It backfired a little, but I was able to lubricate it successfully.

Lubricated when replacing Clutch Wire. Used Bell HammerSpray. View detail

Before you run out of Wire!

If you don't have a Nozzle made by Gold on hand, you might consider purchasing one.
It is easy to use, but for those who don't maintain it that often, it tends to be a hassle and useless.
Well... I think it would be better to have it to give a sense of maintenance, or not. View detail

KIJIMA Wire Injector

I have long wanted to buy a cable lubricant, the choice fell on KIJIMA. I liked everything about the material, it is convenient to work with it. Function perfectly performed, good value for money...
I have long wanted to buy a cable lubricant, the choice fell on KIJIMA. I liked everything about the material, it is convenient to work with it. Function perfectly performed, good value for money...
-------------------------------------------------- -------- I have long wanted to purchase a lubricant for cables, the choice fell on Kijima. According to the material, I liked everything, it is convenient to work with it. The function is perfectly performed, good price/quality ratio ... I have Long Wanted to Buy A Cable Lubricant, The Choice Fell on Kijima. I Liked EVERYTHING ABOUT THE MATERIAL, IS Convenent to work with it. Function Perfectly Performed, Good Value for Money ... Powered by Google Translator View detail

It can be used normally

Used for maintenance of Clutch Wire.
Parts cleaner, OilCleanerretc., and other smooth products can be used without any problem.
When I used Super Wire Grease from YAMALUBE, the grease was so thick that I could not use it properly. View detail

This is as good as it gets.

It is easy to use as a tool, and actually using it changes the resistance when pulling.
However, if the resistance changes, Wire must have deteriorated to some extent, so I stopped using it after that because I felt that it would be better to replace it properly than to cheat by using a fake blade. View detail

Items to Buy

Grease does not leak at all and can be properly lubricated all the way to the end.
We recommend that Type vehicles with adjustments in the middle of the Wire lay Dustcloth, as there will be a slight leakage from there.
Note that the type with Dust Boots on the Clutch Side must be removed, otherwise it will only increase the internal pressure and will not come out.
Once the wire is pushed out from the Clutch Side, it is just a matter of stroking the wire by hand and letting it blend in. View detail

[the attached vehicle type and mileage] -- vehicle type: -- benly 90S (frame numbered machine: HA03-1600XXX) mileage: -- it purchased to the grease up of about 15000-km [reason for purchase] wires (an axel, a front brake, a clutch). [Comment and cauti

[the attached vehicle type and mileage] -- vehicle type: -- benly 90S (frame numbered machine: HA03-1600XXX) mileage: -- it purchased to the grease up of about 15000-km [reason for purchase] wires (an axel, a front brake, a clutch).
[Comment and cautions at the time of attachment] There is no fault in a motion of wires and I thought that grease up might still be unnecessary.
However, the slide became good, so that he was surprised, and after grease up became very good [ a usage feeling ].
Although the grease up work of a wire was not difficult and was carried out, troubles were suffered comparatively.
After a fundamental work procedure loosens and removes a wire, grease is only poured in using this product (wire injector).
In my case, pains was taken over pouring of grease.
Attaching a wire injector certainly was a hang which works well.
It seems that it is good to once stop pouring and to reattach an injector when grease blows off.
In order that a tool might remove wires other than an injector, the open wrench (8, 10, 12 or 14 mm) and the phillips screwdriver were used.
Special care of the grease up work of a brake wire and a clutch wire was not carried out.
However, because the die length of the wire which can be pulled out was short, attachment of an injector was moved by carrying out difficulty for some.
An axel wire (in the case of the benly 90S) has an exit in the inside of a carburetor.
Grease up was performed after removing the throttle bubble portion, before pouring in grease.
In addition, the KURE silicon grease mate which invades neither a rubber nor resin was used for grease. View detail

They are items indispensable to oil supply of a wire for the time being.

They are items indispensable to oil supply of a wire for the time being. View detail

I, beginners, was also able to do it very in a user friendly manner! Since it is also a place to often maintain, grease and this find it useful.

I, beginners, was also able to do it very in a user friendly manner! Since it is also a place to often maintain, grease and this find it useful. View detail

You do not have, if it is those who do light maintenance by themselves, and isn't loss carried out?

You do not have, if it is those who do light maintenance by themselves, and isn't loss carried out? View detail

-- kijima: -- KIJIMA:wire injector product number: -- in the case of maintenance of 302-206 correspondence vehicle type wide use description-of-item blue twin type wires, lube, such as wire grease, can be poured in efficiently --

-- kijima: -- KIJIMA:wire injector product number: -- in the case of maintenance of 302-206 correspondence vehicle type wide use description-of-item blue twin type wires, lube, such as wire grease, can be poured in efficiently -- View detail

Maintenance！

[How is it used?
Brand：YAMALUBE:YAMALUBE
Wire grease
Item number:907934006000
https://www.webike.net/sd/3460985/
I used it with

How was your experience with it?
This was my first time with Maintenance, and I felt secure because it was firmly fixed in place! View detail

HANG is there.

It is sometimes difficult to use the Oil in a normal way.
It will go in when you adjust the tightness and the amount of oil blown out.
It may be a matter of familiarity.
It didn't work at first, but now I know how to use it. View detail

Nozzle fits perfectly in the 180ml Yamalube

"Yamaha Yamalube Wire grease Together with.
Nozzle fits the bill!
Although the wire was not completely pinched and leaked a little, it was possible to chain-clean with no problem in Large sturdy degree if Dustcloth was attached to it.
View detail

Kang Tan!

I bought it to lubricate the Clutch Wire

It's very easy!

Clutch Wire clipped the Thailand coil from Lever and lubricated the lubrication hole Just push the tip of the oil in and pour it in!

It took about 10 minutes to get the job done with no particular splattering!

I think there is a huge difference in efficiency and ease of doing things with and without them View detail

I bought this one because of the cool colors. That's all.

There are so many similar injectors. I think they're all by the same factory in China. So why buy this one? I bought it simply because of the cool colors. The red silicone or rubber inside looks different from others. That's all. In terms of functionality, they're all the same. View detail

It makes working easier

I tried to purchase it because it was easy to inject lubricant oil to Wire and I tried to avoid it.
Work has become much easier.
It is recommended.. View detail

Convenient

I was concerned about the touch of the needle of Speedometer of my previous car GB 250 CLUBMAN and purchased it for trying CableMaintenance.
Usage frequency is small but convenient.
Grease came out from the opposite side of Cable vigorously and it felt good.. View detail

It is not durable

I have been using it for 15 years..

Although a little hang is necessary for fixing with SingleScrew clasp,
Stable lubrication is possible if you grasp hang.

Even if you say hang, just plug it as far as possible and tighten your eyes.
in short "I will seal it anyway" only.

Same etc. I have never compared strictly with other companies' products, but it is terrible durability.
First of all, Rubber will not be sloppy, torn or collapsed.
15 years I touch various solvents but it is not altered at all. This is a surprise.
Not only the strength of Aluminum Parts but also Anodized is tough and does not feel years.
It's amazing.

It is flashy with Nan Sense color scheme, but this Nan Sense is very
Reliable, rather it looks cool.
Although it is said that you will like gaudy things every year as you get older, but with that
There is none. maybe. View detail

By WireMaintenance

This is convenient, I have not tried injecting lubricant from other parts in Imp, but it is one way. When fixing Wire, it is about 5 mm in tip of wire Tube? Also fix it together, and when injecting lubricant usually from upper hole, hold down Body with Dustcloth and turn the injection hole part as possible as possible Push the lubricant Spray button little by little, inject it, otherwise it will spill out.
Lubricant will flow from the bottom of the Wire if it can be confirmed that it is poured little by little. It is convenient to have it. View detail