Reviews
Filter part is pricey
If you want to put a Filter between the Fuel lines, it is difficult to bend the Hose if it is short, but if it is angled like this product, it will be neat. View detail
Used to supply Gasoline as a startup check
Installed between the connection from a simple Gasoline container to Carburetor to prevent CarburetorOverflow.
Effective without CarburetorOverflow after adding Filter.
View detail
I would like to make Carburetor a Large thing.
I put it on after purchasing a slightly more expensive Carburetor to prevent Rust and Garbage from getting into the Fuel Tank. The price is reasonable and it is well made and this is the third time I have purchased this product. View detail
You can see the inside of the Filter.
During some carburetor adjustments, I found a piece of a very Smallest Rubber? in the Float room. I did a lot of research and couldn't find the source so I decided to put a Filter on it.
This time, I decided to use a CUB, which has a matching hose bore diameter, small size, and light weight without magnet.
Bracketetetc. is not included, so you have to prepare it by yourself. Installation itself was easy and did not affect the surrounding lines even inside the Leg shield.
If you are attaching a Filter for the first time, you should be careful not to let the protruding part of the Bracket or Tie Wrap that you are attaching hit other Lines.
The product's mechanism is an orthodox mesh system:even when the Axel is opened by the governor, Gasoline passes through normally and the Engine does not cough.
The product appearance is also well finished.
The FilterBody shows the Manufacturer's name and the direction of fuel flow. The display is not sealetc., but a raised workpiece, which is good because seal can peel off or become dirty due to engine heat.
The product was securely packaged and sealed. I think this is necessary for products related to hazardous materials.
As a buyer, this is the kind of thing that makes me happy. In the past, an import from another Manufacturer purchased at another Site was sent to us just in a Vinyl bag.
Although the cause of this installation was not found in the end, it was found that it was not foreign matter from the fuel line by installing this product. I think another merit of this product is that you can see the inside of the transparent filter and mesh type to check for foreign substances.
View detail
Good quality item
The fuel filter keeps fuel running smoothly to the engine. Changing the fuel filter keeps the injectors clean longer, which means more power and better gas mileage. Bring your car or truck to any of our stores for a fuel system cleaning to get the most power from your engine. -(high quality product) FOR PERFORMANCE USE View detail
8mm petrol filter COMPLETE
Good petrol filter with fine mesh inside.bulding quality good with thicker plastic. This is 8mm outer diameter hose outer connector. View detail
Petrol filter cartridge
This is petrol filter with outer diameter 6.5mm. good quality including stanless steel filter mesh inside. Recommended View detail
It is made by KIJIMA, so it is better than nothing.
[How is it used?
Used for Af09.
Was the one you received as per Image?
Yes
How was your experience with it?
It is made by KIJIMA, so it is better than nothing.
[Points to note]
I would recommend checking the Φnumber of Hose before purchasing.
How did it compare to other products?
Variation is also abundant, so I thought it should be made by KIJIMA….
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Used for COLLEDA50
It has a Cup on it and you can see rust accumulating in the bottom, which is fun to see the effect. There are arrows engraved on the Body for the direction of fuel flow. the COLLEDA50 Hose has a 5mm inner diameter, but it felt just right. This Filter is disposable, so I ordered the next one. if you have Space, I recommend it because of its effective shape. View detail
I like the way it looks.
The Fuel Hose is Black and invisible. I bought it because it seemed to have a good evaluation here to prevent foreign object contamination.
It is a good product because you can see inside and check the status, and it can be detached and disassembled for cleaning.
It is somewhat heavy, but is it reinforced to prevent damage? I thought so.
View detail
It helped me in a tight spot.
I used it on a Yamaha '82 POPGAL that a friend of mine had requested for repair.
I removed the tank and put a tacho string through the nut and shook it well to remove the large rust, but it was difficult to remove the thin rust. I had a few filters on the parts shelf in the garage, but I couldn't install the cover because it was hard to get into the POPGAL's narrow frame gaber.
It is really easy to use, and without this Filter, I had to turn the fuel Pipe longer to keep it from kinking, which is a big help, and it seems to collect a little rust in the Tank, which is great, and the Filter is transparent so I can see it better and replace it when it gets dirty.
It would be helpful to have a product with a little more capacity.
View detail
Filter exchange
Easy to install and a good product. View detail
carburetor-friendly
Used for TACT CourregesA-AF09 in 1985.
My brother-in-law gave me a TACT almost 30 years after it was scrapped and I serviced it, but the inside of the tank was rusty. I cleaned it with Gasoline and wiped it down with Dustcloth, but I could not remove the fine rust.
The rust and garbage are removed very well, but I think I need to replace about 2 more tanks because there is a lot of rust on the tanks.
Installation takes less than 10 minutes because all you have to do is insert a spot between the tank's gas outlet and the carburetor's fueling port. It is recommended that you check the outer diameter of your car's gas cock and the space available for installation before purchasing the filter.
View detail
Foreign objects can be visually identified.
There was a sign of rust inside the Fuel Tank, so I installed it to check.
The high transparency and clear view of the interior made it easy to check for foreign objects.
I was worried about deformation due to heat, but there were no problems even after running around all day in mid-summer.
View detail
Nice touch!
Replaced because OEM was deteriorating.
It became transparent so that I could see Gasoline flowing and visually moe Point!
Cheaper and more satisfactory than OEM
Of course, the OEM band cannot be used because the size is different from OEM, but to prevent loss, it was attached as it is.
I'm not sure about the durability yet, so 3 stars.
View detail
Rust is visible!
Unlike disposable Filters, this is a cleanable Magnet In and is a safe choice for an older iron Tank. View detail
I use it for Fuel Filter for BALIUS.
BALIUS is a motorcycle that is difficult to install a fuel filter because it sometimes stalls like it lacks gas when using PaperType or other mesh type filters depending on the individual variability of the vehicle and the condition of the intake system. However, after changing to this filter, I have not experienced the gas shortage condition even once, and it has settled down now. View detail
It's cheap and it's good.
I think it will be disposable, but I can see the flow rate of Gasoline, and I can also see if there is Garbage or not, and I can see the Hadrill, but I don't know for how long, but this hand may eventually become invisible with yellowish brown. I don't know how long it will last, but I am satisfied with the price, which is quite low. Of course, it is easy to install, and the two-stage hose mounting is a big help. View detail
Fine rust powder passes through.
Take it for a spin on the Hose from the Fuel Cock to the Carburetor. It is better than nothing. By the way, the rust powder of Tank passes through and enters the carburetor. Plastic deteriorates quickly over time, so we keep some in stock in case it breaks down. Replacing the fuel Pipe is quite tricky as it seems to be a simple but important part. View detail
The packaging is too messy.
The product itself looks good and well made, but the packaging is too messy. When I opened the box after receiving the product, the product was out of the Package.
The package was stopped at the four corners and at the stapler, so it was not popped out during shipping or anything like that.
I am concerned that there may be a defect as it seemed to be rolling around in the corrugated cardboard when it was given to me by the shipping company.
View detail