Reviews
Fits: YAMAHA TMAX500, KAWASAKI ZX-6R, HONDA VTR1000SP, HONDA VTR1000SP, HONDA CBR600F, HONDA CB1300SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA VTR1000FVTR1000F FIRESTORM, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA400R, KAWASAKI NINJA650R, KAWASAKI ZZR1100/ZX-11, SUZUKI RGV250 (Gamma), YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FZ6-S2FAZER, YAMAHA FZ1FAZER, YAMAHA FZS600FAZER, YAMAHA TMAX500
Recommended Motorcycle Cover.
"Ease of installation. is the rating of the ease of applying Cover.
I am a Honda owner, and I have been using Y's Gear Motorcycle Covers for a long time, especially because of their durability, so I chose Y's Gear for this purchase as well (the reason for replacing it was because it was torn when it fell over due to strong wind. I had used it for more than a few years and it would still be in good condition if not for the fall). ) I am very happy with the quality of the product and the price.
Once again, using a new product, I have no complaints about the texture and feel of the material, which is firm yet soft. The price is reasonable, but considering the fact that it can be used for a long period of time, the cost performance is perfect.
View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
Used in GB350S
It is relatively inexpensive for a Manufacturer product and functions well enough for its needs.
The size of the cover is also exact, but the area where the exhaust pipe hits the cover is large and the cover itself is not heat resistant, so if you use it, be careful about this.
View detail
Fits: HONDA CBR600F, HONDA CBR600F, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR1000RR SP, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR, HONDA CBR600F, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600F4i, HONDA CBR1000RR, HONDA CBR1000RR
Disappointed by dents.
The packaging was fine, but I was disappointed when I noticed it after assembly. I decided to use it as it was since there was no problem in use, but I was really disappointed to see some dents on the Edge part. That's all I have to say. At any rate, I will never buy another SUNSTAR.
I posted it once, but it wouldn't upload, so I'm wondering if it got stuck on something?
View detail
Fits: SUZUKI COBRA, SUZUKI GF250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSX250FX, SUZUKI GSX250R, SUZUKI GSX250S Katana, SUZUKI GSX250R, SUZUKI GSX250SP, SUZUKI GSX-R250R, SUZUKI GSX-R250SP, SUZUKI GSX250R, SUZUKI NZ250, SUZUKI NZ250S, SUZUKI ST250, SUZUKI WOLF250, SUZUKI BIG BOY, SUZUKI WOLF200, SUZUKI GSX-R125, SUZUKI GSX-S125
Select L for G310R
[How is it used?
This is the Apartment's outdoor motorcycle storage area.
Was the one you received as per Image?
Yes
Was the installation difficult?
First time on a Motorcycle and first time on Cover, so the first time was a bit of a struggle, but no problem.
How was your experience with it?
I couldn't get the Seat to stick on the Exhaust System part right.
I put my hand on the Motorcycle with the cover on and stuck my hand in the right place....
No sidestepping.
[Included Parts:were they on?
Seat was attached to the Exhaust System part.
[Was there anything that disappointed you?
I knew that, but the Light of the key is Red, which is not good.
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
The rustproof pin is safe and the cap is Haxe, so it is easier to lick than Minus.
[How is it used?
Rusty Pad pin for replacement
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
It is safe from rust because of salt damage area.
[Included Parts:were they on?
Cap
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Helmet doesn't even hit the footpeg and looks good.
Used in STREET TRIPLERS 2020
This is the position where the Helmet does not hit the OEMfootpeg by hooking up the S Size of ARAI's RX7X.
I like the texture of the Plate, and I think it has the best pop-out and position. (Most aesthetically pleasing)
However, although it may not be limited to Babyface products, co-tightening with Tandem Footpeg was more difficult than I had imagined.
It took me a long time just to unscrew, pinch, and tighten the screws.
View detail
![Radial Brake Master Cylinder Kit [Vertical Φ19 Radial Pump Brake Master]](https://img.webike-cdn.net/catalogue/images/105373/79884_TS.jpg)
Fits: KAWASAKI Z1000 (water-cooled), YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP, Others
Very Controllable
Used on SV650X.
Since the OEM has a horizontal 5/8, the fit is 19mm, so it was installed.
I wanted to use the OEM Brake hose, so I bit on the Offset adapter.
The Hose could be installed without any difficulty at all, and the difficulty level of the work was at the beginner's level.
Brake switch is also changed from OEMNisshin to Radial masterNisshin,
Installed without tampering anywhere.
Air bleeding, which I had heard was time-consuming, was completed in 3 minutes because of the Breeder on the MASTER side.
As far as the ride goes, I was quite torn between this and the 17mm before I bought it,
As a result, I have a slight regret that I should have gone with 17mm.
Everyone will have their own preferences, but the reason I want to put on Radial master is,
Because I want to control Brake by the amount of grip, not Breaking by force,
Stroke wants to take plenty.
At 19mm, it was tighter than I expected, and I would prefer to be able to grip it a little more.
However, it is still quite different from OEM horizontal placement.
It is very easy to bed in while leaving a small amount of front brake.
I will buy a 17mm one of these days and give it a try.
View detail
Fits: KAWASAKI Z900, Others , YAMAHA WR250X, YAMAHA FZS600FAZER, YAMAHA FZ1 N Japanese specification, TRIUMPH DAYTONA675, SUZUKI GSR400, SUZUKI GSR750, KAWASAKI ZRX400, SUZUKI B-KING, KAWASAKI Z400, KAWASAKI Z1000, KAWASAKI NINJA650 , HONDA XR250MOTARD, HONDA PCX150, HONDA CB400SUPER BOLDOR, HONDA NC700S, HONDA CB1100, HONDA APE 100, DUCATI MONSTER1100
Wish I had purchased sooner.
I had been carrying a 15 LClass Back on my day-trip touring, but I felt completely different fatigue with this Back.
The correct answer to reduce Rider's burden would be to not attach anything to his body.
We feel that if this Gold amount would have made things easier, we should have purchased it a little earlier.
View detail
Fits: YAMAHA TZ250GP, YAMAHA TZ250, SUZUKI GSX-R750W, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R400R GK76A, SUZUKI GSX-R400R GK76A, SUZUKI GSX-R1100 GV73A, SUZUKI GSX-R1100, TRIUMPH TT600, TRIUMPH TT600, TRIUMPH TROPHY900 [Trophy 900]., TRIUMPH TROPHY1200, TRIUMPH SPEEDTRIPLE [Speed Triple]., TRIUMPH SPRINT ST [Sprint]., TRIUMPH SPRINT ST [Sprint]., TRIUMPH SPRINT [Sprint] RS, TRIUMPH SPEED FOUR, TRIUMPH SPEEDTRIPLE [Speed Triple]., TRIUMPH SPEEDTRIPLE [Speed Triple].
This is enough♪
It was time for a replacement, so I purchased Repeat.
I was thinking of using a Type above a top ranking, but...,
As a result, we decided to use the same Type as the previous one, which has a proven track record.
If you want to go to the Corner while leaving the Brakes behind, you can do so.
I would like to have just a little bit of Control...,
And that's good enough for me, overall.?
View detail
Fits: MV AGUSTA F3, MV AGUSTA F4, MV AGUSTA Brutale, BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 1299 Panigale, DUCATI SUPER BIKE 1199 Panigale, DUCATI SUPER BIKE 959 Panigale, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI MONSTER 797, DUCATI Monster Plus, DUCATI SUPER SPORT 939, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, DUCATI Diavel1260
Required for universalbrembo
This is an essential product for bremboUniversalCaliper. Without it, you can't get Center at all.
Kawasaki originally designed the Washer and installed it as standard OEM parts on a Level
Required.
I decided to go with Blue, even though it is $2,000 more expensive.
View detail
Fits: TRIUMPH Street Triple 675, TRIUMPH Daytona 675
I'm satisfied.
I was able to install it. How does it feel on a rainy day?
Also, to be honest, I didn't want to drill the holes with Drill, so I stuck it on at first with the adhesive tape that came with it, but still. Do you like the design or something?
View detail
Fits: その他 , DUCATI Scrambler icon, DUCATI 1299 Panigale, BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH street scrambler, SUZUKI Bam Bam 200, SUZUKI Bandit 1250, SUZUKI Vstrom 1000, SUZUKI Vstrom 250, SUZUKI Glass Tracker Big Boy, SUZUKI V-Strom 650
It looks cute and soothing!
I bought this to hide a Fastener scratch on my Tank and to prevent future scratches.
It looks cute and the fact that you can choose your own position for the back eyes is great!
I am concerned that it will get wet in the rain and fall apart, but so far I have been able to use it without any problems, partly because I have the Cover on!
View detail
Fits: KAWASAKI Z750 (water-cooled), YAMAHA MT-09, YAMAHA MT-07, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA TZR250, TRIUMPH DAYTONA675, YAMAHA TZR250R, YAMAHA XJR400R, YAMAHA YZF600 THUNDER CAT, SUZUKI SV650 (1999), YAMAHA TZR250, YAMAHA TRX850, SUZUKI GSX-R1100, YAMAHA XJR400R, YAMAHA YZF750SP, KAWASAKI KDX200SR, KAWASAKI KDX200R (for competition), KAWASAKI ZRX400, KAWASAKI NINJA650R
SKF Fork Seal Kit KITB-41K
The reduced sliding resistance can be felt when assembling the product.
I don't know how durable they are as I replace them every year.
Cost performance is not high.
View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
Motorcycle CoverSIMPLE L Size
I am satisfied with the price and ease of use. View detail
![Semi Radial Brake Master Cylinder Kit [Angle Horizontal Φ19]](https://img.webike-cdn.net/catalogue/images/105373/62411_TS.jpg)
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
It is over the price
I have installed this on a 2008 ABSMODEL CB400SB. The reason why I decided to install it on my CB400SB is that the OEM Master Cylinder is 15 years old this year and I thought it was time to change the overhaul to Semi-radial. This year's CB has a double disk, but since it is a single-press 3-pot, the time lag after the OEM lever is held is far from my ideal brake with a large time lag. I think it is a shame that the CB is equipped with a single-press caliper, because it eliminates the good qualities of the CB. (As I thought, the single push Caliper was still improved to opposing 4 pots when the Model was changed). I have changed various pads to improve the time lag and changed the brake fluid to BF4 from WAKOS to improve the time lag a little, but it is a characteristic of Caliper. But after I installed Nisshin's Semi-radial master, the time lag is gone and I am very satisfied with it. To be honest, I thought that Semi-radial would not be much different from OEM, but it is not at all. With the OEM master, I felt the front fork suddenly start to lag after I hold the lever, and then I felt the front fork start to lag suddenly! The Lever touch is much stiffer than the OEM. The price is not too expensive, and I am satisfied with the Large brakes because I have no more complaints about the Brakes over the years.
Here is the installation review
First of all, the brake switch will not be long enough, so wiring will be required. I also expected this, but if you are using a custom lever, you will not be able to use it. (I remember that Nisshin only offered Lever in Silver color in this Semi-radial, but there may be a Black color as well.) I think this is one of the best features of this Master Cylinder. The air bleed was very easy to do, which is one of the good points of this Master Cylinder, and I think it will take less than 30 minutes if you follow the normal procedure. If you hold the lever at an angle to the body of the car, the air in the Master Cylinder can be easily released.
I personally felt it was one more Review.
The convex part that holds the banjo bolt faces almost directly down, so the direction of the hose is limited to either directly above or directly below the bolt. In my case, because I have an ABSMODEL, it is impossible to use an external Hose, and since the angle of the banjo bolt cannot be changed, I ended up with a mounting position that puts a lot of load on the Hose, either directly above or directly below the bolt. The Hose is not designed to be installed directly above or directly below the Torque wrench, so the Hose would have to be installed directly below the Torque wrench. If the convex to hold the Hose had come out from the side, there would have been no burden on the Hose, so it would have been better to have the convex on the side like the OEM. (I plan to consult a Motorcycle shop at that time as the Brake hose is old and I plan to change it.) If you have a mesh hose and can change the direction of the banjo, I think you should prepare a diagonal banjo so that you can work smoothly. I had to re-grease the moving parts of the lever because they looked dirty. I thought I could see the Fluid if I changed the direction, but I didn't because it would have put a load on the hose. I have a water temperature gauge next to the inner cowl, but it is very difficult to see the tank. I used M10×1.25 bolt from Swage line.
View detail
Fits: TRIUMPH Adventurer, TRIUMPH America, TRIUMPH America LT, TRIUMPH Bobber Black, TRIUMPH Bonneville, TRIUMPH Bonneville Newchurch, TRIUMPH Bonneville SE, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100 Range, TRIUMPH Bonneville T120, TRIUMPH Bonneville T120 Black, TRIUMPH Bonneville T120 Range, TRIUMPH Daytona, TRIUMPH Daytona, TRIUMPH Daytona 595, TRIUMPH DAYTONA 600, TRIUMPH DAYTONA 650, TRIUMPH Daytona 675, TRIUMPH Daytona 675 R, TRIUMPH Daytona 675 SE
just right (time)
Many MotorcycleParts are expensive, but KIJIMA is Reasonable and helpful.
Even for such a small product, OEMs of foreign cars are expensive.
It is nice to see a wide range of car models available.
View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R6 S, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA XJR 1300, YAMAHA YZF 1000R, YAMAHA XJR 1300, YAMAHA XJR 1200, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZS 1000, YAMAHA FJR 1300, YAMAHA BT 1100, YAMAHA FJR 1300, SUZUKI Hayabusa, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000
Project Agro
Bought this, along with the clutch master cylinder as an upgrade on the stock items. Simple to fit and easy to bleed due to the top mounted bleed nipple. Great price from Webike, as cheap as some breakers are asking for second hand parts. If you want to upgrade your braking system you could do far worse than a RSC master cylinder. Recomended. View detail
Fits: DUCATI Hypermotard 1000, DUCATI XDiavel, DUCATI StreetFighterV4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 1200, DUCATI SUPER BIKE 959 Panigale, DUCATI SUPER BIKE 899 Panigale, DUCATI MONSTER 1100, DUCATI MULTISTRADA 1200 DVT, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 796, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI Diavel1260, DUCATI HYPERMOTARD 950, TRIUMPH Supersports Daytona 765, DUCATI Monster Plus, APRILIA SUPER SPORTS RS660
Titanium brakes
If Spacer and Washer are titanium, Caliper bolt must be titanium too. So I bought it.
Is there a change? If you ask me? But that's OK. Self-fulfilling.
Titanium is on it. It is fine with
Of course, there is strength, so there must be a slight change.
View detail
![MCP High Spec Bike Cover《Bike Guard》 [LL]](https://img.webike-cdn.net/catalogue/images/43895/MBC005_01_TS.jpg)
Fits: BMW K1300 S, BMW F800 S, BMW K1300 R, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA YZF-R250, YAMAHA YZF-R3, YAMAHA YZF-R6, HONDA CBR650 F, HONDA CTX700, HONDA CTX700 N, HONDA NC700 S, HONDA NC700 X, HONDA NC750 X, HONDA NC750 S, HONDA PS250, HONDA VARADERO 125, HONDA VFR1200 F
MCP High Spec Bike Cover "Bike Guard" LL
MCP High Spec Bike Cover "Bike Guard" LL I bought this to prevent the pranks, and when I didn't put the Cover on, I was quite annoyed. View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R6 S, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA XJR 1300, YAMAHA YZF 1000R, YAMAHA XJR 1300, YAMAHA XJR 1200, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZS 1000, YAMAHA FJR 1300, YAMAHA BT 1100, YAMAHA FJR 1300, SUZUKI Hayabusa, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000
Nice touch!
It is installed on an XJR1300C.
Caliper is NORMAL Sumitomo MOSCaliper, Brake hose is Stainless Mesh.
The brembo designation is 19Φ, so I have set it to 19RCS, but to be honest, 19Φ might be Large tight for MOSCaliper.
Especially if you include Mesh hose, it makes for a very gruff Brake.
Once you get used to it, it does not bother you at all, but if you want more controllability, 17RCS is recommended.
The brembo person also said that One sizeDown is not a problem.
If you plan to change Caliper to brembo 40mm, buy 19 because brembo designation is 19Φ.
For those who make RADIAL CALIPER, beware of Caliper's Piston system.
The 30mm same diameter 4PODDouble caliper is the recommended Size17Φ.
For 30/32 odd shapes and 32 same diameter, 19Φ is the recommended size, so check Caliper's Piston size.
View detail