Reviews
Good cosmetics, old standby.
[How is it used?
It has been a standard consumable for a long time. I use this Filter every time.
How was your experience with it?
The quality is stable and reliable. I am satisfied with the quality of the product and have had no problems with it.
[Points to note]
Even if you use Filter wrench, you may choose to use Wrench because it is a Type without corners. I have never had a problem because I stick the Driver in and remove it.
How did it compare to other products?
It is comparable to the OEM Product, and I don't think there are any problems. There is no visible difference in performance, but it is a good consumable item for periodic replacement due to its good cost performance.
View detail
CB250F
I am happy to work with the webike team.Actually this item i could not found in my country (Kyatsup 14MM 90084-MN8-010). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
FOR CB250F
I am happy to work with the webike team.Actually this item i could not found in my country (Mark, Drive Caution 87560MY1701). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Fits and stable
I order new Honda OEM radiator cap with part number 19037-GEE-710 to replace for old radiator cap of Honda VFR 800 VTEC 2003. The old rubber that had aged is no longer closed, the new cap has fitted and stable. View detail
Replaced at the same time as bremboDisc Rotor
Replaced together with bremboDisc Rotor.
It stops cleanly and has no control issues.
However, when you put it on, you can't tell it's brembo by its appearance.
View detail
Cost performance!
It is a normal oil filter, no oil leakage and comparable to OEM. Cost performance is good. View detail
Purchased with Rear disk rotor
I bought it together with brembo's rear disk rotor when I purchased it.
I haven't installed it yet, but I have no complaints about the quality and appearance of the product.
I will make an impression when I install it again.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA 400X, HONDA CBR250R, HONDA CBR400R, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF450L, HONDA CBR500R, HONDA MONKEY125, HONDA CB150R, HONDA CB300R, HONDA CB500X, HONDA ZOOMERX, HONDA DIO110, HONDA glom, HONDA CBR250RR, HONDA PCX125 JF28-1000001-1099999
Best Matches
It matches the color of the car body and looks like an OEM product. I am satisfied with the color match. I could install it without any modification, even though our Motorcycle is not listed in the list of applicable vehicle models. View detail
Very ordinary Oil Filter
It is very common, but there is a Merit that can remove foreign objects in the Engine because it contains Magnet.
I always choose with Magnet's Oil Filter because I think it is better to have it than not to have it.
View detail
brembo is safe and secure
[How is it used?
I decided to buy a good replacement for my CB125R.
How was your experience with it?
I'm happy with the Large change because I can use as much Brake as I want from the indescribably subtle Fee Ring of the OEM.
View detail
Genuine Honda Dust Seals for CBR500R 2018
This bike had an issue with a split dust seal for the rear wheel. Probably the cause of removing the rear wheel bearings and not seating correctly. Not too much of a problem and finding the correct seals was not hard at all. These seals do fit a lot of bikes and I do have some usually in stock but I ran out. I used the Webike help pages and then cross referenced with Honda schematics to make sure they were the same ones. The price Webike had these for was really good value and better than locally sourced. I did have a few other small parts in the basket so I just ordered them all together and this then saved some shipping costs too. EMS is who I use these days as they just get your order to yopu quickly. 5 days from shipping and the order arrived at my door. The small parts in the order were all packed really well and padded to stop any damage. These seals came in their own little Honda packets. I did order a few of them so I have some in for other bikes. The seals themselves are pretty supply but with the right amount of rigidity. They were well moulded and this is usually the case anyway from Honda OEM parts. Very pleased with the purchase and the bike rear wheel now has a good seal to kepp all the UK crap out. Thanks Webike. View detail
Winter Essentials
I had survived the winter with only the ZETA hand warmer, but as I got older, the coldness in my hands started to get to me, so I bought it. View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
ODAX Keiti Fuel Cap Pad
연료통 입구에 흠집이 나는걸 방지해 주려고 샀습니다.
푹신푹신한 재질이라 더 좋은거 같아요
스티커만 붙이면 되는거라 설치하기 간편합니다.
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's a soft material
It's easy to install because you just need to put on a sticker.
----------------------------------------------------------
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's soft and fluffy
You only need to attach a sticker, so it's easy to install.
I boughHt it to prevent scratches at the enterance of the fuel tank.
I Think It'S BECAUSE IT A SOFT MATERIAL
It's Easy to Install Because You Just need to put on a Sticker.
Powered by Google Translator
View detail
Fits: HONDA VFR800, HONDA VFR800X Cross Runner, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR250RR(2017-), HONDA CBR500R, HONDA CB500X, HONDA Rebel300
Recommendation for those who care about the appearance.
I applied it on my CB400SB, and it is an excellent shape, and I was able to apply it beautifully without any difficulty, just keeping in mind to apply it carefully and slowly. I think the adhesive power of this capPad is weaker in winter than in summer. View detail
SBS Street pads fitting to GSX-R1000
Trying a different compound of these SBS pads. Not used this brand before and hope they are as good in certain situations as the Brembo street ones I have tried. Very good price. Easy to find. Shipping cost was good as I also had other brake pads in the same order. Everything in my order was perfect. These pads are clearly more street oriented as can be seen witht eh material on the brake pad. Very much cannot wait to try these. Also bought rear ones for same bike. View detail
It's very conspicuous...
Nomal black caps with pinch points are tacky.... View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
Zita's Throttle
Movement is better than standard Throttle. View detail
The usual K&N, the usual peace of mind.
There are YOSHIMURA and regular MODELs, but the price is almost the same, so of course I chose the YOSHIMURA K&NOil Filter with Sticker.
It's a Brand that's almost like a standard when it comes to oil replacement, so it's a safe place to start.
The rest is with nut, so it can be quickly tightened with a regular Glasses Wrench or Socket.
You don't have to go out of your way to buy Oil Filter tools and save some money.
I did not use the YOSHIMURA Sticker that I received, but I stuck it on something other than Motorcycle as a decoration. Yes, it is YOSHIMURACup. It looks just right.
I have always been attached to K&N's, so when it comes to Oil Filters, I don't want to use anything else, or even think about it.
View detail
Excellent choice, cheaper than OEM.
Gotta have oil filters, right? I like to change filters often but don't want to put a bunch of money into it if I can avoid it.Great filters. I learned about these when I had an older bike and found out they supply alot of oem and aftermarket oil filters. Same quality as oem and there cheaper. Why not buy directly from the manufacturer. Never had an issue running these. The inner screen has extra large holes and the metal is folded nicely. The rubber grommets fit tight on the filter's metal end caps and they fit tight around the pressure relief insert Mt09. I give it 5 stars plus These filters are a good value and have worked great for us. View detail
reasonable price
I recommend this as a very basic model.
I recommend it for both price and durability. Of course, it also helps in terms of appearance.
It is more helpful in terms of neatness than the rubber plate of the original footrest. I think that such small details are of great help when tuning.
The shoes fit perfectly into the body! Avoid bare feet
-------------------------------------------------- -------- Recommended as a very basic model. Recommended in terms of price or durability. Of course, it helps in appearance. It is more helpful than the rubber plate of the genre of the footsteps. Shoes are just wrapped in the body! Please refrain from bare feet Powered by Google Translator
View detail