Reviews
Fits: YAMAHA Cygnus 125, YAMAHA Selo 225S, YAMAHA artesia, YAMAHA YSR50, YAMAHA YSR80, YAMAHA XT250T, YAMAHA XTZ600 Ténéré, YAMAHA TZM50R, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TDR50, YAMAHA TDR50, YAMAHA TDR80, YAMAHA TDR80, YAMAHA Cerro 225W, YAMAHA DT200R, YAMAHA DT200R, YAMAHA DT125R, YAMAHA DT200R, YAMAHA DT125R
Used for SEROW225
Reliable DAYTONA.
Used in SEROW225 (4JG4).
OEM new disc + OEM Master Cylinder + Red Pad→ not very effective
OEM new disc + YZMaster Cylinder + Golden Pad = Excellent control and effectiveness
View detail
Fits: YAMAHA TW200 E 4CS All models, YAMAHA TW200 E 5LB All models, YAMAHA SEROW225 4JG, YAMAHA BRONCO 5BT, YAMAHA SEROW225 5MP, YAMAHA TW225E 5VC All models, YAMAHA TW200 E 2JL All models, YAMAHA TW200 5LB All models, YAMAHA TW200 4CS All models, YAMAHA TW200 2JL All models, YAMAHA SEROW225
It was the right choice.
I was originally going to replace the oil with OEM parts, but as a beginner, I didn't know which to get, and the part numbers were a bit fuzzy.:I decided to go with the set. I was very happy to find that all the missing oil seals were also included in the set. It was convenient and Reasonable. View detail
I had my doubts, but I was right to buy it.
[How is it used?
The OEMRear shock on the SEROW225 initially caused Oil seepage. OEMOverhaul." To
I was thinking about it, but since Overhaul was quite expensive, I decided to install the YSS suspension that I was interested in anyway.
Was the one you received as per Image?
The actual product looks cool in the picture. My concern was whether it would interfere with the Frame, which is often mentioned, and whether it could be used for mountain play.
How was your experience with it?
Compared to the OEM, the YSS was the same length as the factory. I installed it on my car body as it was from the factory and there was no interference with the Frame on my WE.
Rear suspension was initially felt to be too hard, so I set it softer with 15 levels of damping in the middle, and also loosened the spring pre-road setting to make it softer.
The Stroke is the same as the OEM suspension, and with some adjustment, it should be able to do exactly what I want.
[Points to note]
During removal and installation, work with care as they are easily scratched as they are removed and attached in a light ring of wisdom.
How did it compare to other products?
Although we can't compare it to the OEM suspension, which was screwed up, the traction is firm. We have a wider range of adjustment.
It makes it fun. I was thinking OEMOverhaul if I didn't have an external suspension, but it was the right decision.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
nothing special
View detail
Fits: SUZUKI Address V100, SUZUKI GSR250S, SUZUKI NZ250, SUZUKI GSR250F, SUZUKI GSR250, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TDR80, YAMAHA MT-25, YAMAHA TDR50, YAMAHA RZ50, YAMAHA SDR200, YAMAHA MT-03 (2015-), YAMAHA DT200WR, HONDA jade, HONDA VT250 Spada, HONDA VTR250, TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR-1
Also for Restore of older vehicles.
[How is it used?
I acquired this product as part of the Restore process when I reached middle age, having acquired the vehicle of my dreams that I was unable to obtain during my Blue Spring days, "Run" "Bend" "Stop" The most important of the "Stop" Focusing on NISSIN for Peace of Mind In
Was the one you received as per Image?
It was the equipment that was equipped with Large body on the vehicle that I admired in the Racer replica era from the late 1980's. It was a product just like Image, and I am thankful for the age when we can easily purchase products with higher performance than those days at Motorcycle accessory stores and Webike.
How did it compare to other products?
The comparison was a longing for those of our generation. "Brembo" When YamahaOEM Product It was
Since then, brembo products have become easier to obtain and there is a wider selection of brembo products compared to Nisshin products. Very expensive."
And OEM Product, when I was allowed to test drive a friend's vehicle at that time. It doesn't work very well." I also have a feeling that it would be better to stick with the OEM, which I have always felt was the best way to go. And, above all, it is impossible to get new parts for the 1987 Motorcycle because the manufacturer has stopped selling them.
It's not that we don't have overhaul kits, but it's just not worth the time, effort, and money for something that doesn't work as well as it should...
in the manner of Works great." Affordable prices." Brand for Peace of Mind." The Nisshin brand is the best choice.
[Points to note]
Please check the compatibility with the Brake Caliper and the standard before purchasing.
When installing, be sure to connect and bleed the brake fluid properly, and be sure to install and maintain the brake troublemaker properly, as it can kill you and others.
[Included Parts:were they on?
All images attached on Webike's Site.
[Was there anything that disappointed you?
Nothing at all, so much so that I don't think it should be compared to the OEM time with Caliper. It works as well as it should." They will give it to you, and you will never go back to NORMAL again.
0Other items that may be useful include
Point and hang of installation
Both point and hang. We make sure each task is done right." It is important to
After temporarily assembling this product in the handlebar and aligning the position balance with the lever on the clutch side, firmly install the brake hose and brake caliper to prevent leakage, and be sure to bleed air from the brake fluid.
[ITEMS TO BUY TOGETHER
Let's replace the Brake hose, Caliper, and Pad.
Even if it is a Large kesa, at the very least, you should have new Brake fluid and hose connection washertc.
[Opinions and requests to Manufacturer
More and more people are restoring various old cars on SNS and YouTubeetc. video sites.
I have a feeling that demand will continue to increase in the coming years, and I look forward to the continuation of Lineup for many years to come.
View detail
Fits: YAMAHA XS650SE-11, YAMAHA XS650SE, YAMAHA XS650_2F, YAMAHA XS650SF, YAMAHA XS650SG, YAMAHA XS650G, YAMAHA XS650SH, YAMAHA XS650H, YAMAHA XS650SJ, YAMAHA XS650SK, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY
Genuine Yamaha Exhaust System Gasket for Yamaha TW200 2020
After a recent exhaust change, the original gasket was just not cutting it and was leaking pretty badly. It was decided to get a brand new geniune Yamaha one. The part was rpetty straight forward to find using the tools Webike provide. The cost of this gasket was very good value so in my basket to order. With a few other parts, the shipping worked out good value too. Shipped via EMS and arrived all perfect in 5 days. The riginal gasket had been used so was not working as it should and had started to delaminate, this new one is perfect. This looks like is it made up of better material than the original one as that had a lot of copper in it. The gasket is nice and smooth but you can clearly see it has a rough essence to it which works well to seal the ports. Fitted really easily too with a lube to help it on it's way. Now the bike exhaust does not blow and I am confident that it will last for a few years more to come. As Long as the exhaust is not taken apart again that is. Great work Webike, thank you very much. View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
Installed on SKYWAVE250 burgman (CJ43A)
The front master cylinder is deteriorating and I bought it instead of OH.
It has bolt holes for mirrors (with Reserver tank), so it may not be suitable for Cowl mirror cars.
It is more like an OEMSpec. ready-made product sold in Rose than aftermarket parts, and the prices are reasonable.
It is made by NISSIN, a trusted manufacturer, so people who do not want to use cheap Chinese products can rest assured.
Since it is basically an OEMSpec, there is no difference in feel between NORMAL and LARGE, and it is a kind of dress-up parts, but it comes with an adjust lever as a byproduct.
View detail
Fits: YAMAHA TW200, YAMAHA TW225, YAMAHA SEROW225
The expectations were so large that ….
Maybe I just don't have the skills, or maybe my expectations were too high, but I felt little effect.
I understood how it works and installed it, so I don't think it is a bad thing.
I'm tempted to try a different number of washers, but it's quite a task, so I guess I'll have to leave it as is for the time being.
By the way, Washer is one piece.
View detail
Fits: YAMAHA SEROW225, YAMAHA SEROW225 WE, YAMAHA SEROW250, YAMAHA TRICKER, YAMAHA TW200, YAMAHA TW225, HONDA XR250 BAJA, HONDA XR250, HONDA CRM250R, HONDA CRM250AR, HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L, HONDA CRF1100L AFRICA TWIN DCT, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES DCT, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES, HONDA CRF1100L AFRICA TWIN, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW225 W
Heel Guard
I think it is a good product for the price. View detail
Fits: YAMAHA Zr SUPER JOG (SUPER JOG), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA SR125, YAMAHA SR125, YAMAHA SEROW XT225 (SEROW), YAMAHA SEROW XT225 (SEROW), YAMAHA RZ50, YAMAHA RZ50, YAMAHA Mate/Mate DELUXE (MATE/MATEDELUXE)
Purchased for Yamaha Bobby50
I bought this for Restore for my Yamaha Bobby50.
It has not been driven yet, but it was installed without any problems.
View detail
enough
The OEM was sagging, so I replaced it. It rides great and doesn't bottom out when flying. I now have a better feel for how a rear tire feels on pavement. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
30W floating.
I have been using it for about a week.
Light is M&H Maz StripeB2 on DMR-JAPAN Multi-reflector used for about 2 years. [Color] Clear (35/36.5w) This is a change from
Direct AC compatible, so it is also compatible with KSR with half-wave rectification.
It blinks in Idling, but lights up normally when the rotation is up.
As for the depth in the Light, there seems to be room for about 5mm.
So far no discoloration deformation etc. of the Lens section, no thermal problems.
I feel it is brighter, but my impression is that it is too White for me and not easy to see.
I would replace it immediately if a VERSION with a lower color temperature is available. (4000-5000K)
Halogen → I floated about 30W with LEDs, so I will be able to increase my warming equipment for winter.
View detail
Fits: その他 , DUCATI Scrambler icon, DUCATI 1299 Panigale, BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH street scrambler, SUZUKI Bam Bam 200, SUZUKI Bandit 1250, SUZUKI Vstrom 1000, SUZUKI Vstrom 250, SUZUKI Glass Tracker Big Boy, SUZUKI V-Strom 650
It looks cute and soothing!
I bought this to hide a Fastener scratch on my Tank and to prevent future scratches.
It looks cute and the fact that you can choose your own position for the back eyes is great!
I am concerned that it will get wet in the rain and fall apart, but so far I have been able to use it without any problems, partly because I have the Cover on!
View detail
Fits: HONDA CB125R, HONDA CB223S, HONDA CB250F, HONDA PCX125, HONDA PCX150, HONDA VTR-F, YAMAHA Helmet in JOG, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA GRAND AXIS, YAMAHA AXIS 90, YAMAHA XT250X, YAMAHA WR250, YAMAHA TW200, YAMAHA TW225, YAMAHA JOG90
Recommendation to dress-up around Handlebar
[How is it used?
Installed on a PCX125JF56. the brake master cylinder cap had deteriorated considerably and was very dirty, so I decided to buy this product which can dress-up the cap.
Was the one you received as per Image?
I am very satisfied with the product, the texture and appearance are better than I expected.
Was the installation difficult?
It's easy, just remove the OEM brake master cylinder cap and put it in the same position. I used the supplied bolt to secure it in place.
How was your experience with it?
I am glad I changed it because it is a One Point around the Handlebar and the Tension goes up every time I drive. It is a little Custom, but I think the quality is very good for this price.
[Included Parts:were they on?
It contains an attached fixing Bolt.
The OEM bolt can be removed with a Phillips screwdriver, but I think the supplied special bolt is hexagonal.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA Cerro 225W, YAMAHA Selo 225S, YAMAHA CELLOW 225, YAMAHA artesia, YAMAHA Cygnus 125, YAMAHA YSR80, YAMAHA YSR50, YAMAHA XTZ600 Ténéré, YAMAHA XT250T, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZM50R, YAMAHA TDR80, YAMAHA TDR80, YAMAHA TDR50, YAMAHA TDR50, YAMAHA DT200R, YAMAHA DT200R, YAMAHA DT200R, YAMAHA DT125R
Replace the old one
This is just my personal opinion. I think it is good for city driving, etc. View detail
To YamahaSEROW.
I bought it to use for SEROW, but I couldn't use it for Initial Model. I could not use it due to lack of confirmation, but I'm glad I could use it for my friend's SEROW. View detail
Fits: HONDA FORZA, YAMAHA Cygnus X, YAMAHA Tricity155, HONDA Rebel300, HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA CB300R, HONDA CB150R, YAMAHA MAJESTYS, YAMAHA BirdCITY125125, YAMAHA AxisZ, YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA XV125SVIRAGO, YAMAHA XT225YSP, YAMAHA XT225WE
One-touch detachable is convenient
It is standard practice to attach a Breather Hose 650mm 6mm Diameter to relieve pressure in the Crankcase,
It is common for the Hose and Breather cap to be directly connected.
The heat from the engine may harden the hose and cause the hose to come off the cap.
When replacing the oil, you can remove it with a push switch, which is convenient for the Large change.
However, the Push Switch will not come off if you press it too hard!
Press all the way down and back up a little to release it.
Sealing of the detachable part is not a problem.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
good heated grip
Second time use kijima heated grip. I used gh08 last time and this time gh10. It is quite easy for install and internal switch makes handle bar clean. Highly recommend this heated grip. View detail
Fits: KAWASAKI KLE400, YAMAHA YF350E(QUAD), HONDA CB500F, YAMAHA YP250/S/A, YAMAHA YZF1000R/THUNDERACE, YAMAHA YFM350R(QUAD), YAMAHA YF400M-FW(QUAD), YAMAHA XZ550D, YAMAHA XZ400/D, YAMAHA XT250T, YAMAHA XT200, YAMAHA XT125, YAMAHA XS400SP, YAMAHA XS250/S, YAMAHA XS250SP, YAMAHA XJ400/D/SP/Z/Z-S/Z-E, YAMAHA WARRIOR YFM350X(QUAD), YAMAHA TW225/E, YAMAHA TW200, YAMAHA TW200E
Idling!
Idling seems to have stabilized?
It seems as if it does or does not ….
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Joint link in Chain
I bought RossiMODEL's Chain, but only LINK was fluorescent yellow color, so I bought Silver color as same as other LINK.
I haven't put it on yet, but I think it will be a calming color scheme.
View detail
Fits: YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA ROYAL STAR TOUR CLASSIC, YAMAHA SR500, YAMAHA SEROW250 (SEROW), YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S, YAMAHA SR400S, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500
No problem
I bought this product because it is a little cheaper than OEM Product. No problem at all. View detail