Reviews
![Billet Side Stand/Series [Long Type]](https://img.webike-cdn.net/catalogue/images/2341/74_0073_image-1_TS.jpg)
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Pigeon thought purchase was carried out from the iron castings of normal. Although the product level was good, it was not able to be used where a center stand is attached. Since the replace from normal was considered, I wanted you to specify that
Pigeon thought purchase was carried out from the iron castings of normal.
Although the product level was good, it was not able to be used where a center stand is attached.
Since the replace from normal was considered, I wanted you to specify that combined use with a center stand is improper.
View detail
It is smallish and the silhouette of the stuck touch is cool. a degree of comfort -- a feeling -- although I felt that it was hard, it is not so much worrisome. Since the position also became somewhat low, I wanted * to which it became good with t
It is smallish and the silhouette of the stuck touch is cool.
a degree of comfort -- a feeling -- although I felt that it was hard, it is not so much worrisome.
Since the position also became somewhat low, I wanted * to which it became good with the guide peg to make three reasons bolt on on the frame outside in the case of attachment.
... There is no crevice which a tool puts in and it suffered troubles! It is a recommend perfect except it.
View detail
The very slim portion was pleasing and purchased. Although a reflector will become large vainly inevitably, it was collected as small as the fender circumference is perfect if it is this product. Attachment was also dramatically easy.
The very slim portion was pleasing and purchased.
Although a reflector will become large vainly inevitably, it was collected as small as the fender circumference is perfect if it is this product.
Attachment was also dramatically easy.
View detail
Fits: SUZUKI GSX1300R Hayabusa
Compared with normal, the meter system became very legible. this is recommended!!! resistance of a wind -- tolerably -- it just said. Sushi and a high grade feeling are drifting without appearance's being also completely bad. When one fault is
Compared with normal, the meter system became very legible.
this is recommended!!! resistance of a wind -- tolerably -- it just said.
Sushi and a high grade feeling are drifting without appearance's being also completely bad.
When one fault is animation photography, it is that a front black portion is interfered with it for a while.
It was a five stars when there was no it.
View detail
Fits: SUZUKI GSX1300R Hayabusa
By low value, a form also thinks that it is good good touch!!! The character of front hayabusa is a joke nonchalantly (^o^)
By low value, a form also thinks that it is good good touch!!! The character of front hayabusa is a joke nonchalantly (^o^) View detail
When attached to GSR400, high speed operation is a cinch. However, Wright's light from the inner side of a screen ... It is whether although it is not worrisome daytime, it is dazzling (although it got used ...) at night. Although some prices
When attached to GSR400, high speed operation is a cinch.
However, Wright's light from the inner side of a screen ...
It is whether although it is not worrisome daytime, it is dazzling (although it got used ...) at night.
Although some prices are stretched, it is one satisfactory article.
View detail
Fits: SUZUKI DR-Z400S, SUZUKI DR-Z400S, SUZUKI DR-Z400S
Since he wanted the biggest possible carrier, this carrier was used compared with other goods. First, although there was nothing also difficultly very about attachment, when it was an external muffler, the stay by the side of the lower right interfere
Since he wanted the biggest possible carrier, this carrier was used compared with other goods.
First, although there was nothing also difficultly very about attachment, when it was an external muffler, the stay by the side of the lower right interfered, and there was the necessity of deleting stay.
Although he would like to attach a five stars to reinforcement or loading nature, it is this evaluation under that a color cannot be chosen and the above-mentioned situation.
But I think that they are the goods inexpensive enough [ efficient ] as a carrier of original also in cost.
Incidentally, since black paint application of a photograph was private paint application, it was dirty, but paint application of original white was a beauty!
View detail
Z750FXII was equipped. Since there was a representation conformity vehicle type with Z1, the size of a screw hole, the gap of the screw hole, etc. thought that they would be OK, and it purchased them. There was not a bit deviation, either. It
Z750FXII was equipped.
Since there was a representation conformity vehicle type with Z1, the size of a screw hole, the gap of the screw hole, etc. thought that they would be OK, and it purchased them.
There was not a bit deviation, either.
It is PITARI conformity.
Now, it is not necessary to bend a number plate.
^^;. Mr. Doremi, thank you.
View detail
He thought that he would make a rear view into a race ish, and it attached. It can attach, if attachment is also easy and it is as long as 30 minutes. Since the fender and the chain case are a different body, maintenance of a chain can also be per
He thought that he would make a rear view into a race ish, and it attached.
It can attach, if attachment is also easy and it is as long as 30 minutes.
Since the fender and the chain case are a different body, maintenance of a chain can also be performed comfortably.
Although a rear shock is guarded from a stepping stone or splashes of mud, the valve effect of a running wind is not known.
Since carbon is used, it is closed by the appearance of a rear side and is visible.
They are quite recommend goods in appearance serious consideration.
View detail
It is just going for a gas tank rear end part to attach a crack by the fastener of wear, the buckle of a belt, etc. easily. In order to lose worries about the crack, it attached and carried out. although mounting arrangements are stopping with dou
It is just going for a gas tank rear end part to attach a crack by the fastener of wear, the buckle of a belt, etc. easily.
In order to lose worries about the crack, it attached and carried out.
although mounting arrangements are stopping with double-stick tape, and an easy thing with that right, since the gas tank of R6 is carrying out complicated form, in the case of attachment, the newest cautions are required for it.
Attachment has added the double-stick tape which considered an emergency thing and was purchased separately, although attached double-stick tape is sufficient.
The comment to attach had the beautiful pattern of twill carbon, and the one whose tank pad is seldom liking was also satisfactory.
The accuracy of a tank pad is high and the attachment exactly united also with complicated tank form is possible.
View detail
He wanted the nostalgic large-sized head lamp, and it purchased a long time ago. Although major things, such as CIBIE, were very expensive and a hand did not come out, since the goods here were reasonable, they were able to be tried freely. Once,
He wanted the nostalgic large-sized head lamp, and it purchased a long time ago.
Although major things, such as CIBIE, were very expensive and a hand did not come out, since the goods here were reasonable, they were able to be tried freely.
Once, although it is a catchphrase with a multi-reflector, the difference from an honest ordinary lamp is not understood.
Since it does not become bright specially, I consider that it is better not to carry out excessive expectation.
(Although it does not become dark conversely or does not become precocious --) I think that brightness up is also expectable if it changes into a higher-quality bulb since the quantity of light changes considerably by the bulb used actually.
If bought with appearance priority from a function, a price will rather think that it can be convinced only to a price.
Although I was ordinarily satisfactory for the time being, since the place which should be mentioned especially was not found, either, it was considered as three stars.
View detail
The measure against water proof is appropriate anyhow. Although rubber packing is inserted into the rear plate, it is standard and is already shifted, and it is also the rectified last configuration and is full of crevices. And it is anyhow poor s
The measure against water proof is appropriate anyhow.
Although rubber packing is inserted into the rear plate, it is standard and is already shifted, and it is also the rectified last configuration and is full of crevices.
And it is anyhow poor structure of it burying by a caulking agent in the crevice, and being [ deceive and ] in it afterwards, etc.
Although the circumference of a lens is also processed with the caulking agent, it could be called the level which there are a thick part, a part of the one skin, etc. and has been set to normal use and out of which a gap problem comes.
Cautions are required, to are unreserved and attach the main part itself.
View detail
Fits: SUZUKI RV200 Bang Bang, SUZUKI Jebel 125, SUZUKI Jebel 200, YAMAHA MAJESTY250 [Majesty]., SUZUKI RV200 Bang Bang, SUZUKI Jebel 125, SUZUKI Jebel 200, YAMAHA MAJESTY250 [Majesty].
The line which has come out of the pure ignition coil is cut on the way! It carries out and connects the cord made from NGK through a relay plug. the translation in which a cord of normal remains several centimeters inevitably although not-knowing pur
The line which has come out of the pure ignition coil is cut on the way! It carries out and connects the cord made from NGK through a relay plug.
the translation in which a cord of normal remains several centimeters inevitably although not-knowing purchase has been carried out with such configurations -- -- it does not come -- with what it is effective -- -- Saki's honest comment which saying attaches.
Since work was troublesome, only iridium plugses are exchanged previously and it tries on a normal cord.
On experience, since sparks fly from the angle part of a plug, the iridium plugs in which an electrode is extremely thin must be advantageous in a jump of sparks.
The low rotation region became forcible, so that the imagination was attached and I understood immediately.
there is especially little fogging at the time between [ of a winter season ] the colds, and it is brilliant to stabilize and idle from immediately after start up! honest, although cords (recently) were also exchanged behind -- completely with no change.
A cord is whether a color is colorful and a parenthesis is good somehow? Probably, the direction purchased with the intention of an about does not need to carry out disappointed.
The cord was a regrettable result because the plug was good.
Therefore, the star was relatively set to three.
View detail
It attached to BIMOTA HB3 which stacked the engine of CB1100F. First of all, when starting the engine, startability acted to KYURURU and Bon as Kougami clearly from KYURUKYURURURURU~ and Bon. Next, it is the touch whose strange valley which could
It attached to BIMOTA HB3 which stacked the engine of CB1100F.
First of all, when starting the engine, startability acted to KYURURU and Bon as Kougami clearly from KYURUKYURURURURU~ and Bon.
Next, it is the touch whose strange valley which could feel power up enough and suited per 6~7000 rotation also at the time of acceleration was lost.
although it is that (this being powerful and carrying out right now -- it is) which attaches the full power kit to DB1 and became violent with intense ignition aside from this, truly, it can blow forcibly smoothly and a 4 cylinder goes up.
When [, such as blinker lighting, ] voltage falls suddenly, an engine is just going to go out by idling regretfully [ the thing / one ].
Since there is also a problem peculiar to these vehicles, he does not think usually generating, but you have to take care about sag.
If a cause is known, I will not consider not at all.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA XR50 MOTARD, HONDA APE 50, HONDA XR50 MOTARD
It attached to the ape 50. The loss at the time of gear changing decreased considerably. Moreover, a clutch becomes somewhat hard. If it is maintaining, I will think that it does not go out, but the recommend of also strengthening a clutch wir
It attached to the ape 50.
The loss at the time of gear changing decreased considerably.
Moreover, a clutch becomes somewhat hard.
If it is maintaining, I will think that it does not go out, but the recommend of also strengthening a clutch wire is carried out.
View detail
wiring is too short although it is attachment -- it is . A line must be connected on the way and must be carried out. Although it is operation, the gear ratio of a Fifth-gear Sixth gear is near, and it takes time. Regrettably we cannot not muc
wiring is too short although it is attachment -- it is .
A line must be connected on the way and must be carried out.
Although it is operation, the gear ratio of a Fifth-gear Sixth gear is near, and it takes time.
Regrettably we cannot not much recommend you.
We recommend you the indicator of GIpro DS.
Since wiring is a coupler on type for a long time, it is dramatically easy.
View detail
Fits: HONDA Dio XR Baja, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO
Since the front was clear, he wanted to unite and it purchased. -- Refreshed *
Since the front was clear, he wanted to unite and it purchased.
-- Refreshed *
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50
It attached together with the oil shower head of the company. Since the nipple of an 8-mm hose is high at M10, I think with a hose that this price is cheap. However, the die length of a hose is lacking even to the oil catch tank which I have attac
It attached together with the oil shower head of the company.
Since the nipple of an 8-mm hose is high at M10, I think with a hose that this price is cheap.
However, the die length of a hose is lacking even to the oil catch tank which I have attached, and I will consider it as this evaluation.
Moreover, I would like you to use a 6-mm hose by M8 safely.
View detail
Fits: HONDA CB50, HONDA CB50, HONDA Ape 50, HONDA Nauty Dax, HONDA solo, HONDA KITACO SPLCylinder head(Old model and New model), HONDA XLR80, HONDA XL80, HONDA XL50, HONDA XE75, HONDA XE50, HONDA TL50, HONDA R&P, HONDA RTL50S, HONDA NSF100, HONDA XR80, HONDA XR50 MOTARD
It attached together with the 80-cc bore up kit high cam of the other company. The pure twist was somewhat hard although the engine performance was not found well. Since it can purchase at this price rather than anything, in the case of high cam i
It attached together with the 80-cc bore up kit high cam of the other company.
The pure twist was somewhat hard although the engine performance was not found well.
Since it can purchase at this price rather than anything, in the case of high cam introduction, the recommend of the combined use with a strengthening valve spring is carried out.
View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
It attached to the ape 50. A description is very intelligible and its appearance is also the smartest. The taste of a tuning engine comes out (smile). Since it attached simultaneously with a bore up high cam, an effect is not known well. S
It attached to the ape 50.
A description is very intelligible and its appearance is also the smartest.
The taste of a tuning engine comes out (smile).
Since it attached simultaneously with a bore up high cam, an effect is not known well.
Since a cam is only soaked in an oil pool and I think that high rotation is painful, is a length type one gentle to an engine?
It is very a recommend although it is more expensive than other manufacturers' shower head.
View detail