Easy installation, no brightness problems.

Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness. View detail

Very common EXGaskett

CROSSCUB110 (JA45) Used to replace the Exhaust System of
I think Gasket is the same for all Manufacturers.

No exhaust leak etc.

It was cheaper than OEM Parts. View detail

The size is just right and the texture is good.

Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner. View detail

APE 100

[How is it used?

Was the one you received as per Image? Yes

Was the installation difficult? No

How was your experience with it? Sounds good

[Included Parts:were they on? Stop lamp (Red)

[Was there anything that disappointed you? I wanted Gasket to be included.

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

Oil Filter for Grom KITACO's Clutch cover

Recommendation for those who use Grom KITACO's Clutch cover.
I replace Filter every two times, but I buy in bulk because it's a consumable item. View detail

Acceleration Up

15T→14T for acceleration up.
I thought I would lose fuel economy, but it ended up being better because it was easier to get on Speed! View detail

HURRICANE triangular table spindle nut

Exquisite workmanship, cheap price, good materials, beautiful colors, very accurate size, easy to install, and fits perfectly in the car View detail

Brake Pads for Street Riding

I purchased and installed these Brake Pads for my Ninja 250SL for urban driving (commuting). The cost performance is unquestionably good, but it is still a bit expensive. "Red Pad. Compared to the OEM Brake Pads, the Brake Pads are more controllable and cost-effective, so we recommend these Brake Pads to Mainers who drive in the city. View detail

WhiteLight and good looking!

It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light. View detail

Bright and low power consumption

I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling. View detail

XG250 TRICKER

I use it on my XG250 TRICKER.

The Motorcycle Cover is a consumable item, so this thickness is sufficient for this price. View detail

The breather cap is a work of art to look at in it's design and finishes

About quality and texture - The breather cap from SP Takegawa is made from billet aluminium with precision machining and an anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The breather cap is a work of art to look at in it's design and finishes and combined with an oil catch tank has resolved my engine oil loss caused from high RPM riding by allowing the oil vapour generated during this period of riding to be directing back to the engine via the clutch cover. Products to buy together - A key product to buy together with the breather cap is a oil catch tank that will allow for the collection and separation of the oil from the vapour output from the engine. Difficulty of installation - The installation of the breather cap is a simple task that took 0.2 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the breather cap to the clutch cover. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the breather cap is no different. The design of this breather cap with it's rotating barbed hose fitting is what sets it apart from the others. About shipping and packaging - With there being no cost difference between sea freight and EMS for the breather cap, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Monkey 125 but the range is very limited. View detail

C125 is the best choice

I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and the brand Kitako was trustworthy.
You won't feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. -------------------------------------------------- -------- I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and I trusted the brand Kitako. You may not feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. Powered by Google Translator View detail

Standard, no problem

It is a standard. No problem at all. View detail

Genuine DID 420NZ3 Gold Spare Chain Link

I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail

Did not fit.

The conformity information is incorrect. I was disappointed because I purchased it on faith. View detail

I think it is necessary and sufficient.

This is just my personal opinion, but I think it is not a PeLePera, and considering the price, I think it is satisfactory enough. View detail

I put it on my RG 50Gamma.

It's just like changing a light bulb.
There is no problem View detail

KITACO Drive Sprocket (Front)

It has good quality that can replace the genuine product.
Kitako products are popular with many buyers and are of excellent quality.
Considering the low cost and long durability, it would be difficult to choose a better product than this product.
I will continue to use this product and thank you for allowing me to use this great product. -------------------------------------------------- -------- It has good quality that can replace the genuine product. Kitako products are popular with many buyers and are of excellent quality. Considering the low cost and long durability, it would be difficult to choose a better product than this product. I will continue to use this product and thank you for allowing me to use this great product. Powered by Google Translator View detail

Cosmetically good.

This is the only Sprocket that I can think of. I use the same number of pins. I use the same number of pins, and as a matter of course, I have no problems. View detail