Reviews
Fits: YAMAHA YZF-R25, SUZUKI Hayabusa, SUZUKI GSX-S750, SUZUKI SV650X, SUZUKI Gixxer 250, SUZUKI V-STROM250, KAWASAKI Z900RS, KAWASAKI ZX-10RR, KAWASAKI Z650, KAWASAKI Ninja250, KAWASAKI W800, YAMAHA YZF-R3, YAMAHA Tenere700, YAMAHA XSR700, YAMAHA SR400, YAMAHA TRACER900, HONDA rebel1100, HONDA VFR800F, HONDA CB1100, HONDA CRF250 RALLY
Essentials for Overnight Touring
Lost my HalfCover that I used for 6 years last year on a touring trip, and purchased this product because the previous one, a necessity in case of open-air touring, was discontinued.
As I had expected, I will use it without the Pannier case, although the width of the Rear is not enough for Shinobu Sen with the Pannier case attached.
The half has a string fastener at the center and a quantity fastener closer to the rear.:Pair (for Left and Right) It has a D-ring in one place. I think you need to prepare a clasp.
The fabric is thin, lightweight, and easy to handle.
View detail
Mounted on 24TENERE
I wanted a link guard and chose the same manufacturer's because of its compatibility with the Crash Bar.
It can be installed without any problems, but the installation of the Link guard is a mystery.
If you do not put anything between the skid plate and the link guard, the link guard will interfere with the skid plate when the vehicle is stopped (or when the rear suspension is extended). If you don't mind, it's not a big deal. I think you should use the included Wave washer to attach the Link guard, but there is no explanation in the official video at this time, so you will have to wait for the official announcement for the correct way to do it.
It seems to be possible to secure the clearance by shifting the skid plate itself forward, or shifting only the link guard forward, or putting a washer between the link guard and the skid plate, but if you are running, you will hit something and bend it anyway, so I bent mine with a MONKEY. I bent mine with MONKEY to prevent it from hitting anything.
Also, the bottom of the Link guard is about 15mm lower than the Link, so the minimum ground clearance is lower by that amount. I would like to see how it looks from now on, and I think I would like to fill in the Clearance there.
The texture of the product itself is good, and the material is quite sturdy compared to OEM. The scope of protection is Quantity:Pair (for Left and Right) The rise surface of the "L" is increased for the Large size, but I'm not sure if it is that much different.
I am hoping that the less holes than OEM will reduce the amount of mud on the engine.
View detail
I was attracted by the Gold color and bought it, but… I was not sure if it would work or not.
I tried replacing it with a Gixxer 250 Rear pad, but the braking force is much weaker than OEM and relies on the Front brake. it may be a compatibility issue with Caliper, but I can't get used to it, so I'm going back to NORMAL. View detail
Fits: Others Universal, HONDA CRF1100L Africa Twin, HONDA V-TWIN MAGNA, HONDA SHADOW400, HONDA SHADOW750, HONDA SHADOWCustom, HONDA Shadow slasher, HONDA SHADOWPHANTOM, HONDA STEED400, HONDA STEED600, HONDA VTX, YAMAHA Tenere700, YAMAHA NIKEN GT, YAMAHA BirdCity300, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100, YAMAHA DRUG STAR CLASSIC400, YAMAHA DRUG STAR CLASSIC1100, YAMAHA ROYALSTAR1300
Discreet Black is good
Purchased for Vf1100s. View detail
Replaced with a new part
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
Fits: Others , SUZUKI DL1000 V-STROM1050, YAMAHA TENERE700, HONDA CT110, DUCATI SCRAMBLER, SUZUKI V-STROM250, BMW R1150GS, KAWASAKI NINJA250, YAMAHA XSR700, HONDA CB400SUPERBOLD'OR
Doppelganger indeed.
As you would expect from Doppelganger, a Quality called Doppelganger.
I used it for camping touring with SPACY100.
Waterproof was perfect, did not flood at all, even when driving in a downpour.
The capacity also put the Tent in the Left and the cookware in the Right.
Installation is also easy, as all you have to do is adjust the length of the three Belt pieces and insert them into the Seat.
I used it with Tarpaulin Side Bag and it was CinderellaFit without interfering with each other.
Quantity:Pair (for Left and Right) I felt it was easier to bend than usual, perhaps because I swung the center of gravity to the
View detail
It is easy to use
Brake Easy to grip and use as well as lever
It looks cool and perfect!
There was no XJR400R setup, so I replaced it with an FZ1N Bracket.
I changed the adjuster from M10 to M8 with Recoil.
A dress-up adjuster is attached.
View detail
O-ring is Garbage
I thought I read that TENERE fit up to 23, but I bought it.
No problems with installation, no interference with brake pedal etc.
There is no particular change in operability, but it seems to be easier to apply the ankle area to the vehicle body.
The other thing I would like to see is the appearance and the ability to put a lid on the Pivot shaft mounting.
There is nothing wrong with the accuracy of the product itself, but the weatherproofing of the O-ring that comes with it is very weak! I don't think it will last more than 2 months.
It is possible to substitute the O-ring fixing part with Tie Wrap. However, I would not use this material because it does not look good.:I have replaced it with a SiliconO-ring and am using it. So far there has been no deterioration.
View detail
I wonder if it's not a pimping?
It was not easy, as I had to shave a little and bend it with a heat gun. View detail
It could be installed on the 2024MODEL.
*Caution [The official Manufacturer's Compatibility List does not include the 2024 MODEL TENERE700! As of March 2024
Please read this in light of the above.
As it turns out, I was able to install it on my TENERE700 (2024MODEL) without any large modifications.
The position of the Screw hole is slightly gapped and may require modification in some cases.
The Exhaust Pipe Guard interferes with the installation, so the installation can be done by bending it slightly.
The distance between the Left Radiator and the LowerGuard is close, but the product itself is rigid and does not seem to interfere unless it is knocked down too hard.
Installation prevents the Shroud from becoming cracked.
View detail
Fits: Others , SUZUKI DL1000 V-STROM1050, YAMAHA TENERE700, HONDA CT110, DUCATI SCRAMBLER, SUZUKI V-STROM250, BMW R1150GS, KAWASAKI NINJA250, YAMAHA XSR700, HONDA CB400SUPERBOLD'OR
PCX160 8BK-KF47 Mounting on
Purchased for daily use such as shopping for two and for overnight touring.
The installation is done with multiple one-touch belts, so anyone can do it.
However, if the Belt to be installed is Quantity:Pair (for Left and Right) somewhat on Seat's buttocks as it straddles the
Interference.
The capacity is large enough to hold a helmet and many other items.
The waterproof property is also excellent, so rain will not be a problem.
The flap (lid) is held in place with magic tape to make it waterproof,
This guy is super powerful. (Lol) The one-touch is not easy to open and close.
However, it is unavoidable in order to maintain the waterproof function.
View detail
I'm too weak.
It was distorted when I fell and hit it.
With OEM, this didn't happen even if you hit it hard..,
View detail
Fits: YAMAHA MT-07, YAMAHA MT-07 Tracer, YAMAHA XSR700, YAMAHA FZ-07 , YAMAHA TENERE 700
Genuine GBRacing Cover Set for MT07 2016
Because this bike had a bit of an accident and was getting rebuilt, the customer asked if there was anything else they could add which would help protect it against any further mishaps. I do tend to suggest that GBRacing engine kits are the way to go and this was the case here. Finding the right set was not hard as I just used the search function on Webike and then for my own peace of mind, I cross referenced with GBRacing website. With a few other smaller parts in my order, I had them all shipped together to save on costs and all arrived safely via EMS in 5 days from being shipped. The box all arrived well padded and the covers were in their own little GBRacing packets anyway. This set comprised of just the generator cover and the clutch cover which is more than sufficient for this bike and how small it is. The covers are made of some kind of composite and not just plain old plastic like a lot of other companies use. These are tough puppies and do withstand a good knock and or scrape down the road. They really are the mutts nuts when it comes to engine protection. All the necessary parts needed were aleady in the packets so there is no need to go hunting for specific bolts etc. You can feel the quality of these covers from both outside and inside. There is even a nice little GBRacing logo perched inside a cut out on the covers. Good touch. The fitting was pretty straight forward. Just take your time and make sure you have everything at hand before you start and you will have no issues. I also tend to use a little copper slip for the bolts which stops them from becoming stuck in there if you ever need to change them out. Cracking job Webike, thank you for the help. View detail
safety
Used on a 23 TENERE 700. Arrived ahead of schedule.
There is no complicated structure, so if you have experience in DIY maintenance, etc., you should be able to install it without problems.
The connection to the exhaust pipe was deformed inward, but if you tap it with a hammer, it will go in, and the installation error of the hanger is within the range where it can be attached by pulling slightly.
If you remove the baffle, it sounds like a CUB without the baffle, so there are different tastes.
View detail
cheap
[How is it used?
Oil replacement once a year
How was your experience with it?
I don't have a measuring machine and I don't know what it feels like.
How did it compare to other products?
The appearance is like OEM is expensive.
Functionally, is the amount of Filter inside more than OEM? And?
Gold is inexpensive and the Brand is a classic, so I personally feel secure.
[Points to note]
I think it's about conformity caution.
View detail
DAYTONAOil Filter
I wanted to replace the oil and filter by myself, and after a lot of research, I found DAYTONA's products! I recommend it! View detail
Useful for cold season commuting
[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem.
View detail
Required for Northeast Number.
The grip is so thin and natural that you don't even notice it has been replaced. View detail
I am very grateful for this season!
My other car is equipped with a Grip Seater at Standard Equipment, and in the middle of winter, I have been benefiting from it, so I installed it on SecondMotorcycle as well.
As a result, WW could be a little warmer.
I guess the performance is a consideration for Battery capacity, etc., but if I had my wish, I would prefer a little more warmth...
The product looks and feels completely comfortable to hold.
Having said that, I have been able to spend this winter more comfortably than if I had nothing on!
View detail
Genuine Gilles Tooling Engine Oil Filler Cap
This was also another one of the aftermarket accessories I had been meaning to get. This was the Gilles Tooling Engine Oil Filler Cap. Like my previous Gilles purchase, this was found to be in the sale so I grabbed the chance and added to the basket. It was not too hard to find the right cap for my oil filler but I did have to use Gilles Tooling website for that information. No bother really. With the other parts in my order, I got them all shipped by using EMS and they always get my orders to me fast. This was no exception, 5 days from being shipped from Webike warehouse and my order was at my door. Everything was very well packaged and kept safe with a lot of bubble wrap which pleases me. The filler cap came in it's own Gilles box and was already well protected. The cap itself is a well machined part and just like the reservoir cap, it has super smooth threads and a set of 3 coloured rings you can choose which colour suits your bike best. As before, choose well as you will not be getting the coloured ring out once you have it place without making a mess of the ring and the cap. With this cap and thre reservoir cap fitted it just ties in the Gilles stuff which is nice. The bike looks very sweet now and I am one very happy customer. Thank you Webike.n View detail