Reviews
As expected of Nisshin, the braking power is also GOOD!
LEAD110 (JF19) I tried it out for the first time. I feel that the braking force and touch are better than those of the Normal pad, and the price is cheap and cost effective. I don't know about durability in the rain yet, but Caliper is also Nisshin, so I think it might be a good match.
I think the performance is sufficient for a Small Type Scooter.
View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
Sometimes it is more Large strange to remove an old OEMRubber.
[How is it used?
I purchased this product to do a little dress-up work on a long-abandoned LITTLE CUB after maintenance &restore had been completed.
Side StandRubber was installed in a high percentage of Honda cars in the 1980's and 1990's. Even when the ground was soft at the parking position, it was very useful because it was difficult for the stand to be buried.
The vehicle we acquired this time did not have any deterioration of Side StandRubber, but we changed Footpeg Rubber and Kick Pedal Rubber to Brown as well as Refresh, so Side StandRubber was also changed to Brown.
Did you receive the item as per the Image?
Since they are the same brand, both Footpeg Rubber and Kick Pedal Rubber are Brown, and I am self-satisfied with the color.
Was it difficult to install?
Less difficult, but the old Side StandRubber won't come off!
The mounting part was deformed, and the rubber was firmly wedged in the rubber due to rust, so it took a long time to come off, even though I sprayed oil spray all over it.
After removal, the deformation of the mounting area should be corrected, the rust prevention process should be performed, and then the mounting procedure should be reversed to complete the process.
Older vehicles or vehicles that were ... in storage conditions may have a hard time.
How did you like it?
The functional part of the product is the same as the OEM, and it does a good job of preventing the sinking of STAND.
The number one effect is. They're pretty to look at." It is a modest and unobtrusive part of the project, but it is highly self-satisfying.
Was "Included Parts:" attached?
Side StandRubber1pc. only.
Were there any disappointments?
As I mentioned above, it has the same effect as OEM and looks pretty enough to meet our expectations.
Other items that would be helpful
Point and hang of installation
As mentioned above, for some vehicles, removing the originally installed OEM parts can be a tedious process. 'A simple job to remove OEM Parts and install this product' It is
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...?
Well, if you are buying this product, you know which Parts to replace, so I don't see any problem.
[Notes]
Depending on the condition of the STAND section of the vehicle, force may be required, so please be careful not to injure yourself.
[ITEMS TO BUY TOGETHER
Footpeg Rubber and Kick Pedal Rubber are also sold by the same KIJIMABrand, so it would be fun to enjoy color coordination.
Whether you want a unified look or dare to use RoseRose's colors, please fully demonstrate the buyer's Sense.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
Vehicle Inspection Measures
NORMAL H4 will pass vehicle inspections, but for further peace of mind, 60W is labeled as equivalent to 100W.
Highly efficient Type was selected.
I measured the illuminance with a smartphone app and saw that it was up about 20%.
However, the H4 was used for years before replacement, and even if it is NORMAL, replacing it with a new one will pay for itself.
I also think it will increase illumination.
Because of its high efficiency, we are concerned about its durability and would like to evaluate it in the future.
View detail
Fits: SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, HONDA FORZA Z, HONDA FUSION, YAMAHA RZ250, YAMAHA RZ350, YAMAHA TZR250, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ600, YAMAHA XJ600, YAMAHA XJ600, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XZ400, YAMAHA XZ550, YAMAHA YZF-R1, YAMAHA YZF-R6
It's bright
It shines very brightly and far, but does not illuminate the bottom very well.
Should I adjust the angle a little?
CYGNUS has a light at the bottom of the body, so I thought I had to up the memory by about 2Memory, but it turned out to be a bad idea.
The previous Today I was on had a Light on top of the body, and even then it wasn't very well lit underneath, so I'm not sure if that's the way it's supposed to be.
It is bright even on low, so if you don't pay attention to the distance between cars, you will naturally become an agitated driver lol.
During installation, the needle gold that holds the valve in place came off, and I couldn't figure out how to install it, so I spent about 30 minutes doing the "pusher-pusher" thing.
View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
With Impact
I put it on my AC09 JAZZ and it was EXACTLY! View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
mounted on my littlecub
Nice little detail that immediately catches the eye If you want something nice for your littlecub and little money I can recommend this one. You have them in different colors View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
If you choose one for reliability, you have one choice.
I didn't think of any other manufacturer because my previous car was also equipped with Mats Stripe.
The OEM and durability of the W series are good, and I hesitated to replace it, but I thought that I wanted illumination on dark night roads such as mountains, so I did not hesitate to choose this product that I had a good feeling so far.
After all, it became easy to drive on the road at night.
The color of the Valve is not habitual, and it illuminates with natural color.
It's easy to install, durability is as good as OEM, illumination and visibility is up, and it looks clearer than a bad White type.
We considered the slightly higher price to be insurance because it is carefully manufactured Made in Japan.
If you want to be safe on the road at night, this is the Valve of Recommendation.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50PRO, HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CRM50, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA FTR250, HONDA MBX50, HONDA MT125ELSINORE, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50
I replaced it because it was OEM tattered.
I just put it on and it was pretty easy to install. The texture looks better than OEM Product. The custom look and feel is also good. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50PRO, HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CRM50, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA FTR250, HONDA MBX50, HONDA MT125ELSINORE, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50
It didn't fit.
CT125. You can't use it for the CT125, though it will hit in a search for View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50PRO, HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CRM50, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA FTR250, HONDA MBX50, HONDA MT125ELSINORE, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50
It is the installation other than the compatible car.
I made a Bracket for the APE because it looked so cute. I made a Bracket for my APE. View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
Recommended for Halogen
The OEM light valve of SEROW250 ran out of bulbs, so I installed it.
I ran out after just under 60,000km, so I'm happy to replace it when it gets over 50,000km.
Compared to the OEM, it's about three times brighter and a little more white-colored.
It is recommended as a Halogen bulb because of the perfect quantity and quality of light, but if you are aiming for more light quantity, it is not enough.
I don't know how durable they are yet, but I expect them to last as long as the OEMs.
View detail
Fits: HONDA Spacey 250, HONDA FUSION, HONDA FREEWAY, HONDA FREEWAY 250
I am generally satisfied with the premise that we don't demand the quality of the OEM Product
Judder came out at the time of starting soon after installation, Rose once and chamfer the Shoe side and Outer side with Sandpaper. (Assume.) But when I assembled it and repeated the start and stop several times, the Judder came out again. View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
Removing the OEM is the Large Variant Series
I installed it on my LITTLE CUB. It's insanely cute!
I'm happy with the way it looks.
Just a problem, OEM removal is stiff!
It was hard to remove the OEM that had hardened and stuck over the years.
View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
My favorite
It's a great attention-grabber, and if you install it on the CROSSCUB110 and CROSS CUB50, it's going to be great! It's lovely! And the old
I've been approached by the gals, by the neighborhood ladies, and by old men
View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
There's no doubt about it, Japan
Brightness, light distribution, ease of installation depending on the high precision of the product, etc.. It is
There are no messy parts and the durability lasts until you forget when you replaced it
Compared to other manufacturers, even the standard products are made exclusively for motorcycles It is a first-class product that you can be sure to use
View detail
Fits: SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, HONDA FORZA Z, HONDA FUSION, YAMAHA RZ250, YAMAHA RZ350, YAMAHA TZR250, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ600, YAMAHA XJ600, YAMAHA XJ600, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XZ400, YAMAHA XZ550, YAMAHA YZF-R1, YAMAHA YZF-R6
I don't know what it is
I specified the make and model of car, but when I installed it, the claws didn't fit! In the end, I broke the claw in one place and shaved it off I looked at the compatibility list of the product I received, but it was not mentioned Maybe it's the wrong year? I know I wrote all the bad things about it, but I think it performs just fine! View detail
Fits: HONDA VF400, HONDA NS400, HONDA NS250, HONDA CL400, HONDA CBX250, HONDA CBX250, HONDA CBR600F, HONDA CB125, MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, KAWASAKI KLX250, KAWASAKI GPZ400, SUZUKI volty, SUZUKI volty, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma)
It is a very good valve
Compared to OEM, White has become stronger and brighter.
It's about 20 minutes working time.
Giving greed ,,,
Since it is not an LED, if it is a little cheaper ,,,,
View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, KAWASAKI KLX250, KAWASAKI GPZ400, SUZUKI volty, SUZUKI volty, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400
Super shock resistant HDSpec. Expected
Halogen bulb manufactured by Absolute exchanged two years ago has reached the end of life, and super vibration proof HDSpec. I bought a super clear of M & H pine Stripe company in touch.
The brightness is slightly inferior to Absolute, but the color of Super clear is not bad. Life wants to work hard for about 4 - 5 years.
View detail