Genuine Kitaco Exhaust Gasket for NSR250R

These were purchased due to changing the exhaust too many times in the past and the gaskets were not doing as they should. The correct part was found by simply searching the model of bike and the Kitaco gaskets came up in the search. As these have had good reviews, I decided that I would give these a try myself for this exhaust change. They gaskets were pretty good value and yes, they are only gaskets but they do need to be right. With some other parts in my order, I got them all shipped using EMS. The order arrived in 5 days from being shipped which is perfect. The gaskets came in the Kitaco standard packaging for this item and were well packaged. The gaskets themselves look to be really good quality and there were ne signs of any problems with the size or condition. Absolutely perfect fit and not a leak in sight. Very impressed with these gaskets and Kitaco is going to be one of my go to brands from now on. Great work Webike. Keep it up. View detail

Genuine DID replacement chain link

As I said before, I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERV7 is one I do not surrently have in stock so no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. These chains are generally used on tracxk bikes from a 530 or 525 conversion so I do use a lot of them. As you can imagine, I go through a lot. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail

Replace with new one

Fuel Hose seems to be deteriorating, when was the last time you replaced it? It was so long ago that I don't remember when I replaced it, so I bought it to replace it with a new one before it leaked.
It was a great help because it was a HondaOEM Product, the same thing, and not that expensive. View detail

For CB250F

.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail

Easy to grip due to its folded shape

I replaced the lever because it had been broken by a standing fender bender. I think it is easy to grip even for a person with small hands due to its folded shape. However, the quantity:Pair (for Left and Right) If you want to replace the Levers with different shapes, you should use the Quantity:Pair (for Left and Right) We recommend replacing the lever at the same time. View detail

Is there a problem with being thinner than OEM?

I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance. View detail

More rust-resistant than OEM Product

I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail

Maybe LL would be better for Z900RS people?

L makes it seem a little small.
If you make it LL, it's just right. View detail

FOR CB250F

I am happy to work with the webike team.Actually this item i could not found in my country (Mark, Drive Caution 87560MY1701). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail

Replace with new one

When the chamber is removed for maintenance and cleaning, the bush is replaced together with the chamber.
It is sold as a Honda OEM Product, and the price is not that expensive, so it is very helpful to be able to replace it with a new one. View detail

repapering

HRCSticker on the rear cowl.
I put a scratch on it, so I am repurchasing it because I can buy the same OEM ProductSticker.
Perhaps it is because it is not that inexpensive, but it is properly protected and packed with cardboard.
It helps that HondaOEM Product sells the same thing, but every time I buy it, I wish it were cheaper because it is a Sticker. View detail

Two years of use and still Large sturdy!

I used it on another vehicle with Blue empty parking for 2 years and it has worked fine with no problems except for some ragged loosening and fading of the fibrous material around the key for hole, so I bought a Repeat!
It is also useful for the Motorcycle body as it does not scratch easily!
I don't know because I have not used it in a dusty or sandy environment, but it works fine in an environment with Concrete and Asphalt floors. View detail

Large change

LargeThey are solid, and most importantly, they have a waterproof feature, which is great. I chose the size by referring to the size chart. I have done so in the past, but I tended to buy a Large size because I was worried about it. If I did so, all the lower part of the cover would be on the ground, and it would be difficult to put the cover on and take it off. Moreover, the cover itself gets dirty. This time, I chose a size a little longer than the overall length of my motorcycle, so it was just right. View detail

To match intake and exhaust system changes

MJ's position was raised due to the air cleaner element and the exhaust air removal Up. View detail

Rust-resistant Material from OEM:Replace with Stainless Steel!

OEM is prone to rust, so we replaced it with this product.
Cap is also included.
Material:I thought about Titanium, but it's too expensive Material:Stainless Steel
Quantity because Front is Double disk.:Buy 3 for 1 Set for 1 Vehicle.
The OEM cap can be removed with a slotted screwdriver.
This is very hard to loosen and almost nappy.
The attached Cap is a Hexagonal Wrench for peace of mind. View detail

Light and great design

Compared to the original footpegs, it is lighter in weight and has a high level of completeness in design.
There is no such thing as slipping off the footpegs while driving.
The angle is adjustable and installation is very easy.
The uncle-like feeling of the original footpeg disappears.
Installation is recommended. -------------------------------------------------- -------- The weight is light and the design is high compared to the genuine foot pad. There is no sliding or a buddha in the foot pagt while driving. The angle is adjustable and the installation is very easy. It feels like an uncle of genuine foot pagg. We recommend installation. Powered by Google Translator View detail

The final result was better than it needed to be.

Being able to set the Position is of course a good thing in itself,
In the non-standard half-positions, the foot is outward and uncomfortable because of the difference in step.
It is almost impossible to stick one's feet to the Heel Guard, making it difficult to ride.
I finally came back to the standard Position, so it was just Dress-up parts, which are useless and expensive. View detail

CODE AxleBolt

Purchased this product because I replaced the front axle with a KOOD one.
The coolness, design, and texture are very good, but the price is rather expensive, which is a little disappointing.
However, only Black is Material:I am concerned about whether the plastic will crack due to deterioration.
Repair Parts would be nice View detail

It's time to change.

It has been two years since the last installation, so I purchased this product so that I can replace it with a new one if it looks too bad at the time of maintenance.
If it doesn't seem that bad, we plan to keep it as a spare. View detail

It's good because it lasts a long time and is hard to handle.

[How is it used?
It was installed on the front caliper and rear caliper of a YAMAHA TZr50R under restoration.
I thought the Pat Pin was rusty because it was an abandoned vehicle, but it was in beautiful condition thanks to this product.

Was the one you received as per Image?
We disassembled Caliper and cleaned it lightly, but it was clean enough to be usable as is.
Once again, it was a good price to purchase the product, so it was helpful. I like that it is durable as a product.

Was the installation difficult?
For those who can tinker with Caliper, I don't see any particular problem.

How was your experience with it?
I can't get a feel for the performance, but it seems to be fine.

[Included Parts:were they on?
nothing special

[Was there anything that disappointed you?
nothing special View detail