Reviews
License Plate bend prevention
Before I installed the License Plate Base, I used to catch my pants and bend them, but since I installed the License Plate Base, I haven't had any problems. View detail
Refresh
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert it into the mounting hole of the Front Fender. A collar with a brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Rubber-based parts deteriorate, so it's a good idea to replace them periodically. They also protect the parts, so it is better to replace them before they stop functioning.
View detail
Securely mounted.
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased from an acquaintance was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert the Grommet into the mounting hole of the Front Fender. The collar with the brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It feels good to properly combine and install these parts.
View detail
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail
Appearance Refreshing
It's warm and looks simple, so it's great. View detail
For CB250F
Same as the genuine Front Fork Dust Seal . About shipping and packaging Very good packaging.Fast shipping no way to dammage. About quality and texture Products to buy together realy genuine product. good qulity.Thanks to the webike team View detail
Front Fork Oil Seal Set For CB250F
good quality and great deal from Webike, super fast international shipping, very well packaged and a reasonable price, thanks Webike team great! View detail
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
purchasing a spare part
When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product.
View detail
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
Be careful and read before you buy this.
This grip could not fit to your motorcycle. Even if the product describes you can use this, it may not be on your bike. I got one cuz it was supposed to fit my bike but it didn't. so I asked it seller(the brand Kijima) and they replied that 'This item is not compatible with Eliminator 450. Eliminator 450(US imported version) and Eliminator 400(Japanese domestic version) are completely different motorcycles. So I asked about the dimensions of the handlebars to official Kawasaki global and they replied 'The diameter of the EL400's handle bar is same as that of EL450's.' I sent this reply to the seller and got the reply 'The compatibility information on our website states that it is universal. Therefore, some processing may be required. Please understand that if a customer buys the wrong item due to a confirmation error, we cannot accept returns / refund.'. When I received this message, I gave up to claiming it and decided never to buy anything from Kijima. View detail
Good part
Original Honda part, of good quality, new. With a well-made finish. Manufactured to a high quality standard. Reliable, and of good durability. I recommend. View detail
Necessary and sufficient, a sense of security
I have bought this product many times because I think it is a consumable and does not have a large impact on performance, etc., so I focus on the cost.
When I bought a product from a certain D company, I felt the accuracy of the Screw threads was not good enough? I felt a little bit of a snag when I turned it by hand, but NTB has no problem.
I have never had any problems with durability, etc., as I change the parts regularly.
As for the car models in Lineup, I think NTB is the way to go.
View detail
CB1100 Fork Seals
Another great deal from Webike, super fast international shipping, very well packaged and a great price, thanks Webike you guys are great! View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail
Large satisfied
I have been asked by my daughter for a long time, but due to the severe cold weather this year, I bought it. (Scooter) So I had a hard time removing the cowl, but I am Large satisfied with the contents of the product. I have several other motorcycles, so I plan to purchase & install them one after another. I think it is very cost effective! View detail
For the price ….
I bought this because I changed the front and rear Calipers to Gold and wanted to have a consistent color.
Well, I believe it is less likely to deteriorate because of that….
Matching with GoldCaliper was a disappointment. I still think it would have been better to leave it in Black.
View detail
FOR CB250F
Actually this item i could not found in my country (Emblem,Production 86150-KPG-901). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. highly recomended. View detail
best grip heater
This is 3rd time i use Kijima grip heater. I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without addhesive, of course need to make effort little bit to install. View detail
Fits: HONDA CBR1000RA, HONDA VFR800FI, HONDA Forza300, HONDA SUPER CUBC125, HONDA VFR800A, HONDA VFR800, HONDA RVT1000R, HONDA NC750XD, HONDA Monkey125, HONDA FORZASi, HONDA NC750X, HONDA GROM, HONDA CTX700ND, HONDA CTX700D, HONDA CTX700, HONDA CBR600RR, HONDA CBR300R, HONDA CBR600RA, HONDA CBR1000RR, HONDA CBR250R
Conscientious price, but quality is not so good
I purchased this product as a replacement for the OEM throttle pipe when replacing the grips on my CL250.
Before installation, we carefully checked the differences with the OEM Product and found the following three differences.
1. no Rib to prevent interference with Switch box
2. with BALI (due to different Material)
3.Pull Side shape is different
1. is Merit for the user. (Or rather, Honda's throttle pipe shape is special.)
When replacing the Grip with an OEM Throttle pipe, this Rib must be shaved off.
This Rib is to prevent the Grip from interfering with the Switch box and making it dull around the Grip.
Must not be pushed in too far when replacing Grip. *
Also, OEM throttle pipes have many warts on the grips to prevent them from turning.
If you replace it with a thin-walled external grips, the wart will be raised.
This product is grooved so that it can be used for external grips while serving as a detent.
I think 2. is due to individual differences, but sometimes BALI is still there.
Check it carefully before installation and handle it properly.
The inside of the Pipe was also covered with small amounts of Garbage, so a simple cleaning was performed before installation.
3. is a little tricky.
This may not be a problem for vehicles other than the CL250.
As shown in the photo, the Pull Side has a different shape, which increases the play of the Throttle.
= Open the Throttle and increase the pullback until the Engine reacts.
In the case of CL250, the switch box and throttle are in one piece.
It is necessary to remove the thailand core of the throttle body at the stage of removing the OEM throttle pipe.
If you are able to replace it, it would be possible to adjust the play of Wire.
The workload is a little more than for other types of vehicles.
(*)
Interference with the Switch box was compensated for with Yamaha's OEM parts WasherPlate.
I think it was RZ system OEM Parts, but I recommend stocking up on them so that there is less worry about what to do.
YamahaOEM Parts:Watsushiya, Plate]
90201-261L1
View detail