Reviews
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Excellent pads
About quality and texture
The brake pads were chosen for Yamaha Vino; this brand has already been tested more than once in harsh urban braking conditions, so the choice immediately fell on them
The quality of the linings is high, they are dust-free, even after 5000 kilometers there is a minimum of brake dust in the drum
The glue is not visible, but there is enough of it, the sizing is very good
About the feeling of use
Operation on the next scooter showed its best side, braking is effective, even though it is a drum brake
With the correct cam setup, the brakes grab instantly and hold the wheel perfectly when pressed hard.
The average service life is about 10-15 thousand in urban conditions with frequent braking
Products to buy together
The kit includes everything you need, brake pads and springs
Difficulty of installation
Easy installation, you need to remove the muffler and rear wheel, then replace the pads
Cost performance and comparison with other products
Low cost compared to the original, and the braking quality is approximately 1.5 times higher
About shipping and packaging
Excellent blister packaging, no damage during delivery
Any concerns, cautions, or advice when purchasing
I can only recommend this product, already tested with three scooters ---------------------------------------- ------------------ About Quality and Texture The brake pads were chosen for Yamaha Vino, this brand has already been tested more than once in hard urban braking conditions, so the choice immediately fell on them The quality of the linings is high, they are unbearable, even after 5,000 kilometers in the drum minimum brake dust Glue is not visible, but it is enough, the gluing is very good ABOUT THE FEELING OF USE Operation on the next scooter showed itself from the best side, braking is effective, although it is a drum brake With proper tuning the fist, the brakes are grasped instantly and hold the wheel perfectly with a strong press The service life of an average of about 10-15 thousand with urban conditions with frequent braking Products to Buy Together The kit has everything you need, brake pads and springs Difficulty of Installation Light installation, it is necessary to remove the muffler and rear wheel, then replace the pads COST Performance and Comparison with Other Products Low cost compared to the original, and the quality of braking is about 1.5 times higher ABOUT SHIPPing and PACKAGING Great packaging in a blister, damage during delivery is not Any Concerns, Countions, or Advice When Purchasing I can only advise this product, already tested by three scooters Powered by Google Translator
View detail
Replaced with a new one
This Manufacturer is a Repeater, it is cheap and can be installed without any problems, just like OEM Parts! View detail
Crack cracked and replaced
First of all, it is cheap! This is good enough, I was able to install it without any problems. Just my personal opinion. View detail
Stable KITACO
I used it to replace the main jet on my APRIO4jp5.
The OEM-style chamber and High Speed Pulley were running well, but I had to go out for a short distance on a very cold early morning during the New Year's holiday, even though I usually only travel short distances, and my piston started to hug.
I changed to OEM #72→#76 because I thought the fuel mixture was too low because the auto choke was working properly.
Compared to the original sound, the exhaust sound became more bass-like, and we concluded that it was still slightly thinner.
When the PistonCylinder is eventually damaged, we plan to Bore up the PistonCylinder, so this product will be useful in that case as well.
View detail
Used for CHAPPY
[How is it used?
YamahaCHAPPY (CHAPPY) Used for
OEM has discontinued the product and Vesra is available as a compatible product, but it was somewhat expensive, so we were looking for something NTB could use and found this product.
I was worried because there was no OEM Product No. for this product in the compatibility information, but there was an impression that it could be used with BOBBY, so I bought it thinking it would work. As a result, I was able to use it without any problem.
How was your experience with it?
No special tools are required for replacement, as it is simply hooked up and installed.
The positioning notches and Size feel were also similar to the OEM shape.
The car has not been driven in earnest yet, but after installing it and pushing and pulling it, it seems to be working perfectly fine.
Spring also came with a new one, so it was nice to be able to renew it.
How did it compare to other products?
As you can see in the photo, it was originally an OEM Product. (296-25331-00) was attached, but it was in RustRust condition due to a long period of neglect.
It was clearly better than that, so I am satisfied.
[Points to note]
Not particularly
【Review】
We were able to get a new Brake Shoe at a lower price than expected.
Life has not been tested, but for the price, I would be satisfied even if the amount of life is reduced a little bit.
View detail
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
For Bore up premise setting
Bore up assumption, #80-#105 Quantity:I bought the set
The original is #72, so I am trying #80 on it since it is still before bore up.
It is a 4JP5APRIO with High Speed Pulley and is in good shape with no problems.
Since there is a wide range of settings, I would like to use this to get a rough idea of the settings and then refine them a bit more if necessary.
View detail
Headlight LED
Installation was easy. It was brighter than I expected. View detail
Bore up is also in view
I purchased #80-#105 for 4JP5APRIO OEMcarburetor with a view to eventually bore up as well.
Since NORMAL is #72, I put in #80, same as 4JP1, and made Needle one step longer.
It works fine
View detail
OEM Equivalent Product, cheaper than OEM
Used for LITTLE CUB.
The low beam ran out, and a short time later the high beam also ran out. I bought this one because it was an emergency situation and it was immediately available in stock. The standard is 25-1. The Pine Stripe part number is 1P2015.
The grade of the bulbs is also the same as the OEM, White Hot bulbs, not Halogen.
I also found HalogenType, but the price difference was about three times as much, so I decided to go with the cheaper version.
Replacement is Light rim bottom, Quantity:Pair (for Left and Right) Remove the screw on the Plus of the light rim and lift the light rim upward to remove it.
The Glass part is replaced while touching as little as possible. Time required:2 minutes.
It lit up with no problem. I am relieved. I don't know about the durability yet, but it is a long-established domestic product and I am sure there will be no problem.
View detail
harmony
Not OEM, but external product stopped gal oil leakage. View detail
ngk bpr7hs
I bought these ngk candles, I haven't installed them yet, but I will definitely install them next season, they look nice and good, I think they will last me a long time!
-------------------------------------------------- -------- I bought these NGK candles, I have not installed them yet, but I will definitely install them in the next season, they look beautiful and good, I think they will serve me for a long time! Powered by Google Translator
View detail
Used on a 50cc 2Cycle moped. Quite bright!
I originally used M&H Mats Stripe Halogen bulb 12V35/30W Clear, which was brighter than OEM, but still old mopeds are still dark.
Since I use them for commuting, I decided to use LEDs for safety reasons.
Installation can be done simply by removing the headlight cowl.
The color is a beautiful White and the brightness feels 1.3 to 1.5 times brighter.
The white color is more like a recent vehicle than the yellow color, which makes it a better parenthesis.
I think it is a good cosmetic product because it is inexpensive and made by Mats Stripe, which is a reliable company!
I use it on my AF35LIVE DIOZX, but the Valve is PH7 because I replaced the Headlight with an external one.
View detail
Normal Plug
It is a normal Plug. Even on a moped, changing the plug changes the fee ring quite a bit, so I think it's a good idea to change it periodically. View detail
No doubt, NGKPlug!
No doubt, I will buy Repeat. View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
Cancellation.
I asked for it this morning and it is safely Cancelled. View detail