Reviews
To Refresh around Fuel Cock
[How is it used?
I purchased this product to refresh the Fuel Cock area of my 27 year old SEROW225 WE.
Thankfully, Yamaha still sells the 1997 SEROW225 WE Fuel CockAssembly, but the price tends to be higher.
So, we searched Webike to try CostCut using the available Universal Product, and decided to purchase a Fuel hose made by KIJIMA, which we have been using for a long time.
Incidentally, the 1997 SEROW225 WE will need three fuel hoses, each PipeFuel1 for $715. Pipe2 for $1,331. Hose for $275. for a total of 2,321 yen. (The "Spring Compression" used for Pipe2 will be used again.) 。
Did you receive the item as per the Image?
It has the same inside diameter as the SEROWOEM Product and is a supple and flexible fuel hose, which is natural since it is new.
Incidentally, the OEM fuel hose we had been using up until now had no cracks, but it had deteriorated over time and was in a bad shape, making us glad we replaced it.
How did you like it?
We replaced the above-mentioned CaChicatiHose with this flexible product and everything is better.
The two-layer Type is a reliable and secure product that is resistant to breakage even when curved.
[Points to note]
Several different sizes of HoseLineup are available in the same package, so be sure to check the inside diameter of the hose you want to replace and order the size that fits.
Too thick will increase the risk of fuel leakage, and too thin will affect fuel flow.
How did it compare to other products?
My personal impression is that clear type fuel hoses in pink, etc. tend to harden easily, which is not a problem for those who do not neglect daily maintenance, but for a lazy person like me, a product like this with high durability and weather resistance would be safer.
Other items that would be helpful
Point and hang of installation
I am not sure if I am doing it the right way, but if I apply a small amount of silicon grease during installation and insert it into the cook, it works Smoothly.
As a matter of course, let's pass the Clip through the hose first before jointing the hose.
The most Large-picture work may be to insert it firmly and prevent it from coming loose with a firm hose band.
[ITEMS TO BUY TOGETHER
Hose clip if you have a new fuel hose. (Hose Band) may also be better to purchase new ones to account for age-related deterioration.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible, as it is necessary to replace the fuel hose on older motorcycles.
View detail
I can't find anywhere that sells parts.
This is very helpful since there are no Motorcycle parts dealers nearby,
The product is cosmetically excellent.
View detail
Used to replace Fuel Hose on GPZ900R.
The Hose connecting NINJA's Fuel Cock to the carburetor is hardened,
I started having trouble removing the Tank, so I replaced it.
The Fuel Hose that was originally attached was measured to be 7.5mm in inner diameter and 14mm in outer diameter.
Most of the Fuel Hose Spec. have an inner diameter of 8mm, and this product is the only one with an inner diameter of 7mm.
I was not sure, and when I checked the actual product at 0aps for the first time in a while, I found that the product Package
The GPZ900R was found in the list of compatible vehicles on the back.
I was relieved and exchanged this item for a new one.
I'm afraid there would be a lot of inconvenience if the standard and bore diameters were to change...
Yes, Hose clamp is a Quantity:2pc. Set included.
View detail
CB250 Fuel Hose replacement
I replaced the clear hose with this black hose on my Cb250 Export, but the hose clip is too loose and I can't use it. View detail
Just the right hardness
It is not strangely soft or hard, but just the right softness.
I had to turn the hose around to connect it to the Carburetor, but it doesn't crumple even when bent tight.
View detail
No. 1, No. 4, No. 2, No. 3 intake manifolds connected for Hose conversion (Part 1)
This is a conversion from the existing Hose with a 4mm inner diameter to a 6mm inner diameter (item no. 105-064).
Hose with an inner diameter of 4mm is installed from April 2020 to January 2022, and with 36 days of actual use and 4,800 km of actual driving, Color:The gray tones were brownish and blackish with a hardening effect.
Remember to replace it every two years as a consumable.
View detail
Prices were also there, then good quality.
Prices were also there, then good quality. View detail
Since durability is from now, it cannot say anything, but it is somehow good touch!
Since durability is from now, it cannot say anything, but it is somehow good touch! View detail
10mm Fuel Hose
About quality and texture: Seems like a equivalent part for replacing OEM hoses. Products to buy together: I got this to replace the OEM fuel hose for my Yamaha SR400. The rubber hoses tend to get harden after a couple of years exposed to the weather elements. Cost performance and comparison with other products: Decently cheap and overall length of 1 metre Any concerns, cautions, or advice when purchasing: Take note that the product is light greyish in colour rather than the original black View detail
Purchased for Restore for my old car.
The OEM parts were missing, so we used the alternative parts, but we are satisfied with the included clips. View detail
It's neither good nor bad
I used it when carburetorOH.
I used it to come down from the tank and where it branches off into the carburetor.
I think it's thicker and less likely to deteriorate.
View detail
Functionality, quality, price are both GOOD.
It is a non-defective item with three points of functionality, quality and price.
Heatproof temperature (120 ° C) Oil resistance temperature (100 ° C.) It is safe to use because both are specified.
Because it is rich in elasticity, it is easy to exchange and good handling. I think that it is even better if the color is Black instead of Gray.
View detail
To OEM Replace
In old cars, these Hose relationship parts are likely to be missing items. On that point, this point is high as this Hose fulfilled the function as an alternative as I thought.
However, it is difficult to measure Size (Because the Joint part is growing in Hose used for a long time). You might as well choose a little tight inner diameter.
View detail
Texture is pretty good.
I changed Fuel hose when installing Fuel Filter. Feeling touch, supple, resilient With just Rubber, look different, slightly Gray color. Hose itself is a pretty good feeling. The included Hose Band is no better than Toy. Even if I deduct it, I am satisfied with COSPA. View detail
Purchase for attaching Fuel Filter
The appearance also feels like touching a little bit. Compared with ordinary Hose, it is soft and resilient little Gray color. I feel secure.. I think it's pretty good. View detail
Fuel Hose
Because Fuel Hose was deteriorating
Adopt this double structure Fuel Hose
The feeling that I installed is thick and feels like it will take me for many years
Just installed it is about a month so expect in the future
Leaks, cracks etc.. I can not see
There is also a length and it seems that it can be exchanged about twice
View detail
Products of OEMLevel
There is also an inexpensive Hose, but the quality is not good and the Clamp part is around
I get cracked. I do not leak, but it feels bad.
But if you arrange with OEM, it will be a good price, so after all KIJIMA
I continue using Hose.
Inexpensive and usable amount is exactly right for individual use.
As for durability as OEM same etc. I have more (The standard is HondaOEMHose)
View detail
One item as expected
I think that Hose itself is wonderful, but I regret that Hose clip is a skusca. I attached it to the Carburetor and fastened with the attached Clip but pulled out by hand to dismount it. View detail
It is Repeater!
Because it has heat resistance, I think that it is a good item for places that go near Engine. I think that the part that is not black is also squid. I would like to use this product from now on. View detail
Although a pure Parts could be bought, it chose here.It is necessary to check a Parts list etc. at the time of purchase, and to choose the thing of the same bore with it being certainly pure. In my case, since the bore differed in the outside diam
Although a pure Parts could be bought, it chose here.It is necessary to check a Parts list etc. at the time of
purchase, and to choose the thing of the same bore with it being certainly pure.
In my case, since the bore differed in the outside diameter for a while although it was the same, after it extended a little Clip for fixation, it equipped with it.
View detail