boys. These were easy to find using the tools provided by Webike and all the links to the manufactyrers websites.The cost was very good and purchased a set of 4.I have used iridium plugs before with great success as they seem to fire better than standard. I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice and snug. The plugs themselves are perfect. I have had some plugs befpre from overseas suppliers and generally, one of those had been a dud or just been broken during transit. Not this time. All 100% perfect and fired as they should. They do have a better performance than standard plugs but you would have to be a professional to actually notice the difference of the bat. Once fitted, the bike just feels smoother. Take your time and don't over tighten. One very happy customer. Thanks Webike View detail
Grip heater refill
I installed a replacement GH-10 that I had been using for 2 years, but it stopped working and during a Sale.
I was thinking of using something different, something made by DAYTONA or something with a separate controller, but I chose the GH-10 again because I thought the convenience of being able to operate it with a short push at hand could not be compensated for by the difference in price.
The Axel side is easy to install since it is integrated with the Throttle cone. The opposite side is difficult to install unless it is warmed up. Wiring is done by floating the Headlight in the back gap. It's still useful to have it from a little chilly season to winter.
View detail
Defective item
It was a molding defect with a tumor-like bump inside.
I had no time to return or exchange the product, so I had to go through a lot of trouble to remove the bump and install it, but I was disappointed with the quality of the product, which was less than Chinese for the good gold price.
View detail
Add on to Clamp on heated grips
Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips! I have good luck with most all webike products. I purchased 1 of these along with the associated heated lock grips for my wife's and my bikes. Installation was straight forward after watching the videos. Just had a chance to try them out over winter break with temps around 10C - 15C. They took a few minutes to warm up, but did a great job. We typically started on a setting of 2 - 3, then turned them off after our riding activity increased. Very warm, even through our winter gloves. Great purchase, happy wife!Would recommend! Fast shipping as always too.Thank you Webike. View detail
Easy to install, better than ManufacturerOEM
The switch is integrated with the grips for easy installation, requiring only wiring and no effort.
It is also possible to point it straight up to avoid touching it when operating the blinker. If you warm up the Heater to the maximum Large setting, you can easily pull out the Grip.
The thickness is just right for general OEMSize and is a non-slip Material.
View detail
Plug is consumable
Used for replacement on vtr250.
Plug on Front side is replaced by shifting Radiator slightly.
The Rear side cannot be replaced without removing the Tank.
It was Large strange, but it blew better after the replacement.
It's not Windshield IRIDIUM or anything like that, so it would be better to effect it on a regular basis.
View detail
very good. This is excellent in finish and quality
There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful I'm willing to install it on my other bike. View detail
Already the third one.
Every time I change motorcycles, I install a new grip heater, but this heater is the only one I use. The heater remembers the last Level, so it keeps the temperature at the right level. View detail
Wiring is Limit...in a way it fits.
This is the third KIJIMA Grip heater I have installed. The performance and cost performance are excellent, but the distance to the Right and Left Wiring connection points is short, and there is a fuse in that area, so I have to remove the tanketc. to get to it in case of emergency, which is a shortcoming.
The OEM grip for the CL500 is a type without a bar end, and this grip heater is compatible with this type, but this time I installed a Zita bar end plug, which fits well. The smallest part of the supplied throttle fits perfectly.
And when the Grip is aligned with the LeftHandlebar End, there will be a gap of about 3mm at the Handlebar Switch.
View detail
Basic performance is brought out.
I used it on an air-cooled 2Valve Kawasaki and it worked well, so I tried it on a V-TWIN MAGNA.
This is a replacement from an OEMPlug with 10,000 miles on it.
The bouncy Fee Ring is great!
View detail