Reviews
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
Idling stabilized?
I changed the oil as part of maintenance, and it seems to have stabilized the idling, but I don't feel that the power is increased. I really don't know if the period to change the oil was too short and the oil was not so deteriorated, but it is an old motorcycle and I will replace the oil as soon as possible. Next time I will buy a Torque wrench and tighten it with the specified Torque. View detail
To match the Gold amount up to free shipping.
As per Title, I bought it to get free shipping.
We strictly follow the routine of one in every two Oil changes, so this is fine.
This one also has an O-ring attached, which is convenient.
There were two types of large O-rings in the package. I used the one with the smaller diameter wire, but I think it is fine.
Is it because of these two types of O-rings that I feel like there are so many compatible car models listed?
A certain "Kansai Soul", which is only cheap, is poorly made, but I think this one can be used with peace of mind.
View detail
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
usually
The GPZ900R Plug is
NGK recommends DR9EA, an improved version of DR8ES
View detail
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
NGK DR9EA 3437
There was some corrosion, so we will replace it regularly from now on. View detail
Purchased for CB750four
I expect Magnet effect because I have had iron powder mixed in before. View detail
Magnetized, higher than OEM
I always use OEM, but this time I switched to KIJIMA's Magnet. We will see how it goes. View detail
Element is always this!
Required Packing on OEM Equivalent Product (excluding Drain Washer) It is easy to use because everything is included in the package. View detail
520Conversion
Conversion520 from 530. It is easier to push and move. View detail
Fits: HONDA CB1100R, HONDA CB750C, HONDA CB1100F, HONDA CB750F, HONDA CB900F
ExactlySize
We decided to replace them together with the One way clutch.
No Oil leakage and it feels like a perfect fit.
View detail
Speaking of Oil Filter
I have been a DAYTONA customer for a long time, and I have been able to use it without any problems. View detail
520Conversion
I was able to Conversion from 530 to 520. View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 5/8" / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61738_TS.jpg)
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
Fits: HONDA CB1100R, HONDA STEED600, HONDA MAGNA, HONDA RC30, HONDA VF750C, HONDA VFR750F, HONDA Crossrunner, HONDA VFR800F, HONDA VT250F, HONDA XELVIS, HONDA VT250Z, HONDA V-TWIN MAGNA, HONDA VT250 SPADA, HONDA VFR800X, HONDA CB1100F, HONDA CB1100SF, HONDA CBR1100XX, HONDA X-11, HONDA CTX1300, HONDA ST1300
MORIWAKIOil Filler Cap
One of these costs just under 4,000 yen.
The texture is good, so I'm satisfied.
Recommended for casual One point
View detail
Simultaneous purchase at the time of Chain replacement
Purchased in conjunction with Chain replacement.
*Buy and replace both front and rear.
It is recommended to replace it with Chain at the same time.
Shift has also changed so much that it is easy to get into and back to the way it was in the new car.
View detail
DJEBEL250xc.
Installed on a DJEBEL250xc, cutting off the OEM ignition coil in the middle and connecting it. It is a recommendation to refresh the electrical system. View detail
Buy ReplaceOil Filter!
Oil Filter Changed. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200 DAEG, SUZUKI GSX1100S sword, HONDA CB1100R, HONDA CBX1000
Practical Custom
magic rod (Lol)
The effectiveness of the program was experienced.
The JB-POWER logo is also included, giving it a custom look and a cool look. ??
View detail
Fits: HONDA CB750F, HONDA CB1100R, HONDA CB1100 type R-18 inch
Don't seek OEM quality, after all, it's Other Brand Product.
I was attracted by the brand name "DOREMI COLLECTION" and purchased it, but the packing of the Lens is not rubbery but sponge-like. I wonder if it is made in China after all. I tried to re-cut the screw part with a tap, but there was no tap that fit the screw hole, so I re-cut the groove in a different way. Since the product is cheap, it might be better to think of it as a replacement for the OEM one in case of emergency. View detail
![PREMIUM ZONE Filler Cap [M-24XP3.0]](https://img.webike-cdn.net/catalogue/images/15651/91885_O01_TS.jpg)
from the smallest thing
It is a small commitment, but it is self-satisfying. View detail
Standard NGK
I replaced the Plug because it was still the same as when I bought the vehicle used.
The work itself was easy to replace as it could be done with on-board tools.
I think it is a feeling problem that it may turn to be a little Smooth.
View detail