Reviews
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Clutch outer replacement
APRIO (4jp5) The clutch outer of the "M" was worn and slippery, so I bought it for a replacement.
I had changed only the clutch first, but it started to slip a little when starting off, so I decided it was time to change it.
Inside of Clutch outer (Clutch contact surface) However, the old one was smooth as if it had been mirror-finished, but the new one had the same rough pattern as the surface, so I thought Clutch had a good bite.
I haven't done a test run yet after the replacement, but I don't think it will be a problem since there are no problems with the original running.
Outer clutches are supposed to be replaced when the color of the clutch burns out, so from now on, the clutch and the quantity:I will change it with Set.
View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
The quality is excellent
I replaced it after using a Chinese product that was too cheap. I am satisfied with everything from packaging to product finishing and component performance. Detailed settings are also supported with the extra components included. View detail
Stable KITACO
I used it to replace the main jet on my APRIO4jp5.
The OEM-style chamber and High Speed Pulley were running well, but I had to go out for a short distance on a very cold early morning during the New Year's holiday, even though I usually only travel short distances, and my piston started to hug.
I changed to OEM #72→#76 because I thought the fuel mixture was too low because the auto choke was working properly.
Compared to the original sound, the exhaust sound became more bass-like, and we concluded that it was still slightly thinner.
When the PistonCylinder is eventually damaged, we plan to Bore up the PistonCylinder, so this product will be useful in that case as well.
View detail
NORMAL style with good cosmetics and a slightly better looking Exhaust System
It is an OEM-style, Polished looking, normal performing Exhaust System.
Gasket is also included.
The M6 bolt at the attachment point with the cylinder tends to be tightened because it is floating by the thickness of the Gasket, but it can be easily threaded off, so it is better to use a torque wrench to manage the M6 bolt to the M6 specified Torque.
It is a good cosmetic product, but the low price is partly due to the price, and some rust has appeared after two months of outdoor storage.
We replaced it with the company's Bore Up Kit (60cc) at the same time, so we have not been able to compare stand-alone performance, but we think the Level is fine.
The Motorcycle was given to me and originally had an inexpensive external exhaust system, so the sound level was almost the same.
I'm glad I bought it because it looks OEM-like, looks good and is inexpensive.
View detail
Used for CHAPPY
[How is it used?
YamahaCHAPPY (CHAPPY) Used for
OEM has discontinued the product and Vesra is available as a compatible product, but it was somewhat expensive, so we were looking for something NTB could use and found this product.
I was worried because there was no OEM Product No. for this product in the compatibility information, but there was an impression that it could be used with BOBBY, so I bought it thinking it would work. As a result, I was able to use it without any problem.
How was your experience with it?
No special tools are required for replacement, as it is simply hooked up and installed.
The positioning notches and Size feel were also similar to the OEM shape.
The car has not been driven in earnest yet, but after installing it and pushing and pulling it, it seems to be working perfectly fine.
Spring also came with a new one, so it was nice to be able to renew it.
How did it compare to other products?
As you can see in the photo, it was originally an OEM Product. (296-25331-00) was attached, but it was in RustRust condition due to a long period of neglect.
It was clearly better than that, so I am satisfied.
[Points to note]
Not particularly
【Review】
We were able to get a new Brake Shoe at a lower price than expected.
Life has not been tested, but for the price, I would be satisfied even if the amount of life is reduced a little bit.
View detail
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
Exactly
Size is Exactly on the Groms, Case is always removed so I don't use it in that state, Base is fine left on. The fabric is neither thick nor thin. View detail
Fits: KAWASAKI ZRX1200 ZR A7F, KAWASAKI ZRX1200 ZR A8F, KAWASAKI ZRX1200 ZR A8FA, HONDA CB400SB ABSSpec. Model:EBL-NC42, HONDA CB400SB, HONDA CB400SF ABSSpec. Model:EBL-NC42, HONDA CB400SF, HONDA CREA SCOOPY Model:JBH-AF55, HONDA CREA SCOOPY i Model:BA-AF55, HONDA DIO4st CESTA Model:JBH-AF68, HONDA DIO4st, HONDA FORESIGHT, HONDA GYRO X Model:JBH-TD02, HONDA GYROCANOPY Model:JBH-TA03, HONDA HORNET250, HONDA LEAD100 Model:EBJ-JF19, HONDA MAGNA50, HONDA PS250, HONDA SHADOW400 Model:BC-NC34, HONDA SPACY125
It was cheap.
Anyway, I thought that the price was so low for a Stanley product, which I trust more than foreign-made products, even after I ordered it, but when it came in, I was surprised to see the price and quantity!
I installed the Meter Bulbs because I thought that if one bulb went bad, the other bulbs would also go bad, but two of the bulbs are replaceable!
The bulb packs are also easy to remove and store.
View detail
Exactly to the Glom.
I installed SP Mukawa's Rear Carrier and it fits EXACTLY.
I bought a Rubber string at Daiso to hold it up because it seems to flap around when it's windy.
View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
For Bore up premise setting
Bore up assumption, #80-#105 Quantity:I bought the set
The original is #72, so I am trying #80 on it since it is still before bore up.
It is a 4JP5APRIO with High Speed Pulley and is in good shape with no problems.
Since there is a wide range of settings, I would like to use this to get a rough idea of the settings and then refine them a bit more if necessary.
View detail
Headlight LED
Installation was easy. It was brighter than I expected. View detail