They are necessaries at tanks which rust easily, such as the old vehicle. Before fine rust blocks a carburetor, it uses as preventive measures.

They are necessaries at tanks which rust easily, such as the old vehicle.
Before fine rust blocks a carburetor, it uses as preventive measures. View detail

It is used even if it changes with VTR250 and the hornet 250. Since both of motorcycles do not have good structure of a helmet holder, they are found useful very much. - - which cannot be removed since the portion of a screw will overlap and they

It is used even if it changes with VTR250 and the hornet 250.
Since both of motorcycles do not have good structure of a helmet holder, they are found useful very much.
- - which cannot be removed since the portion of a screw will overlap and they will not enter a driver at all if those who cannot do maintenance since it can attach easily with one driver also close problem-less - Locke -- uniting with a car body and, since - appearance attached also to the circumference of a handle since it is not large is good,
The above advantages which can adjust thickness with the price and rubber to which it can be convinced are considering making - which does not look to the wind it attached since there was not pure Locke like a padlock.
If there are even the place and thickness to attach, a recommend will be carried out by all means.
Since it would attach to the handle right twist of a hornet and he would like to act to a mirror as Locke now, covering it, a helmet and Locke have been connected by the pure wire lock.
Since a pure holder cannot use its own motorcycle easily, it is not worried, but for some persons, a price may feel it high. View detail

It is a driver indispensable to maintenance of a narrow part. However, since power seldom enters, it seldom turns to the part which needs torque.

It is a driver indispensable to maintenance of a narrow part.
However, since power seldom enters, it seldom turns to the part which needs torque. View detail

Only by the disk lock, it was uneasy and purchased for combined use. I think that attachment is easy, and it can equip with it if even its thickness of a grip suits. Although it has ridden on the hornet, the compactness made with a disk lock under

Only by the disk lock, it was uneasy and purchased for combined use.
I think that attachment is easy, and it can equip with it if even its thickness of a grip suits.
Although it has ridden on the hornet, the compactness made with a disk lock under a narrow sheet is kind.
Since it is a handy price, I would like to carry out a recommend to the direction which is looking for the lock compact in addition to a disk lock. View detail

It uses for timing picking at the time of cam change. Moreover, it is very convenient, if there is a sheet since the characteristics of a cam are also known well.

It uses for timing picking at the time of cam change.
Moreover, it is very convenient, if there is a sheet since the characteristics of a cam are also known well. View detail

repair of the harness over which it mourned -- it is required when newly making wiring of the old vehicle. They are goods which cannot be very much hard to obtain in a home center.

repair of the harness over which it mourned -- it is required when newly making wiring of the old vehicle.
They are goods which cannot be very much hard to obtain in a home center. View detail

It attached to the trial vehicle and the trail vehicle. It is satisfied with firm structure.

It attached to the trial vehicle and the trail vehicle.
It is satisfied with firm structure. View detail

When searched with whether there are any good-looking methods in connection with glove BARESU of GPZ900R, this product stopped at eyes. Although what kind of thing or a true place does not turn out to be a NASA type, a design is very well pleasing.

When searched with whether there are any good-looking methods in connection with glove BARESU of GPZ900R, this product stopped at eyes.
Although what kind of thing or a true place does not turn out to be a NASA type, a design is very well pleasing.
It carries out by being strong for rusting, and die length is also suitable so that a bolt may also be the product ? made from a stainless.
Although it is a set of/[ for glove BARESU ] for /mirror-lesses for /upper cowls for /side covers, since its own car is not made into the upper cowl mirror-less, four sets have remained.
Since it seems that a rose can also be purchased, I think the kana which could be used there. View detail

It is hanging on arrangement of T type wrench at the tool box. It is found useful if attached to a cart.

It is hanging on arrangement of T type wrench at the tool box.
It is found useful if attached to a cart. View detail

They are necessaries when the vehicle type, especially clutch with which it is necessary to lubricate a wire are a wire type. It is the shin without being thought in lubrication, without using this although there are some leaks in the case of lubricat

They are necessaries when the vehicle type, especially clutch with which it is necessary to lubricate a wire are a wire type.
It is the shin without being thought in lubrication, without using this although there are some leaks in the case of lubrication. View detail

When removing the bolt currently bound tight with incomprehensible superfluous torque, T character wrench is effective, but this product is more user-friendly than the conventional T character. equipping a handle part with a bit -- a long handle -- --

When removing the bolt currently bound tight with incomprehensible superfluous torque, T character wrench is effective, but this product is more user-friendly than the conventional T character.
equipping a handle part with a bit -- a long handle -- -- torque control becomes easy by having and making it the hand .
It is a tool it is [ a tool ] indispensable to a sunday DIYer like itself. View detail

Since it had presumed from the beginning when it would be a yoshimura, if it was a suzuki vehicle, an opportunity bending titanium cyclone stainless is purchased due to a budget with no problem again. It is that it is quiet more than he thinks that it

Since it had presumed from the beginning when it would be a yoshimura, if it was a suzuki vehicle, an opportunity bending titanium cyclone stainless is purchased due to a budget with no problem again.
It is that it is quiet more than he thinks that it attaches by itself and starts the engine.
I felt that it was increasing for the heavy low.
When it runs, a yoshimura set can be heard and it is the highest.
Moreover, it is light anyhow.
About 1/3 weight of normal.
It can ride and feel.
If it says well, it will be an honor student muffler.
It does not become a nuisance to the neighbors and their eyes are not fixed on a police motorcycle, either.
It is slightly unsatisfactory if it says bad.
May an exhaust sound be loud to a slight degree? View detail

Although I feel somehow that the omission became good by having changed, the state where a low speed is not different from former, either and rides easily is maintained. Tone quality is touch that low-pitched sound may be emphasized a little. Ther

Although I feel somehow that the omission became good by having changed, the state where a low speed is not different from former, either and rides easily is maintained.
Tone quality is touch that low-pitched sound may be emphasized a little.
There is no touch that it is not much noisy.
Although it was a talk with OK in bolt-on about attachment, the way where it used the attached plate since the hole site of the bolt differed in height a little may say. View detail

Since the back became painful when long distance length distance ran just for a moment when normal, the handle of 883 was exchanged. Work is easy and cables are settled finely. Appearance of texture is also well more beautiful than normal. It

Since the back became painful when long distance length distance ran just for a moment when normal, the handle of 883 was exchanged.
Work is easy and cables are settled finely.
Appearance of texture is also well more beautiful than normal.
It seems that however, it is too close to 170-cm me, and between normal is the best.
An overload is applied to the opposite side waist to which the upper half of the body became easy too much, and the waist is becoming somewhat painful shortly. View detail

It has attached to CB400 SF-Spec2. Incidentally it is high. Exchange of the brake hose was required after all. 3-cm up was fairly large. It attached in order to use it for a gymkhana, but from the pure handle, operativity became good and b

It has attached to CB400 SF-Spec2.
Incidentally it is high.
Exchange of the brake hose was required after all.
3-cm up was fairly large.
It attached in order to use it for a gymkhana, but from the pure handle, operativity became good and became easy.
Moreover, touring or a posture becomes easy and he can feel easy now also about a long distance more. View detail

When it exchanged for the handlebar of the company, since it was needed here, it purchased together. Texture also becomes a one point and is well pleased with gold. Since bar end for exclusive use has come only out of this, I am just going to want

When it exchanged for the handlebar of the company, since it was needed here, it purchased together.
Texture also becomes a one point and is well pleased with gold.
Since bar end for exclusive use has come only out of this, I am just going to want you to increase a variation to a slight degree if I may be allowed to wish so much. View detail

It attached to 07 sherpas. Since it attached to the pure grip, the work which makes a hole is required. Since there was no description, in the thing as which this may be sufficient, it was uneasy and the worst did work excitedly as it is grip exch

It attached to 07 sherpas.
Since it attached to the pure grip, the work which makes a hole is required.
Since there was no description, in the thing as which this may be sufficient, it was uneasy and the worst did work excitedly as it is grip exchange.
The clutch side is more smallish, and if a hole is not made more greatly, throttle operations will be affected for the axel side.
Probably, it will be better to exchange for the grip of an open end type to finish finely.
It interfered in neither a pure lever nor F brake reservoir. View detail

It attached to 07 sherpas. For high flasher prevention of an LED flasher, it is recommended so that IC relay of DRC or a DRC flasher register may be purchased separately and may be attached. It was in parallel with the existing front blinker, conn

It attached to 07 sherpas.
For high flasher prevention of an LED flasher, it is recommended so that IC relay of DRC or a DRC flasher register may be purchased separately and may be attached.
It was in parallel with the existing front blinker, connected, and, in my case, was satisfactory.
The color chose black.
Since an LED flasher can be removed easily, it takes a change of air, if it gets bored with a color and only XC protector will be exchanged. View detail

Silver is chosen so that it may not become the same as a body color, and it may be conspicuous. Since appearance is visible to a race ish (>=竏?=), it is b.

Silver is chosen so that it may not become the same as a body color, and it may be conspicuous.
Since appearance is visible to a race ish (>=竏?=), it is b. View detail

Since the gripper seat cover was used and it had said mind by other motorcycle, it purchased for two-set Sakka. But it is hard to slide, it is easy to carry out a weight shift. It is recommended.

Since the gripper seat cover was used and it had said mind by other motorcycle, it purchased for two-set Sakka.
But it is hard to slide, it is easy to carry out a weight shift.
It is recommended. View detail