Reviews
More rust-resistant than OEM Product
I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail
Peace of mind that it is made by MORIWAKI
The peace of mind of being made by MORIWAKI.
I don't have Level gauge, so I guess I'll go back to OEM just in case I need to replace Oil.
So far, no problems at all.
View detail
Fits ZX-4R
It can be attached to ZX-4R without any problem. View detail
Reliable
I have been using KIJIMA Oil Filter since my previous W800. This time I used 105-833 with Magnet for TriumphBONNEVILLET120. It is installed without any problem.
Always replace every 2 Oil changes.
Of course there is no OilTrouble, etc. I will probably continue to use it because of its excellent cost performance.
View detail
Fits: HONDA VFR800X, HONDA VFR800F, HONDA VFR1200X, HONDA VFR1200F, HONDA CBR900RR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR400R, HONDA CBR1000RR, HONDA CB750, HONDA CB400X, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1000SF, HONDA CB500X, HONDA CBR500R, HONDA VTR1000F
sense of unity
The last time I bought and installed the same Black color, I thought it would be more consistent with the same color, so I decided to buy a Blue color before the Point expired.
I like the texture but the Design is so-so.
View detail
FOR CB250F
reasonable price.Carburetor o rings. It is Genuine. Very good packaging. Fast shipping. Thanks to the webike team. It has not been installed yet. Highly recommended. View detail
FOR CB250F
Actually this item i could not found in my country (Emblem,Production 86150-KPG-901). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. highly recomended. View detail
FOR CB250F
Actually I could not find this item in my country (24724422000 cover, dust 24724-422-000). Finally I bought it from webike. It is authentic. Very good packaging. Fast shipping. Thanks to the webike team. It has not been installed yet. Highly recommended. View detail
FOR CB250F
Actually I could not find this item in my country (Key, Blank 35121-MAS-G01). Genuine key, reasonable price, good packaging.very nice.Thanks to the webike team.good for the genuine buyers.highly recomended. View detail
exchange
With BrakeMaintenance, it has not been replaced for decades, and I believe it has deteriorated over time, so I am replacing it.
It was sold by HondaOEM Product and I was able to purchase a new one.
View detail
Gone.
Within a month of using it, the wind blew it away. I only had to put it on and wrap one band around it, so when I came home on a windy day, only the band was left and the Motorcycle was completely naked. View detail
Fits: HONDA CBR900RR, HONDA VFR750F, HONDA CBR1000RR SP, HONDA CBR1000RR, HONDA CRF1000L DCT, HONDA CBR650F, HONDA CRF1000L, HONDA CBF600, HONDA CBF600 S, HONDA CBR600F4i, HONDA XL1000V Varadero, HONDA CBR1000RRR SP, HONDA CB650R, HONDA CBR650R, HONDA CBR1000RRR, HONDA NR750, HONDA CBR600F, HONDA CBR600F Sports, HONDA CBR600RR, HONDA CB600F HORNET
SUNSTAR Front sprocket 525–16T
Prices were about the same as OEMSprocket.
There is a Black color surface treatment that hides it but looks good.
The weight is lighter than the OEM model due to the lack of rubber for running noise control. The installation itself is not too difficult, but when working alone, you need to pay attention to safety by properly securing the motorcycle so that it does not move.
View detail
Cospa is nice.
O-ring for CROSS CUB (JA45) level gauge
Once a year or so, when oil stains from the threaded part of the Level gauge become noticeable, we replace it.
View detail
Cost-effective dress-up
I purchased this product because I liked the simple design and more affordable pricing than other companies.
Since the mounting is hexagonal, it is difficult to tamper with by hand like the OEM, and I expect it to be somewhat tamper-proof.
The color of Gold is slightly lighter than Posh and Babyface, but once you get used to seeing it, it doesn't matter much.
The O-Ring is also included, so it can be popped in as is.
View detail
OEM equivalent in both reliability and price
[How is it used?
*Evaluated after replacement and only one run for Campaign purposes (https://www.webike.net/special/campaign/brembo_serieoro/)
Only rear. use
211 km from December 30, 2023 to January 8, 2024, from urban driving to some mountain passes (National Highway 299 Hanno - Chichibu) and highways.
Brake Disc:SUNSTAR ER-033 (https://www.webike.net/sd/24143238/)
Brake fluid:ACTIVE DOT-04 Green (https://www.webike.net/sd/20443936/)
Brake hose and others:GOODRIDGE (https://www.webike.net/tab/parts/br/268/)
Was the one you received as per Image?
The product is exactly as shown in the image.
Although there is no package image, it was packaged in a Plastic package, which is often seen in Vesrah and other products.
The Red Coating-like substance was more slippery than I had imagined.
The Red part of the product is as shown in the product image, so it is natural that the Red part was claimed as shown in the Image even when it was installed in the vehicle.
Was the installation difficult?
The shape is exactly the same as the OEM, and the shim, bracket, and installation are all easy.
Red coating is applied except for the ground surface of the Brake Disc, and I feel that the silicon grease has been extended well.
Unlike Vesrah, the back surface is not textured by coating, so I thought it was easy to clean with parts cleaner.
How was your experience with it?
*Experience Brake Pads:OEM, Vesrah VD-174JL (https://www.webike.net/sd/20460287/)
We could not perceive any difference compared to OEM or Vesrah, although we believe we also got a bite during the run.
When only Rear was intentionally applied, the speed adjustment was well done, and I did not feel any discomfort.
The product is at least not problematic to use from the above and seems to have enough performance to be used quickly and easily.
I don't think any dragging has occurred.
Circuit is rarely visited, so I think it fits the usage of this product, which claims to be a general road Main.
[Included Parts:were they on?
Translation (please type here) was included with the paper Instruction Manual, which did not include any translation at all.
Even though he could not read the Instruction Manual, he assumed that the chamfering, grease, and installation were the same as OEM because the shape is the same as OEM.
[Was there anything that disappointed you?
Not for products
The product description on Webike incorrectly stated that anti-counterfeiting was included, but this product was not covered.
https://www.brembo.com/jp/company/news/brembo-app-that-checks-if-products-are-original-or-not
[Notes]
As you can see in the product image, the brake pads are bright red and the part that can be seen from Caliper when installed is also red. They may not be recommended for those who care about the color.
Price difference from OEM
The price of this product is a little higher than that of OEM Brake Pads (5,830 yen) at the time of writing (6,380 yen). However, the price will be reversed by discount and Point reduction.
While OEM parts have a different level of reliability, this is a product of a well-known manufacturer whose name is often mentioned when people talk about "brakes," even though it is in the same price range as OEM parts. Although the color may be a little different for some people and vehicles, it has the performance to be used without discomfort after pad replacement, so it is likely to be one of the top choices when replacing consumable parts.
View detail
Good cosmetics, old standby.
[How is it used?
It has been a standard consumable for a long time. I use this Filter every time.
How was your experience with it?
The quality is stable and reliable. I am satisfied with the quality of the product and have had no problems with it.
[Points to note]
Even if you use Filter wrench, you may choose to use Wrench because it is a Type without corners. I have never had a problem because I stick the Driver in and remove it.
How did it compare to other products?
It is comparable to the OEM Product, and I don't think there are any problems. There is no visible difference in performance, but it is a good consumable item for periodic replacement due to its good cost performance.
View detail
UV sensitive, torn after one year.
The 2LSize is too small for the MT09. Also, it seems to be weak against ultraviolet rays, and the part that was exposed to the sun well deteriorated and tore after not lasting a year. View detail
Rolling and realization, Damage reduction.
I stepped on an Oil leak in Corner and fell down slippery…...
I was worried about Damage to the vehicle.
The footpeg is shaved off the footpeg.
The important parts of the Frameetc. were intact.
Thank you. You saved my life. (T-T)
View detail
CB250F
I am happy to work with the webike team.Actually this item i could not found in my country (Kyatsup 14MM 90084-MN8-010). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail