Reviews
Switching from NORMAL
The effect was definitely stronger.
Nevertheless, the Grip force of Tire also has a Quantity:Pair (for Left and Right) The current Pirelli Sport Damon is inferior to the IRC RX-02 when it was the NORMAL Pad.
In other words, I imagine that the combination of RX-02 and this pad works very well.
Other reviewers have written about Fee Rings when reverting Levers, but for someone like me with little skill and experience, I have no idea.
Also, when I apply Brake, I hear a jiggle or some kind of electronic sound.
View detail
The packaging is, sadly,..,
Since Impression was well received, I was excited to purchase this one for myself.
Since I had just replaced the Brake fluid myself not long ago, I also replaced the pad myself.
I have been using Copa Slip to stop squeaking and this time is no different.
The Front of SEROW250 with DAYTONA's HYPERSintered was incredibly scary at first, even on the street, so I set out for a test run with a lot of caution, but it worked there and gradually got better and the break-in period ended after 15 km.
I look forward to Fee Rings at the next and subsequent Tourings.
My only disappointment is the packaging.
Does the Vesrah factory do this kind of packaging?
It arrived in a thin, bag-like Cellophane with a base paper and pad.
Go in, or rather, you can imagine what would happen if you put something that hard and heavy into a Cellophane bag.
The bag was torn, and when I unknowingly took it out of the box, the contents fell down with a thud.
It's hard to believe, but it's true.
And I wanted them to be shipped at least GRUGRU wrapped in plastic wrap,
And if they were put in a box by Webike! I wanted to make sure that measures were taken to prevent the contents from coming out,
If the packaging is this fragile at the time of shipment from Manufacturer, I can only assume that it was torn when it arrived at Webike! I suspect that it was torn when it was delivered to Webike!
Anyway, that makes me feel bad.
There are no scratches on the product and the performance seems Large sturdy.
I would have given it 5 Stars if it ran to some degree and I was satisfied with the Fee Ring, but I gave it 3 Stars due to packaging issues.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Moriwaki master cylinder cap
I ordered these caps as an upgrade and to add a bit of style, my caps were as ever packaged and boxed to the highest standard,with only four screws holding these on both were fitted within minutes an easy upgrade for your cb13 View detail
Easy to grip due to its folded shape
I replaced the lever because it had been broken by a standing fender bender. I think it is easy to grip even for a person with small hands due to its folded shape. However, the quantity:Pair (for Left and Right) If you want to replace the Levers with different shapes, you should use the Quantity:Pair (for Left and Right) We recommend replacing the lever at the same time. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
I am satisfied
Low unit price and ScrewQuantity with Driver:2pc
It is good to be able to exchange easily.
Inexpensive foreign-made products may be poorly processed.
I have a lot of defective products and I don't want them to leak.
We chose MORIWAKI products, even if they are a little more expensive.
The look would have been better if it were made of Plating.
View detail
Necessary and sufficient, a sense of security
I have bought this product many times because I think it is a consumable and does not have a large impact on performance, etc., so I focus on the cost.
When I bought a product from a certain D company, I felt the accuracy of the Screw threads was not good enough? I felt a little bit of a snag when I turned it by hand, but NTB has no problem.
I have never had any problems with durability, etc., as I change the parts regularly.
As for the car models in Lineup, I think NTB is the way to go.
View detail
Fits: HONDA NC750X, HONDA NC700X, HONDA Silver wing600, HONDA Silver wing400, HONDA FORZA X, HONDA FORZA Z, HONDA PS250, HONDA FAZE, HONDA CBR250R, HONDA CBR250RR, HONDA VTR250, HONDA FTR223, YAMAHA FJR1300, YAMAHA XJR1300, YAMAHA XJR1200, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI ST250, KAWASAKI W650
very good
They took good care of us. Thanks to them, I was saved. View detail
cheap
[How is it used?
Oil replacement once a year
How was your experience with it?
I don't have a measuring machine and I don't know what it feels like.
How did it compare to other products?
The appearance is like OEM is expensive.
Functionally, is the amount of Filter inside more than OEM? And?
Gold is inexpensive and the Brand is a classic, so I personally feel secure.
[Points to note]
I think it's about conformity caution.
View detail
DAYTONAOil Filter
I wanted to replace the oil and filter by myself, and after a lot of research, I found DAYTONA's products! I recommend it! View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail
Reliable
I have been using KIJIMA Oil Filter since my previous W800. This time I used 105-833 with Magnet for TriumphBONNEVILLET120. It is installed without any problem.
Always replace every 2 Oil changes.
Of course there is no OilTrouble, etc. I will probably continue to use it because of its excellent cost performance.
View detail
DAYTONA DAYTONA Oil Filter
The oil filter for PMC's short oil pan was discontinued, so I looked up where the OEM was and found out it was made by DAYTONA. I don't know the difference, but the price from PMC was 2000 yen and DAYTONA was 1115 yen, about half the price, so I think the cost performance was good. I will continue to purchase. View detail
Good cosmetics, old standby.
[How is it used?
It has been a standard consumable for a long time. I use this Filter every time.
How was your experience with it?
The quality is stable and reliable. I am satisfied with the quality of the product and have had no problems with it.
[Points to note]
Even if you use Filter wrench, you may choose to use Wrench because it is a Type without corners. I have never had a problem because I stick the Driver in and remove it.
How did it compare to other products?
It is comparable to the OEM Product, and I don't think there are any problems. There is no visible difference in performance, but it is a good consumable item for periodic replacement due to its good cost performance.
View detail
FOR CB250F
I am happy to work with the webike team.Actually this item i could not found in my country (Mark, Drive Caution 87560MY1701). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Cost performance!
It is a normal oil filter, no oil leakage and comparable to OEM. Cost performance is good. View detail
Very ordinary Oil Filter
It is very common, but there is a Merit that can remove foreign objects in the Engine because it contains Magnet.
I always choose with Magnet's Oil Filter because I think it is better to have it than not to have it.
View detail
The usual K&N, the usual peace of mind.
There are YOSHIMURA and regular MODELs, but the price is almost the same, so of course I chose the YOSHIMURA K&NOil Filter with Sticker.
It's a Brand that's almost like a standard when it comes to oil replacement, so it's a safe place to start.
The rest is with nut, so it can be quickly tightened with a regular Glasses Wrench or Socket.
You don't have to go out of your way to buy Oil Filter tools and save some money.
I did not use the YOSHIMURA Sticker that I received, but I stuck it on something other than Motorcycle as a decoration. Yes, it is YOSHIMURACup. It looks just right.
I have always been attached to K&N's, so when it comes to Oil Filters, I don't want to use anything else, or even think about it.
View detail
Fits: HARLEY-DAVIDSON FLSTF Fatboy, HONDA VT1300 CR, HONDA VT1300 CS, HONDA VT1300 CX, HONDA Shadow Classic 400, HONDA shadow slasher, HONDA Shadow Phantom 750, KAWASAKI VULCAN 400 Drifter, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI VULCAN S, SUZUKI Intruder LC250, SUZUKI Intruder Classic 400, SUZUKI Boulevard 400, SUZUKI Boulevard 800, SUZUKI Boulevard M109R, TRIUMPH Rocket III Roadster, YAMAHA VMAX, YAMAHA XV1600 Roadster, YAMAHA XVS 1300CA, YAMAHA XVS 950A
Soft and Fit feeling is very good
The 100% polyester material is softer than most commonly used materials and fits the car body better. The Harley-Davidson Touring model (without windshield) and the Side Back is available in quantity.:Pair (for Left and Right) The MODELs in the "1" can be covered with a donut. View detail
Excellent choice, cheaper than OEM.
Gotta have oil filters, right? I like to change filters often but don't want to put a bunch of money into it if I can avoid it.Great filters. I learned about these when I had an older bike and found out they supply alot of oem and aftermarket oil filters. Same quality as oem and there cheaper. Why not buy directly from the manufacturer. Never had an issue running these. The inner screen has extra large holes and the metal is folded nicely. The rubber grommets fit tight on the filter's metal end caps and they fit tight around the pressure relief insert Mt09. I give it 5 stars plus These filters are a good value and have worked great for us. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Parenthesis OK
Simple and the texture was good. View detail