Reviews
Advantages of Maintenance
I have been using DX since its release. I don't mind maintenance, but sometimes I get tired of doing it when I'm busy with the weather, so it's nice to have less frequent replacements. Fuel consumption and running performance do not change drastically. View detail
It didn't fit.
I bought it because WeBig says it fits New Model from 2023,
Could not install.
I checked KIJIMA's Homepage and it was 2023 - not compliant,
View detail
Stable quality
The quality is stable and the cosmetics are good.
I have used it for almost 10 years and it has served me well.
It protected Motorcycle, which was parked under the eaves, for many years.
View detail
It was EXACTLY!
I purchased this to replace an OEM Oil cap groove that was broken.
It was Exactly in JA10!
View detail
It will be useful for something.
I can't do detailed maintenance, but I bought it to know the structure. It is useful for something. View detail
As expected of DAYTONA
Was the installation difficult?
pimping
How was your experience with it?
It's going to look different
View detail
It got brighter.
I purchased this because Light was dark.
It brightened up as expected!
View detail
Dress-up in a casual way
It can be dressed up casually.
I am satisfied with the quality of the product.
It would be better if it were a little cheaper.
View detail
The oil filler cap is very convenient to use and decorate
Daytona brand is a famous brand in the production of spare parts for motorbikes from engines to decorations. In particular, the product set of oil cap, reservoir cap and bar ends comes from Daytona premium, I feel the quality is improved compared to normal Daytona. With this set of oil caps, compared to the original cap, I find that it is not only used for decoration with many colors to choose from, but also can be easily opened and closed to make changing the oil easier. With a normal OEM oil cap, I usually spend about 2 to 3 minutes opening and closing the oil cap. With the Daytona oil cap, it only takes 30 seconds to do that. View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155, YAMAHA BirdCity125 A/C
It is easy to cover because it is a dedicated product.
Used on BirdCity125 with Rear box.
I was parked in the open air in Space facing the driveway where my house is located, and one day when I went to get in, I saw a flyer at Handlebar that said I would buy it, and I also bought it for security purposes.
I was looking for a cheaper Universal Product, but since I have a Rear Box and the BirdCity has a wide front width, I was not sure if the Universal Product would fit when I put it on, so I ended up settling for this product, which is a dedicated product. I was looking for a Rear box.
I had already used Y's Gear's E Type on another motorcycle, so I knew about the fabric to some extent, but the front side is made of fabric with color, and there are slits on the front and back that can be used to pass locks, etc. It is still a very easy-to-use cover.
Since it is for full equipment, I am assuming that a High Screen will be installed, but my BirdCity has a screen that is not that long, even though it is an Other Brand Product, so when I put it on, the screen portion is too much.
It might be OK to fasten it with a clothespin, but it would have been better if the Cover had a Velcro tape or something to fasten it shortly.
I also personally like to use a long wire lock to reduce flapping of the Cover to reduce the quantity.:Pair (for Left and Right) I was a little disappointed that the Slit through the lock on the Front side is only for the Left front wheel, although I wanted to pass the front wheel of the
Also, dust and sand may come in depending on the wind direction due to the ventilation on the side.
But still, it is better than the previous open-air parking, and it is no longer dirty every time I look at it.
As for durability, I am not sure yet, but it is easy to put on, so I think this is the one I will buy next time.
View detail
Unfortunately, it didn't fit.
I purchased this product as a BirdCity155 compatible product, but it was necessary to modify the product in order to install the Left Side.
Unfortunately, we had to deal with a return, but the response was excellent.
View detail
Cheap but good product
I purchased it as a replacement for the genuine Benley 110. You can't feel any difference.
Although it is cheap, I think it is a really good product.
I replace it every 10,000 km, but I think the replacement cycle could be longer.
I plan to continue using it.
-------------------------------------------------- -------- I purchased it as a replacement for the genuine Benley 110. You can't feel any difference. Although it is cheap, I think it is a really good product. I replace it every 10,000 km, but I think the replacement cycle could be longer. I plan to continue using it. Powered by Google Translator
View detail
Oil Filler Cap
Changed to Green Light or Gold. View detail
It's perfectly normal
I used it on my MAJESTY125
The MotorcycleBROS specification table lists a different Plug, but this is the correct one, so please be careful if you are buying!
It is a Normal plug, so it is quite normal, but since it is NGK, it is still very safe.
I'm going to Repeat it again.
View detail
Fits: Others Universal, HONDA REBEL250, HONDA REBEL500, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CBR400R, HONDA GB350, HONDA GB350S, HONDA CBR250RR, HONDA CB125R, HONDA CB250R, HONDA ADV150, HONDA CB400SS, HONDA CB400F, HONDA CBR400RR, HONDA CBR250R, HONDA CB223S, HONDA HORNET, HONDA VTR
Generally satisfied, although there are reasons for the low price.
The DAYTONA WaterRegistrant I was using on my 2019 Z1000 is now over 4 years old and falling apart from the quicksand, so I decided to try a different Manufacture next.
The evaluation is based on the comparison with DAYTONA's Cover, but the large size of the Cover can fit in the LLSize Z1000.
The material is a bit flimsy, and it is hard to say how durable it will be until it is used for many years, but I have the impression that the price is appropriate in this area.
The front and rear cover has the same locking holes, but the front wheel hole is much closer to the front, so you have to lock it at the very front.
I think it is good that there is an air hole to release moisture in the Mirror section, which was not available in DAYTONA. When it rains, the humidity inside the Cover unexpectedly rises, and since it cannot escape, the inside gets wet too.
In general, the quality of the product was generally satisfactory for this price with good cost performance, although there were some price-appropriate parts.
View detail
Replaced with AJ59SUPER CUB110 Iridium plugs
To be honest, I don't know much about the effect of replacing it. 100% of the vehicles I have purchased so far have Windshield IRIDIUM in them.
I only feel that the Engine is working better, but that's OK, it's a world of self-satisfaction.
View detail
Grate item, original as far as I know
Cheapest price I could find anywhere on the internet. Defenately Cheaper than in my country. I installed them in my Honda cb500f 2020 and I rode about 3000 km a;ready and feels good. I will check them after 12000 km when I will replace them, hope all is well. View detail
More than I expected.
Product Name
NGK NGK Japan Special Ceramics MotoDX Plug CPR8EDX-9S 95321
Item Number
CPR8EDX-9S
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
About 1 hour
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I decided to buy it for power up and good starting performance.
Was the one you received as per Image?
It was as per Image. None in particular.
Was the installation difficult?
The GSX had to be removed from the exterior, so that's where the time was spent; the Plug requires the supplied tools.
How was your experience with it?
I didn't experience any more change than other car models. It was no different than I expected.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
I didn't feel any change in performance.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Plug replacement
Replaced the original old C7EPlug with no problems.
I'm not sure if it improves starting or fuel economy.
View detail
Improved starting performance! Certainly works!
I repurchased the commuter issue because I switched from CUB110JA44 to JA59.
I had used a Plug of this series in my previous car and liked the improved starting performance and the acceleration feeling at the beginning of Axel opening.
So I decided to remove it from JA44 and reuse it in JA59, which I had switched to, but to my surprise, the designated Plug heat value was changed to 6→8 for JA59, which became a New ModelEngine!
I wonder if it is the effect of the higher compression ratio of the Engine?
Anyway, now I can no longer reuse it, so I bought another MotoDXPlug, number 8.
The installed impression is the same this time, with the first immediate impression being improved starting performance.
The image that used to be played with a "curl" sound is now played with a "curl" sound, and the increased pulse and torque feeling at the beginning of Axel opening is also unchanged.
We do not yet know how long this performance will last, but the manufacturer claims that the durability has been improved, so we are looking forward to the Large model.
View detail